Buscar en el registro

Injured employee was struck on left arm by falling tool. Miner working above was using 2" open end wrench, 24" long, to tighten flange nuts on steam line. Lost grip on tool and it dropped 50' to floor below striking contractor employee sweeping floor. Resulted in 2 stitch cut to left upper arm.

Employee was pounding a lip shroud on a shovel bucket with an 8# sledge hammer to remove the shroud. A small piece of metal from the shroud (1/2"-11/4") flew off & embedded in his left thigh (through coveralls & jeans). The sliver was removed and he rec'd 3 stitches.

Installing 36 ft. track panels on railroad. A panel had been lowered to the ground to be connected. The employee used a lining pry bar to make the connection. The bar was left for a moment and the panel moved causing the bar to strike the employee's hard hat and the hard hat cut the employee's head.

EE WAS TIGHTENING A BALL HITCH ON THE BUMPER OF A PICKUP TRUCK AND IN DOING SO PINCHED HIS PINKY FINGER BETWEEN THE WRENCH AND A SHARP LIP ON THE BUMPER, CUTTING THE TIP OF HIS FINGER REQUIRING STITCHES ON THE END OF HIS PINKY FINGER.

EMPLOYEE WAS USING A HAND HELD BANDING TOOL TO BAND A COUPLING TO AN AIR LINE. WHILE TIGHTENING THE BAND, THE TOOL SLIPPED AND TIPPED CAUSING THE INDEX FINGER OF THE LEFT HAND TO BE CAUGHT IN THE TOOL.

THE EMPLOYEE WAS CHANGING TEETH OF THE LOADER AND WHILE HAMMERING OUT THE KEEPER PIN, THE PIN DISLODGED & RICHOCHET OFF THE BUCKET AND STRUCK JIM IN THE MOUTH. THE EMPLOYEE WAS SENT TO THE CLI NIC AND RECEIVED STITCHES.

WHILE USING A SLEDGEHAMMER THE EE PULLED A MUSCLE IN HIS BACK. EE CONTINUED TO WORK HIS SCHEDULED SHIFTS UNTIL 8/14/02. EE DID NOT REPORT ACCIDENT UNTIL 8/14/02, WHEN HE WAS SCHEDULED BACK.

USING SLEDGEHAMMER TO BREAKHOLE IN CONCRETE FLOOR.

STRIPPING GRATE BARS FROM PALLET. STRUCK GRATE BAR WITH HAMMER, SMALL PIECE OF GRATE BAR FLEW UP STRIKING WORKER IN MOUTH.

CUTTING NOTCHED ON A HOSE REEL WITH A HACKSAW. HACSAW SLIPPED CUTTING INDEX FINGER.

EE WAS SUING A SLEDGE HAMMER AND BEGAN TOP EXPERIENCE BACK PAIN.

EE WAS REMOVING A PIECE OF FLAT BAR FROM A STEEL RACK. THE BAR CAUGHT SOME EXPANDED METAL. THE EXPANDED METAL PULLED LOOSE STICKING THE EE IN THE FACE. THE SMALL CUT THAT RESULTED WAS STITCHED .

EMPLO9YEE STATES THAT WHILE HE WAS POUNDIN OUT BARS ON THE PALLET FRAME, THE HEAD OF THE SLEDGE HAMMER HE WAS USING CAME OFF THE BROKEN HEAD AND HANDLE SMASHED THE END OF HIS FINGER.

EE WAS TRYING TO REMOVE A LINK CLIP WITH HIS KNIFE. THE KNIFE SLIPPED CUTTING HIS THUMB.

THE EE WAS HOLDING A PRY-BAR ON A BOLT. THE BAR SLIPPED OFF THE BOLT PINCHING HIS THUMB INBETWEEN THE BAR AND THE RAILROAD RAIL.

EE STATES WHILE TIGHTENING BOLTS ON VALVE, FELLOW EE'S WRENCH SLIPPED OFF BOLT & STRUCK HIM IN THE UPPER LIP.

EMPLOYEE STATED HE WAS CHIPPING SLAG AND A PIECE OF SLAG HIT HAND AT HIGH SPEED PUNCTURING BLOOD VEIN. EMPLOYEE HAD PIECE OF SLAG REMOVED SURGICALLY MONDAY MARCH 9, 1998

EE STATES HE WAS CUTTING MOTOR LEADS OFF 50HP MOTOR AND BELT KNIFE WENT THROUGH GLOVE AND INTOHAND.

EE STATED WHILE INSTALLING LINERS, HE WAS USING A JACK TO PUSH LINER & LINER SLID & JACK TWISTEDPINNING THUMB BETWEEN JACK & MILLHEAD.

WHILE REMOVING LINERS FROM THE INSIDE OF CONCENTRATE CHUTES, THE EE HIT HIS THUMB WITH A 4# HAMMER. HE SUFFERED A HAIRLINE FRACTURE IN HIS THUMB AS A RESULT.

EE STATES WAS LIFTING BELT ON EXTRACTOR W/CHAINFALL. TURNED AROUND AND JUMPED DOWN TO DECK AND FELT PAIN IN NECK. COULDN'T TURN HEAD.

EE STATES WHILE HAMMERING UP THE SOFTENERS ON THE 4-WAY SPREADERS, MY RT MIDDLE FINGER GOT IN THE WAY OF THE HAMMER.

EMPLOYEE STATES THAT HE WAS TIGHTENING A BOLT WITH AN IMPACT SOCKET TOOL, THE SOCKET CAME OFF THE TOOL AND HIT HIM THE MOUTH.

EMPLOYEE SSTATESI WAS DUMPING BOX IN DRIVE HOUSE AND PINCHED LEFT INDEX FINGER BETWEEN LIFTING BARS.

INJURED STATED THAT HE WAS HELPING TURN THE TEETH ON THE 128 SHOVEL. A SMALL (3 1/16") PIECE OF STEEL FLEW FROM THE PUNCH AND STRUCK EMPLOYEE ON THE LEFT CHEEK. THE STEEL HAD TO BE REMOVED FRO M HIS CHEEK.

INJURED STATED THAT WHILE HE WAS CUTTING A TRANSMISSION FILTER APART TO INSPECT IT, HIS HAND SLIPPED CUTTING THE THUMB OF HIS RIGHT HAND. THE CUT REQUIRED SUTURES.

STATED THAT HE WAS CHANGING NUMBER TAGS ON PALLETS AND STRUCK FINGER WITH HAMMER.

EMPLOYEE STATES THAT WHILE CUTTING THE METAL BINDING STRAPS ON A BUNDLE OF RODS, THE SECOND STRAP SNAPPED AND HIT HER ON THE BACK OF THE RIGHT HAND CUTTING HER.

EMPLOYEE WAS CUTTING STEEL CABLE CONVEYOR BELT TO EXPOSE THE CABLES WHILE INSTALLING VULCANIZED SPLICE.KNIFE SLIPPED AND PUNCTURED LEFT THUMB.4 STITCHES REQUIRED.

WHILE MAKING ADJUSTMENTS TO THE TRUCK DUMPER, A 12" ADJUSTABLE WRENCH FELL OUT OF HIS UPPER COVERALL POCKET AND MADE CONTACT WITH 480 VOLT TERMINAL AND CAUSED AN ELECTRICAL FLASH WHICH CAUSED BURNS TO HIS RIGHT HAND. "NO" ELECTRICAL CONTACT WITH THE INJURED EMPLOYEE.

EMPLOYEE STATES THAT WHILE HE WAS TRYING TO TURN AN ADJUSTER BOLT ON A ROUGHER TAILS PUMP, THE WRENCH SLIPPED AND HE SMASHED HIS FINGER BETWEEN THE WRENCH AND PUMP CASE FRACTURING HIS FINGER.