Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was installing a termination kit on an electrical cable. EE removed EE's gloves and started slicing the outer jacket of the cable with a razor knife using EE's right hand when the knife slipped contacting the right side of EE's left thumb tip causing a 1cmx1cm avulsion to EE's left thumb. Seen by site medic, referred to ER where EE received restrictions
Employee was tightening a bit in the chuck on a magnetic drill press, the chuck key slipped out of the teeth of the chuck causing EE's third knuckle of right middle finger to come into contact with the edge of metal EE was drilling causing a laceration. EE was seen by the medic and referred to the ER where EE received 2 sutures, no restrictions were issued.
Employee got 6' steel stuck and while trying to get it out, he used a bit knocker to loosen the steel ~ in doing so, he was contacted in the mouth with the bit knocker & chipped his teeth. On 10/19/15, he went to dentist to have them repaired. No Days Lost.
Employee was scaling & he let go of scaling bar due to a rock he pried loose fell onto scaling bar. When the scaling bar landed, the end of the bar bounced up & contacted his right knee cap, resulting in laceration which required sutures. Full Release issued. No Days Lost. (This happened on his last shift, then went on days off)
At Herztler Project, Sub-Contractor:Great Basin MSHA ID:#L401: A great basin employee was using a retractable utility knife while cutting the pond liner when the knife slipped contacting his other hand resulting in laceration which required sutures. Full release issued. No days lost. (DEL-HUR#FTX-Contractor, Great Basin#l401 is a sub-contractor under DEL-HUR)
Employee was using a utility knife to cut some materials when the knife slipped & contacted his left hand-palm side causing a laceration. Sutures required. Full Release Issued. No Days Lost.
Employee received a laceration to his right #2 finger while cutting pond liner with utility knife. Sutures required. Full release issued, no days lost.
Employee cut his left thumb while cutting pond liner with utility knife.
Employee was removing casing off a drill rod with pipe wrench, when the pipe wrench slipped off, it resulted in his left hand #4 finger to get caught between ground & pipe wrench causing a laceration. sutures required. full release issued. No Days Lost.
Employee was attempting to remove pin on clevis (on raise bore head) with a hammer, when he struck himself with the hammer on the left thumb. X-rays revealed fracture to thumb.
The employee seated a split set by hand. He then grabbed a hand tool to further seat the split set and in the process of seating the split set, the split set contacted his hand & caused a laceration.
Employee was bending the keeper latch (on a mucker) that holds the air cleaner housing cover in place, while doing so with a pair of pliers, the pliers slipped off the latch resulting in the top of his left hand being struck against the hook on the end of the latch resulting in laceration.
While breaking a piece of ore sample with a crescent wrench, he struck his Left thumb that was holding the rock, causing a laceration which required 4 sutures & chipped the tip of the thumb bone. No days lost. Full release issued.
Employee was hanging utilities & pipe. He was loosening a nut on a v-clamp & felt pain(discomfort) in his left shoulder. He went to medic onsite. We took him to Doctor. X-rays were negative. However, Doctor issued restrictions.
Employee was doing a stope inspection with crew. They were using scaling bars. Employee was barring down on L.side rib while other miner was on R.side of rib.During this time, Employee was struck by the handle end of the scaling bar by other miner.It struck him in back of lower neck causing some discomfort. we took him to ER for xrays, which were negative. Restrictions were issued.
Employee was using a hammer to try to remove the "dog bone" on a haul truck on the front differentials, and it would not move.He stopped hammering & let his left arm go under the dog bone, when it fell on his arm. Xrays were negative, but restrictions were issued. He is working light duty.
Employee was cutting a band off on a ratchet strap, when the knife slipped & cut his finger through his PPE (gloves) and resulted in a laceration to #2 finger on L. hand. He received 6 sutures. Full release was issued. No days lost.
Employee was hitting a cable cutter with a mine axe, when the mine axe slipped off the cable cutter & his #4 finger on L. hand got between the handle & hand rail resulting in a laceration, which required sutures. Full release was issued. no days lost.
Employee was opening a tool cabinet when a wrench fell from tool peg & struck him in the lip. Sutures were required. no days lost
Employee was cutting pipe when a piece of debris flew up & bounced off his right cheek under his safety glasses and into his eye. Doctor issued RX and a full release back to work. No days missed. (This happened on the employees Friday)
Employee was cutting a liner with utility knife. He had left hand on beam, while cutting with his right hand, the utility knife slipped & punctured/cut the palm of his left hand, sutures required. Full release issued. No days missed. This happened on his friday, next scheduled shift is Tuesday 3/15/11.
Employee has driving a bullhorn with a double jack when he struck his left index finger with the double jack, causing a laceration which required sutures. Xrays also showed a small fracture in the tip of index finger. He received a full release.
Employee was cutting tubbing with utility knife, and the knife slipped & cut his wrist, which required sutures. He rec'd a full work release.
Employee was removing a pump liner & his finger got cut with utility knife, which required 4 sutures
Employee was cleaning out the dump gate on a mixer with a short d-handle shovel. The gate closed down on his left hand & his fingers where caught in-between the gate and shovel handle, causing a crushing injury to finger #5.
Employee was cutting slusher cable and a barb from the cable flew off and went into his hand between the two middle knuckles, like a sliver. We sent him to doctor to make sure nothing was in the hand. Doctor looked & cut into hand to make sure it was clear of a metal sliver. 1 suture was required. He has a full release to return to work.
Employee was cutting a hose with a knife when the knife slipped and cut his thumb. The laceration required sutures.
Employee was pulling on a wrench when the wrench slipped causing him to fall backward. The fall resulted in a laceration to the left elbow that required sutures.
Employee was loosening a bolt when the wrench slipped causing his hand to strike a piece of metal. He received a laceration to his right middle finger which required sutures.
Employee was loosening a dywidag with a wrench, when he struck the metal plate, lacerating his finger. On 9/17/08 surgery was performed to secure a bone fracture first identified on 9/16/08.
Driller was cutting a plastic cone with a utility knife when the knife slipped cutting his left index finger requiring sutures.
Employee was using a bar to move a drifter across the floor, when he felt pain in his shoulder.
Employee was tightening a nut on a Jumbo flushing head. The wrench slipped off of the nut, his hand contacted an adjacent part, causing a laceration across the 1st knuckle of the right index finger which required sutures.
Employee was using a sledge hammer when the head of the sledge hammer came off causing him to strike his gloved hand resulting in a laceration that was sutured.
Employee was attempting to remove a plastic end cap from a piece of electrical conduit when his right hand slipped and the blade of the knife he was using penetrated his left hand causing tendon damage which was surgically repaired.
Employee was cutting a sign with a razor knife. The knife slipped and he lacerated his left thumb. Laceration was closed with sutures.
On 11/20/2007, employee was checking scaling ground in his work area and strained his right shoulder. He continued to work as normal until 1/2/2008 when it was surgically repaired.
Employee was handmucking the face, when he experienced pain in his right shoulder. His Dr took him off work on 6/19/2007.
Employee was cutting a metal bar with a hacksaw. Momentum carried his hand forward when the bar broke and his right 3rd finger was lacerated by the bar. The laceration was sutured.
Employee was cutting a water hose with a utility knife. The knife slipped and the employee cut his left index finger. The laceration was sutured.
Employee was barring a rock. It came loose and the bar came up and struck the employee's chin. He received a laceration that was sutured.
On 3/10/2007, employee was using a pry bar to throw a rail switch and strained his shoulder. He continued to work as normal until the Dr. imposed restrictions on the use of his arm on 8/22/2007.
Employee was removing tie wraps from hydraulic hose with a knife. The knife slipped and lacerated 2 fingers on his left hand. The ring finger required sutures.
Employee was prying on a broken coupler part with a screw driver. The screw driver slipped and traveled upward under his safety glasses. He received a corneal abrasion. The injury is reportable for prescription salve applied to the eye at the doctor's office.
Bending rebar on concrete forms. Bent it beepond itself. Rebar slipped and came back smashing finger between.
Employee was cutting bands off a hose with a hacksaw. The second band snapped suddenly, the saw dropped down without resistance and cut the employee's left index finger. This is reportable for sutures.
HE was cutting a patch of 2 X 2 of 100 mil liner with a knife. The knife slipped and cut his right leg, 5 inches above the knee requiring sutures.
Employee was cutting a piece of collar pipe with a hack saw and cut his left index finger. The laceration was sutured.
Employee was cutting open a grout filler tube with a razor knife. He slipped and cut his left wrist with the knife. The injury is reportable for sutures.
Employee was barring a rock from behind screen wire. When rock fell, employee lost grip of scaling bar, bar flipped up and struck employee in the head. Not released to work per his physican treating employee's complaint of dizziness.