Buscar en el registro

A fully trained miner was removing a keeper pin when EE was struck on the finger by a hammer. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was rolling track rail when the roller slipped off rail causing miner to fall onto a track jack. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a sledge hammer to break a rock when a piece of the rock flew under glasses and hit them in the eye. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a come-a-long when the come-a-long slipped and struck EE in the shoulder. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was attempting to re-rail a supply car. While jacking the car up EE injured EE's shoulder. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a bar to roll rail when the rail caught a tie causing it to roll back toward EE injuring EE's back. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was operating a breast drill when they experienced pain in lower back. The injury was not the result of any compliance issues nor were any protective guards involved.

Contractor employee was using a razor knife to cut belt for making a vulcanize splice. The blade contacted a knee. Cause of this injury was employee awareness, compliance with rules/regs, PPE, mining equip/systems not a factor. Miner proficiency may be a factor

A fully trained miner was assisting in re-railing a motor when EE's finger was pinched in the jack walkers. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was prying a sand prop from under the longwall mule when the prop came free and smashed EE's finger between the mule and the prop. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a come-a-long to change belt structure when the monkey plate that it was hooked to broke allowing the come-a-long to strike their right knee. The injury was not the result of any compliance issues nor were any protective guards involved.

IE was struck in right hand by come-along hook while profiling belt structure causing fracture. Miner was trained, in compliance with law and wearing required PPE.

While prying down material, IE fell and sprained right ankle. Miner was trained, in compliance with law and wearing required PPE.

A fully trained miner was using a track jack when the jack sprung back and the bar hit miner in the right side of head. The injury was not the result of any compliance issues nor were any protective guards involved.

A prep plant employee was using a screw driver to pry on EE's locker in the bath house when the screw driver slipped and struck EE above the right eye. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was rolling a rail when the steel the employee was using rolled back and struck them in the chest. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a hammer to hit a pump trying to unclog it when EE missed the pump and struck self in the leg. The injury was not the result of any compliance issues nor were any protective guards involved. NOTE: Employee did not begin missing work until 5/11/2019.

A fully trained miner was using a utility knife to cut belt when the knife contacted left leg resulting in sutures. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was installing a pulley on a belt drive when the come-a-long EE was using slipped allowing the pulley to strike EE in the right arm. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was holding a hose while another miner used a knife to cut the hose. The knife slipped and cut the employee on the right hand resulting in 3 stitches. The accident was not the result of any compliance issues nor were any protective guards involved.

While using a come-along to separate longwall dollies on the monorail, the hook broke free and struck employee on the forehead.

A fully trained miner was tightening a fitting on a miner when the wrench slipped causing the employee's hand to strike the miner resulting in a laceration. The accident was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a bar to pry a belt roller when the bar slipped and right hand was caught between the bar and roller. NOTE: Employee did not begin to miss work until 8/6/2018.

A fully trained miner was attempting to remove a longwall chain flight and was beating a bolt with a hammer when a piece of metal sheared off the hammer and struck EE in the left leg. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was moving track rail with a stone bar when EE experienced a pain in lower back. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was cutting a piece of conveyor belt when the knife slipped and cut their upper left leg. Miner received stitches and a tetanus shot and returned to work the following day. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner injured right pinky finger when using a come-a-long to raise belt structure. The handle sprung back and pinched finger causing a fracture. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was pounding rivets on a belt splice when EE hit thumb with the hammer. The injury was not the result of any compliance issues nor were any protective guards involved.

Contract employee was using a razor knife to cut a hard plastic lid protector on a quart can, the knife slipped and EE cut EE's wrist. Cause of injury was cutting towards self and hand placement. Compliance with company rules and miner proficiency a factor, PPE, mining equipment/system not a factor.

A fully trained miner was installing a rib bolt when they caught a finger between the bolt wrench and the bolt head. The injury was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a hammer and chisel to take apart a coupler when a piece of metal sheared off and struck in the left arm. The injury was not the result of any compliance issues nor were any protective guards involved. The accident was not reported until 04/03/2018.

A fully trained miner was shoveling under the belt when the shovel contacted the bottom belt causing the shovel to pull their right arm and injure the shoulder. The accident was not the result of any compliance issues nor were any protective guards involved.

Employee was installing beam clamp with gear box rotated on chain fall pinning employees foot against C-Channel causing the ankle to be injured.

A fully trained miner Strained miners back when jacking rail up. The jack let loose while jacking causing the strain. The incident was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner injured their back while prying a wheel from a hub. The incident was not the result of any compliance issues nor were any safety guards involved. Employee did not start missing work until 10/02/2017.

A fully trained miner was injured when putting a bolt in the roof. While using a bolt wrench to tighten the bolt the wrench broke striking lip. The accident was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was using a come a long to pull track rail and while jacking felt a sharp pain in their back. The injury was not a result of any compliance issues nor were any protective guards involved.

A fully trained miner was cutting conveyor belt when the knife came off of the belt and cut into EE's Rt. leg. No compliance issues were a factor nor were any protective guards involved.

A fully trained miner was cutting a conveyor belt when knife slipped from the belt and cut Rt. leg resulting in a laceration. The injury was not a result of any compliance issues nor were any protective guards involved.

A fully trained miner received Medical Treatment for an accident that resulted in stitches when miner was miner was using a hammer and chisel and a piece of metal was embedded in miners left cheek. The accident was not the result of any compliance issues nor were any protective guards involved.

A fully trained miner was injured when using a splice knocker and a hammer, the individual missed the knocker and hit themselves in the left thumb with the hammer. The injury was not the result of any compliance issues nor did it involve any protective devices.

While using a come-a-long to remove a cable reel from a shuttle car, the come-a-long slipped from the roof strap and pinched small right finger between the come-a-long and the shuttle car.

While using a box cutter to cut zip ties, individual cut rt. index finger.

While cutting a slick line on the longwall tailgate, the bow saw slipped and cut the individuals right index finger. (Received 6 stitches)

While changing a top roller on the #17 belt after it was emptied, locked and tagged out, the come-a-long being used to raise the top belt slipped allowing the top belt to drop. The individual was between the belts changing the roller and the top belt pushed EE's head into the structure causing a laceration to EE's right ear and a fracture to EE's skull.

While using a knife to cut neoprene, the individual's right hand slipped and caused the knife to cut left hand between the thumb and palm.

While uncoupling hoses and using two hammers, a metal shard broke off and hit the individual in the neck.

While using a jack to jack the track up, the bar slipped and rolled causing a strain to the individual's right shoulder.

Holding a hose while another individual was using a hammer to hit the coupler when a piece of metal sheared from the coupler and went into the injured person's left index finger.