Buscar en el registro

While attempting to move a contractors trailer, a Plant Maintenance EE was cranking up a tongue jack that was very stiff to turn. After EE was done, EE noticed that EE had some pain on the outside of the right elbow.

Plant Maintenance employee was trying to free up a preheater ram/block that was not moving with a come along to asist the hydraulic pressure of the ram cylinder. While doing so the come along broke off the hooked end and struck the employee in the right hand.

Employee was using a plasma cutter to make a hole in metal. When employee was striking the metal with a hammer to knock out the piece in the hole, employee felt debris fall on face. Employee wiped the debris off and accidentally rubbed it into eye.

Employee was swinging a sledgehammer to strike the side of a metal structure to dislodge choked material built up inside. Swinging the sledgehammer caused employee's arm to feel weak and sore.

ON 2/16/16, EMPLOYEE WAS SWINGING A SLEDGEHAMMER TO STRIKE THE SIDE OF METAL STRUCTURE AND DISLODGE MATERIAL BUILT UP INSIDE. SWINGING THE SLEDGEHAMMER CAUSED GREAT PAIN TO DEVELOP IN LEFT SHOULDER. Requested medical attention on 2/22/16.

Employee was hitting the outside of Hydrate Bin #3 with a hammer to dislodge choked up material. As he was striking the bin, a cap on an outside spout popped off. Lime shot out of the spout, went behind his glasses and into his eye causing an ocular burn.

Employee was attempting to remove some hard lines on the block inside Loader. The wrench slipped and his right thumb struck against the motor block and peeled his thumb nail backwards, separating it from the nail bed.

Employee was using a shovel to clean up fines material. When he forcefully drove the shovel into the pile, the shovel's head struck a rock that was hidden under the fines material - which he did not see. The shock/force caused trauma/pain in his elbow.

EMPLOYEE WAS USING A T-BAR TO A CLEAR MATERIAL FROM A CHUTE. WHILE PRODDING THE MATERIAL INSIDE THE CHUTE, IT BROKE AWAY CAUSING THE T-BAR THAT HE WAS GRIPPING IN HAND TO SLIDE FORWARD. HIS RIGHT PINKY FINGER GOT SANDWICHING BETWEEN THE T-BAR HANDLE AND STRUCTURE CAUSING A FINGER FRACTURE.

Employee put a fan blade in a vice grip and used a pry bar to try to straighten it out. He placed his other hand on the vice to get leverage. While pushing down on the blade with the bar, the fan blade spun and stuck his left index finger causing a laceration and fracture.

Employee was striking a piece of metal that had become stuck between the roller on the 10A belt conveyor and the chute with a sledgehammer to try to dislodge it. The sledgehammer head bounced off the metal and the sledgehammer head and shaft struck the employee in the mouth, chin and cheek.

Employee was changing out the old skirting on the north side of the 14A conveyor belt. He lay the old skirting across his legs and began cutting it with a utility knife to shorten it down. As he was making his first cut, the knife slipped and the blade stuck him in his right thigh causing a laceration requiring 4 stitches.

Employee was hitting the chute between 7A and 10A conveyors with a sledgehammer in order to loosen choked material. As he was swinging the sledgehammer, he felt pain in his back.

Employee was shoveling a pile of material. He stuck the shovel into the pile and material sprayed behind his glasses and into his left eye. Employee developed superficial eye injury to the cornea.

Employee was using a pry bar to clean around the pulley on the 12C conveyor. As he was pushing down on the pry bar, it slipped from his left hand. The pry bar fell on top of his left hand. His hand was crushed between the pry bar and the pulley structure.

Employee was using a sledgehammer to hit the damper to unchock material. The sledgehammer got hung up on the rails as they swung it back causing his elbow to bend backwards. Employee reported accident on 01/18/12. Employee requested medical treatment on 02/16/12 and given restrictions.

Employee reported feeling pain in her forearms when she had to manually open the hydrator gate, which is done by turning the gate wheel with a 10 foot long metal rod.

The employee was pulling ash ring off the wall of the kiln using a pry bar tool. He lost his balance, stumbled backward and landed on his back.

Employee was using a small hammer to loosen the flint from the limestone on the quarry floor. Employee struck a piece of flint to loosen the material, and some material struck his right hand between the thumb and 1st finger.

EE WAS WASHING A PICKUP TRUCK. AS HE BENT OVER TO USE A LONG-HANDLED BRUSH ON THE SIDE OF THE TRUCK, HE FELT A PULL IN HIS LOWER BACK.

EE WAS REPLACING THE BOTTOM SPROCKET & SHAFT ON A KILN BUCKET ELEVATOR, USING THE HAMMERS TO LOOSEN THE SHAFT FROM THE SPROCKET. A METAL SLIVER CAME LOOSE FROM THE HAMMER, PUNCTURED HIS GLOVE AND BECAME EMBEDDED IN HIS LEFT PALM.

EMPLOYEE CLAIMS THAT HE INJURED HIS LEFT MIDDLE FINGER WHILE ATTEMPTING TO OPEN A MANUAL GATE ON A SCREW CONVEYOR BY STRIKING IT WITH A HAMMER. HE FURTHER CLAIMS THAT WHEN HE SWUNG THE HAMMER, THE HAMMER HIT THE TIP OF HIS LEFT MIDDLE FINGER. HE WAS RELEASED TO RETURN TO LIGHT DUTY AFTER THE LOSS OF ONE DAY OF WORK.

EE CLAIMS THAT HE GOT HIS LEFT RING FINGER CAUGHT BETWEEN A SHOVEL HANDLE AND A GUARD RAIL WHILE HE WAS SHOVELING SPILLED CRUSHED STONE IN ROTARY KILN #3 TUNNEL. HE DECLINED TO SEE A DR UNTIL 8-9-02 AND WAS RELEASED TO FULL DUTY. ON 9-3-02 THE EE UNDERWENT SURGERY FOR REPAIR OF A TENDON. HE LOST ONE DAY OF WORK AND WAS RELEASED TO RETRUEN TO WORK ON LIGHT DUTY.

EE GOT A PARTICLE OF DUST LODGE IN HIS LEFT EYE WHILE USING A POKING ROD TO BREAK UP ASH RING FROM THE DISCHARGE END OF ROTARY KILN #3. HE CLAIMS HE WAS WEARING SAFETY GLASSES AT THE TIME. HE WAS SEEN AT THE MEDICAL CENTER AND EXCUSED FROM DUTY UNTIL HE CAN BE EVALUATED BY AN EYE SPECIALIST.

EE CLAIMS THAT WHILE HE WAS STRIKING THE SIDE OF A STONE BIN WITH A SLEDGE HAMMER, HIS FINGER GOT CAUGHT BETWEEN THE HAMMER HANDLE AND THE EDGE OF A BIN VIBRATOR. HE RECEIVED A CONTUSION TO HI S LEFT RING FINGER. HE WAS SEEN AT CLINIC AND RELEASED TO LIGHT DUTY. NO LOST TIME INVOLVED.

WHILE TRYING TO FORCE OPEN THE TAILGATE OF A DUMP TRUCK WITH A PRY BAR, HE SPRAINED HIS RIGHT SHOULEDER. HE WAS EXCUSED FROM DUTY BY HIS DOCTOR UNTIL HE IS ADMINISTERED AN MRI.

EE SPRAINED HIS RIGHT ELBOW WHILE BEATING ON A BIN WITH A 8 LB SLEDGE HAMMER. HE WAS BEATING ONTHE BIN TO BREAK LOOSE CRUSHED STONE TO ALLOW ITTO FLOW INTO A HAUL UNIT. HE USED THE HAMMER FOR ABOUT 5 MINUTES BEFORE HE CLAIMS HE FELT PAIN INHIS ELBOW. HE WAS RELEASED TO RETURN TO LIGHT DUTY BY HIS PHYSICIAN.

EMPLOYEE CLAIMS THAT HE WAS ROTATING A SHAFT ON TEH PULVERIZED BAGGER WITHA PAIR OF CHANNEL LOCKS WHEN THE SHAFT RELEASED SUDDENLY CAUSING HIM TO STRIKE HIS LEFT ELBOW AGAINST THE FRAME. HE W AS SEEN AT PRO-MED CLINIC AND RESTRICTED FROM USING HIS LEFT ARM, HE IS EXPECTED TO RETURN TO WORK ON 5-9-00.

EE CLAIMS THAT A PARTICLE OF DUST GOT INTO HIS EYE WHILE HE WAS BEATING A REJECT PIPE WITH A HAMMER WHILE HE WAS WORKING ON THE HYDRATE RAYMOND MILL. HE USED TH EYE WASH STATION TO WASH HIS EY E AND CONTINUED TO WORK UNTIL THE END OF THE SHIFT. HE CONTINUED TO EXPERIENCED PAIN AND DECIDED TO SEE A DR ON 12-24-96. HE WAS RELEASED TO RETURN TO WORK ON 12-27-96.

EE CLAIMS THAT WHILE HE WAS TIGHTENING A NUT ON A BOLT AT THE RK#3 FEED BELT WITH A 15/16" SOCKET WRENCH. THE SOCKET SLIPPED FROM THE NUT CAUSING HIM TO STRIKE HIS LEFT ELBOW AGAINST THE METAL FRAME. HE WAS SEEN AT PRO-MED 183 CLINIC AND RELEASED TO RETURN TO LT DUTY.

EMPLOYEE CLAIMS THAT HE GOT STRUCK ON HIS LEFT RING FINGER BY A HAMMER WHILE HE WAS HOLDING A PUSH ROD WHILE ANOTHER EMP WAS USING HAMMER TO STRIKE THE END OF THE PUSH ROD. EMP WAS SEEN AT PRO MED 183 AND RELEASED TO RETURN TO WORK - LT DUTY

EMP CLAIMS THAT HE WAS EXPOSED TO PULVERIZED QUICKLIME WHILE HE WAS HELPING TO CLEAN OUT A VIN. WAS USING A POKING ROD TO POKE INTO BIN TO CAUSELIME TO FLOW. LIME GOT UNDER SHIRT CUFFS AND BOT H WRISTS RECEIVED 2ND DEGREE BURNS. SEVERITY OF INJURY WAS INCREASED BECAUSE HE DID NOT SEEK MEDICAL ATTENTION UNTIL 5-20-96. WAS RELEASED TO LIGHT DUTY 5-24-96.

EMPLOYEE CLAIMS THAT HE HIT HIS WRIST AGAINST A HANDRAIL WHILE HE WAS TRYING TO REMOVE A ROCK FROM A SCREEN WITH A PICK. HE CLAIMS THAT HE PULLED UP WITH THE PICK AND I CAME LOOSE FROM THE RO CK AND HIS WRIST HIT THE RAIL. HE WAS SEEN BY HIS PERSONAL DR AND RELEASED TO RETURN TO WORK ONIGHT DUTY.

EMPLOYEE CLAIMS HE WAS ATTEMPTING TO SE A PRY BAR TO STRETCH A BELT ONTO A MOTOR PULLEY. THE BAR SLIPPED OT OF POSITION, CAUSING AWOUND TOTHE HAND. THE NEXT AFTERNOON THE EMPLOYEE SOUGHT ME ICAL TREATMEN AND RECEIVED 8 SUTURES TO REPAIR THE HAND INJURY.

EMPLOYEE CLAIMS THAT HE SLIPPED AND FELL WHILE UNLOADING A RAIL CAR IN THE SOLID FUELS HANDLING FACILITY. HE CLAIMS THAT HE WAS BEATING THE SIDE OF THE RAIL CAR WITH A SLEDGED HAMMER WHEN HE S LIPPED AND FELL. HE WAS WEARING APPROPRIATE SAFETY SQUIPMENT. HEAVY RAIN WAS FALLING AT THE TIME OF THE INCIDENT. HE WAS TREATED AND RELEASED TO RETURN TO WORK ON LIGHT DUTY.

INJURED CLAIMS THAT HE STRAINED HIS LOWER BACK WHILE TIGHTENTING A BOLT ON ROTARY KILN #1 SCRUBBER FAN. HE WAS USING A LARGE WRENCH TO TIGHTEN THE BOLT. HE DID NOT REPORT THE INCIDENT UNTIL 3-25-94 AND DECLINED TO GO TO THE DR. UNTIL 4-4-94. HE WAS RELEASED TO RETURN TO WORK ON LIGHT DUTY.

EMPLOYEE CLAIMS WHILE HE WAS LOOSENING ROCK WITH JACKHAMMER IN ROTARY KILN #3 PRE-HEATER A FELLOW EMPLOYEE WAS WORKING ALONGSIDE HIM WITH A PICK. WHEN OTHER EMPLOYEE SWUNG PICK IT LANDED ON E MPLOYEES LEFT FOOT. EE WAS SEEN AT PRO-MED 183 CLINIC WHERE HE WAS TREATED FOR A CONTUSION & RELEASED TO RETURN TO WORK ON LIGHT DUTY.

EE CLAIMS THAT WHILE HE WAS TRYING TO REMOVE A BEARING FROM ROTARY KILN 234 DUST SCREW HE WAS HAMMERING ON THE BEARING WHEN A CHIP OF METAL FLEW OFF AND GOT EMBEDDED IN HIS RIGHT INDEX FINGER. HE WAS SEEN AT ST. DAVID HOSPITAL WHERE THE METAL CHIP WAS SURGICALLY REMOVED. HE WAS RELEASED TO RETURN TO WORK ON LIGHT DUTY.

EE CLAIMS THAT HE FELT A SHARP PAIN TO HIS LOWER BACK WHILE HE WAS PUSHING ASHRING FROM ROTARY KILN #3. HE WAS USING AN ASHRING BAR TO PUSH THE ASHRING FROM THE KILN. HE WAS EXUCSED FROM DUTY BY HIS DOCTOR AND THEN RELEASED TO RETURN TO WORK. ON 1/5/94.

EE COMPLAINED OF PAIN IN RIGHT SHOULDER. SHOULDER BEGAN HURTING ON 11-10-93 WHILE HE WAS AT WORK. EE STATED THAT THERE WAS NO TRAUMATIC EVENT THAT CAUSED THE PAIN. HE HAS TO CARRY A GREASE GUN ON HIS SHOULDER EVERY DAY & BELIEVES IT MAY HAVE CAUSED A SHOULDER STRAIN.

EMPLOYEE CLAIMS THAT HIS LEFT SHOULDER BEGAN HURTING HIM AFTER HE HAD BEEN CUTTING AND SKINNING ELECTRICAL WIRING. TASK REQUIRED LIFTING NAD MOVING THE WIRES.

EMPLOYEE CLAIMS HE WAS SHOVELING ASH RINGS FROM THE FRONT OF THE ROTARY KILN #2 TO THE DUMP CHUTE. THE SHOVEL HE WAS USING JAMMED AGAINST A PIECE OF ASH RING AND HE FELT SOMETHING POP IN HIS L OWER BACK. HE WAS TREATED AT PRO-MED MINOR CENTER AND RELEASED TO RETURN TO WORK ON LIGHT DUTY. INJURY WAS DIAGNOSED AS A LUMBAR STRAIN. EMPLOYEE WAS WEARING A WAIST SUPPORT BELT.

EMPLOYEE CLAIMS THAT HE RECEIVED A LOWER BACK SPRAIN WHILE PULLING AN ASH RING FROM ROTARY KILN #1 FIRING HOOD WITH A METAL RAKE. HE DECLINED TO GO TO THE DOCTOR UNTIL 3-22-93 AT WHICH TIME HE WAS RELEASED TO RETURN TO LIGHT DUTY UNTIL FURTHER NOTICE.

EE CLAIMS THAT HE WAS PUSHING ASH RINGS AT ROTARY KILN 3 WITH A 15 LB PUSH AND POKER ROD AND WHNE HE TOOK HIS GLOVES OFF HE NOTICED THAT HIS FINGER HAD BEEN HURT. HE APPARENTLY SMASHED HIS FIN GER AGAINST THE FIRING HOOD DOOR AS HE WAS PUSH ING ASH RINGS THE EE WAS TREATED AT THE MINOR EMERGENCY CENTER AND RELEASED TO RETURN TO WORK ON LIGHT DUTY.

EE WAS ASSISTING IN REMOVING ASH RINGS FROM 1 ROTARY KILN USING A METAL RAKE BAR. THE RAKE BAR SLIPPED OFF OF A ASH RING AND THE EE DROPPED THE BAR. ANOTHER RAKE BAR WAS DROPPED ON TOP OF HIS AND AS HE WENT TO PICK UP HIS RAKE BAR. THE EE SUSTAINED 2ND DEGREE BURNS TO LEFT FOREARM.

I WAS CUTTING OFF THE EPR FOR THE HUG WHEN KNIFE CUT THE THIGH ON MY LEG.

EE WAS SHARPENING HIS KNIFE & CUT HIS LEFT HAND BETWEEN THUMB & INDEX FINGER CUT WAS TWO & ONE HALF INCHES LONG BOTH PIECES OF EQUIPMENT INVOLVED WERE PERSONALLY OWNED BY EE

USING BARS AND HAMMERS TO CHIP OFF LIME BUILDUP IN CHUTE CHUNK FELL HIT THUMB

EMPLOYEE WAS WORKING ON RK- 527 #3 BIN WHEN ANOTHER EMPLOYEE HIT THE BIN WITH A SLEDGE HAMMER CAUSING SOME LIME CHIPS TO FALL OFF THE BIN AT THE SAME TIME I NAME HAD PULLED HIS GLASSES DOWN WH EN HE PULLED THE GLASSES DOWN SOME LIME GOT INTOHIS LEFT EYE HE WAS TREATED BY DR & RELEASED TO RETURN TO WORK ON 10-04-91 PRESCRIPTION MEDICATION PROVIDED

EMPLOYEE CLAIMS HE GOT A THORN STUCK IN HIS KNUCKLE AT THE LEFT RING FINGER WHILE HE WAS TRIMING SOME LIMBS OFF OF SOME TREES LOCATED ALONGSIDE THE ROAD BY STOCKPILE #3.HE REFUSED TO GET PROFE SSIONAL MEDICAL ATTENTION AT THE TIME OF THE ACCIDENT,HOWEVER,DECIDED TO SEE A DCOTOR AFTER HIS AHND BECAME SWOLLEN ON 07-18-91.HE WAS RELEASED TO RETURN TO WORK ON LIGHT DUTY.