Buscar en el registro

Prying on grating when he hyperextended his left knee. Employee was placed on restricted duty.

Employee was punching holes in a rubber belt with a hole punch and a hammer when the hammer slipped striking the employee on left hand thumb area. Employee was placed on light duty for 3 days.

Was working on the boot wash with a screw driver and his screw driver slipped and he poked himself in the left hand.

Was swinging Double Jack while knocking pins back in to bucket bushings and felt something pull in right shoulder.

Was changing the oil on a Kubota tractor. While taking the oil plug off the oil pan his wrench slipped off of the oil plug and he struck the frame of the Kubota, causing numness to his left wrist and hand.

Person was turning screw bolt for the back door of an underground cement carrier truck when his wrench slipped off of the bolt and he hit his back of hand above the thumb on a steel guardrail post.

EE was hammering on a bar to push a large pin out. Once the pin was out the bar was forced to the floor striking his foot.

Employee was attempting to pull a bearing out of a motor with a bearing puller. He caught his finger in the puller.

EE was holding onto a pipe wrench that was on a bolt head, his fellow employee, turned on a air gun and it jerked his arm down very hard, causing pain in his neck and shoulder

The employee was using pipewrench and caught right thumb on suspension rod, causing thumb to bend backwards.

EE WAS ADJUSTING A CONE CRUSHER WHEN THE HEAD OF A RAM WAS BROKEN OFF AND IT FELL DOWN BETWEEN THE CONE AND GRATING. IT STRUCK A DRIVE BELT AND CAME BACK THROUGH THE HOLE AND STRUCK EE IN THE FOREHEAD.

Employee was prying on a hose clamp with a spud wrench. It slipped and struck him in the mouth.

EE WAS LIGHTLY TAPPING A PIN INTO A LARGER CHAIN LINK. APPARENTLY A PIECE OF METAL CAME OFF OF THE PIN ON HAMMER AND STRUCK HIM IN THE NOSE, VERY SMALL OBJECT.

EE WAS USING A HAND WRENCH WHEN THE SLIDE ON THE BOOM MOVED CAUSING A LACERATION TO EE'S LEFT RING FINGER.

EMPLOYEE WAS STRIPPING INSULATION TAPE OFF OF A INSULATOR, THE KNIFE SLIPPED AND LACERATED HIS LEFT ARM.

CUTTING APEXWHEN HIS KNIFE SLIPPED AND CUT HIS RIGHT INDEX FINGER.

EE CUT HAND WITH SAFETY KNIFE.

CUT RT. INDEX FINGER WHILE CHANGING UTILITY KNIFE BLADE. FINGER TOOK SIX SUTURES.

EE HIT HIMSELF IN THE CHIN W/A PRY BAR. THE BAR CUT HIS CHIN REQUIRING 9 STITCHES.

EE WAS WORKING ON AN ELECTRICAL NIP WHEN HIS SAFETY KNIFE SLIPPED AND HE CUT HIS FINGER.

EMPLOYEE WAS REMOVING A BROKEN EYE FROM AN ENGINE CYLINDER FROM HT 3057 WHE HIS HAND SLIPPED STRIKING THE BROKEN EYE CAUSING A LACERATION TO HIS LEFT HAND.

USING A HAMMER TO LOOSEN CORE FROM CORE BARREL. EE SWUNG THE HAMMER TOWARD THE CORE BARREL WHILE HE HELD THE BARREL WITH THE LEFT HAND. HE MISSED THE BARREL & STRUCK HIS LEFT THUMB.

WHEN CUTTING A FOAM FILLED TIRE WITH A UTILITY KNIFE, EE CUT HIS RIGHT LEG CAUSING A LACERATION WHICH REQUIRED STITCHES.

EE WAS ATTEMPTING TO BREAK A BOLT LOOSE WHILE IN THE PROCESS OF REMOVING A TRANSMISSION FROM A LIGHT VEHICLE. WHEN THE BOLT CAME LOOSE, HIS HAND SLIPPED AND HITT THE TRANSMISSION CUTTING HIS L EFT, LONG FINGER WHICH REQUIRED STITCHES.

CUTTING A HYDRAULIC HOSE INTO WITH A HACK SAW, SAW SLIPPED AND EMPLOYEE CUT HIS LEFT INDEX FINGER. (REQUIRED SUTURES)

EMP WAS ATTEMPTING TO SEPARATE A TIE ROD END WITH A PICKLE FORK. FORK WHEN STRUCK BY HAMMER, RECOILED AND STRUCK HIM IN THE LIP.

EMPLOYEE WAS ATTEMPTING TO REMOVE A BULL HOSE FROM A PUMP, USING A COMMON HAMMER TO BREAK THE WING NUT LOOSE. THE EMPLOYEE STRIKING THE WING NUT STOPPED AND ADJUSTED HIS GLOVES. DURING THIS TI ME INJURED ATTEMPTED TO REMOVE WING NUT BY HAND.OTHER EMP DIDN'T NOTICE THIS AND BEGAN TO STRIKE WING NUT AGAIN AND STRUCK INJURED'S LEFT THUMB.

WHEN TAMPING A STICK OF POWDER WATER WITH DRILL CUTTINGS EXITED THE BORE HOLE AND ENTERED HIS EYE (LEFT).

CUT FINGER WHILE TRIMMING PLASTIC TUBE.

EMPLOYEE WAS CUTTING A BAND ON A BUNDLE OF BOLTS WITH WIRE CUTTERS. THE BAND POPPED UP AND CUT THE WRIST OF THE LEFT HAND.

DURING THE INSTALATION OF EXTENSIONOMETERS, THE EMPLOYEE WAS ASSEMBLING THE SET TOOL WHEN THE UPPER SHELL WAS RELEASED BY ANOTHER EMPLOYEE. THE ROD CAME DOWN ON EMPLOYEE'S MIDDLE FINGER CAUSIN G A LACERATION WHICH REQUIRED STITCHES.

BOLTING CROWN ON STEEL SET POSTS WHEN HIS SPUD WRENCH SLIPPED OFF STRIKING HIM IN THE TEETH.

OVER EXTENDED ARM WHILE DOING SAMPPLE PREP & STRAINED ELBOW.

EE WAS STRIKING A MOTOR BOLT WITH A HAMMER A PIECE OF METAL CAME OFF & STRUCK HIM IN THE RT EYE EE FIRST THOUGHT THE OBJECT WAS DIRT HE WENT TO EYE DR ON 05-15-94

WORKING IN A TIGHT AREA, MOTION IS RESTRICTED. HOLDING THE BAR AT THE END AND HIS HAND WAS BETWEEN THE BAR AND THE BEAM.

EMPLOYEE WAS USING A METAL PUNCH TO DRIVE OUT A BUSHING ON A DRILL THE END OF THE PUNCH WAS NOT PROPERLY DRESSED & A METAL SLIVER WAS DRIVEN INTO THE LITTLE FINGER OF THE EMPLOYEES RT HAND THE SLIVER HAD TO BE CUT OUT & STITCHES WERE REQUIRED

EMPLOYEE WAS UNBOLTING A FAN WHEN HIS WRENCH SLIPPED, STRIKING THE FAN BLADES. THE FAN BLADE ROTATED AROUND AND STRUCK HIS LOWER LIP, CUTTING IT. CUT REQUIRED TWO STITCHES.

THE DRILLER WAS IN THE PROCESS OF REPLACING THE DRILL HAMMER. WHILE HOLDING THE NON-ADJUSTABLE PETAL WRENCH WITH HIS LEFT HAND, HE STARTED THE BYPASS ROTATION WITH HIS RIGHT HAND. HE PINCHED H IS FINGERS WHEN THE WRENCH MAD CONTACT WITH THE DRILL MAST.

EMPL REMOVING OLD LINERS FROM THE SOUTH AG MILL BY USING A 3' CROW BAR TO PRY THEM AWAY FROM THE SIDES. ON ONE LINER THE TIP OF THE BAR SLIPPED AND THE END STRUCK EMPL IN THE EAR CUTTING IT.

GROUND WAS ROUGH(DIRT FLOOR WITH SOME SMALL ROCKS).HURRYING THROUGH JOB.INATTENTION OF PRECAUTIONS TO BE TAKEN.TAKING SHORT CUTS.UNDERSIDE OF LOADER LOWER THAN JACK HANDLE.WHEN IN LOCKED POSIT ION.

EMPLOYEE WAS CUTTING A STEAM HOSE WITH HIS POCKET KNIFE WHEN THE BLADE CLOSED ON HIS RIGHT INDEX FINGER, CUTTING HIM.

EMPLOYEE WAS COLLECTING NATIVE SEED TO BE USED IN FUTURE LAND RECLAMATION BY USING A PAIR OF PRUNING SHEARS TO CUT THE SEED PODS. WHILE CUTTING A SEED POD OFF THE BUSH, HE CUT THE TIP OF HIS LITTLE FINGER ON HIS LEFT HAND WITH THE SHEARS.

I,NAME AND A FELLOW EMPLOYEE WERE ATTEMPTING TO PLACE A 250 LB. LIFTER BAR INTO THE MOUTH OF A SAG MILL. THE BAR SLIPPED AND SMASHED HIS FINGER BETWEEN THE BAR AND A CART WHEN IT FELL.

EMPLOYEE HAD FINISHED CHANNELING A SECTION OF 2" VIC PIPE AND WAS RELEASING PIPE FROM THE VICE WHEN PIPE ROTATED DOWNWARD, PINCHING FINGER BETWEEN TABLE AND PIPE.

NAILING DOWN LAGGING ON CHUTE SIDE WHEN AX HANDLE HIT OVERHEAD 8X8 MISDIRECTING THE AXE CAUSING PERSON TO HIT THUMB

HE AND A FELLOW EMPLOYEE WERE DRIVING FENCE POST WITH A FENCE POST DRIVER. HE WAS HOLDING ONTO THE TOP OF THE HANDLES, THE OTHER EMPLOYEE THE BOTOOM. WHILE MOVING THE DRIVER P AND DOWN, THE DRIVER CAME UP OFF THE POST UP ON THE DOWN THRUST, THEY MISSED THE POST AND CAUGHT HIS HAND BETWEEN THE DRIVER AND THE POST.

EMPLOYEE WAS STRIPPING ELECTRICAL WIRE WITH A POCKET KNIFE WHEN THE KNIFE SLIPPED, CUTTING EMPLOYEE'S FINGER. EMPLOYEE WAS WEARING GLOVES. DEEP CUT, POSSIBLE TENDON DAMAGE.

THE INJURED WHILE STANDING ON A MAKE SHIFT RAFT ATTEMPTED TO UNPLUG AN OVERFLOW 36" DRAIN PIPE THAT WAS UNDER APPROXIMATELYM2' OF WATER.HE PLUNGED A BAR INTO A PROTECTIVE SCREEN ON THE PIPE.HE AND ANOTHER EMPLOYEE WERE PULLED INTO THE DRAIN WHICH IS A 20' VERTICAL DROP TO A 90 DEGREE TURN INTO 200' OF 36" DISCHARGE PIPE.HE WAS WAHED OUT THE DISCHARGE PIPE.

THE INHURED WAS LYING ON A MAKE SHIFT RAFT ATTEMTPING TO REACH DOWN AND UNPLUG AN OVERFLOW 36" DRAIN PIPE THAT WAS UNDER APPROX 2' OF WATER.HE WAS ON HIS STOMACH WHEN ANOTHER EMPLOYEE PLUNGED THE BAR INTO THE SCREEN ON TOP OF THE OVERFLOW PIPE,HE WAS IMMEDIATELY SUCKED INTO THE 20' VERTICAL PIPE HEAD FIRST AND WAS DISCHARGED OUT THE 200' DISCHARGE LINE.

EMPL WAS NAILING A BOLT TEMPLATE MON WHEN HE MISSED THE NAIL AND THE HAMMER GLANCED OFF THE FORM AND HIT EMPLS FINGER