Buscar en el registro

Employee was setting wooden forms and struck his thumb with a hammer.

Employee reported he was on the topside of 350 (hot end) taking down scaffolding and while untightening knuckle(scaffold clamp) wrench slipped off nut, resulting in injury to left shoulder muscle.

Employee reported he was using a rod to clean around a conveyor belt. Rod bumped conveyor belt, jamming employee's fingers between rod and structure, resulting in laceration to middle finger and fractures to tips of middle and ring finger.

Emp. was unplugging#2 catchall hopper with lance. While performing,the hose came off spraying hot condensate all over the back of the his legs. He stopped working,and went to check his legs.He told his Supervisor what had happened saying he was ok, and went back to work. On 12-1-12 the medical department was notified of the incident,and RN started treatment immediately.

Emp was prying open 2 flanges to install valve. Utilizing a 3/4 ton come-along & a one inch nylon strap to open flanges. One inch strap broke, causing flanges to slam together with left thumb located in pinch point. One inch nylon strap was not large enough to withstand tension, which resulted in strap breaking. Negative x-ray on 8/22. Nail repositioning done on 8/24/12.

Employee reported he was attempting to open valve in 2-tank Geho area when valve handle slipped/spun causing right middle finger to be pinched between wrench & valve body.

Employee reports hosing pad in 6th tank area when he got caustic on R wrist. RN questioned R wrist when observed on 12/21/11. Stated he washed area well in work area. Medical dept notified by employee several days later.

The employee was swinging a maul at a valve and missed. His neck and scapula starting hurting later in the day. This injury was originally a minor. The injury was not healing so the Doctor sent the employee to physical theraphy making this injury a medical and reportable.

The employee stated he was using a long rod to rod out the bauxite in the day bin and felt a pull in his back.

The employee was swinging a maul and missed what he was swinging at. The employee hit his hand on a valve and fractured it.

The employee was swinging a maul and missed what he was swinging at. The employee stated he felt a pain in the middle of his back. This injury was originally a minor then the employee received a prescription for medicine. This made it a reportable to MSHA.

The employee was swinging a maul and twisted his knee. The employee was beating on a valve that he was re-building.

THE EMPLOYEE WAS SWINGING A MAUL BEATING ON A VALVE. THIS INJURY IS A LOST TIME ACCIDENT.

THE EMPLOYEE WAS SWINGING A KNOCKER BAR AND FELT A PAIN IN HIS WRIST.

THIS EMPLOYEE WAS HOLDING A BOARD WHILE ANOTHER EMPLOYEE WAS STRIKING THE BOARD WITH A MAUL. THIS EMPLOYEE'S FINGER WAS CAUGHT BETWEEN THE BOARD AND A PUMP HOUSING FRACTURING HIS FINGER.

Employee's original injury was minor. His finger worsened and he now has a cast on his hand. He is on restricted duty.

THE EMPLOYEE WAS REMOVING A PIECE OF INSULATION AND HIS PLIERS SLIPPED. THE EMPLOYEES HAND HIT A PIECE OF METAL CUTTING HIS FINGER

THE EMPLOYEE WAS PULLING DOWN ON A TORQUE WRENCH AND HURT HIS LOWER BACK.

Employee smashed his finger hammering on a valve with a large hammer (maul).

EMPLOYEE WAS USING A ROD TO UNPLUG A VALVE WHEN THE ROD BUSTED THROUGH THE VALVE. HIS HAND SLAMMED AGAINST THE VALVE. HE FRACTURED HIS RIGHT THUMB.

EE WAS HOLDING A PIECE OF PIPE FOR ANOTHER EMPLOYEE TO HIT WITH A MAUL. WHEN THE EMPLOYEE SWUNG THE MAUL, EE MOVED HIS HAND AND WAS STRUCK BY THE MAUL. HE ACCIDENTALLY MOVED HIS HAND THE WRONG WAY.

EE WAS OPENING BOXES WITH BOX KNIFE AND LACERATED LEFT HAND AT THUMB BASE.

EE STATES HE WAS CLEANING A FEEDER BELT CHUTE WITH A ROD AND HIT HAND AGAINST PIECE OF IRON.

EE STATES CLEANING OUT DAY BIN FROM BOTTOM USINGSTEEL ROD. BAUXITE FELL ON ROD CAUSING IT TO KICK BACK STRIKING HIM ON LOWER LIP CAUSING LACERATION

EMPLOYEE WAS PRYING A SPENCER AIR COMPRESSOR OUT OF DOOR WAY WHEN THE FILTER FELL ONTO HIS RIGHT NECK AND SHOULDER AREA.

HE WAS USING A HACK SAW TO CUT SOME PIPE WHEN THE SAW SLIPPED AND CUT HIS RIGHT THUMB.

KNOCKING A BEARING HOUSING OFF, IT FELL CAUSING HIS LEFT RING FINGER TO BE JAMMED BETWEEN THE HOUSING AND A PIECE OF METAL.

MAKING SWITCHES WITH A HITTING VALVE WITH KNOCKER BAR, HE MISSED THE VALVE AND HIT RIGHT INDEX FINGER.

CLOSING A VALVE, LAYING A MAUL DOWN, PINCHED RIGHT FOURTH FINGER BETWEEN MAUL AND BENCH. RESULTED IN A CONTUSION WITH INFECTION.

HITTING A VALVE WITH A BEATER BAR AND HIT LEFT INDEX FINGER.