Avísenme cuando se presente un nuevo incidente de la MSHA en MARSHALL COUNTY MINE.
Employee was removing dollies from monorail when EE's finger got caught between 2 wheels. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was changing a piece of belt structure when the frame slid, and EE's finger was caught between bed rail and frame. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping unload structure from scoop when EE dropped structure on EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was bolting when the pusher steel slipped out of EE's hands and hit EE on the head. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was putting supplies on miner when EE picked up a rib strap when it cut through EE's glove. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was working on air lock doors when a rock fell from roof and struck EE's lip. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was pulling shuttle car slack to hang when EE felt pain on the right side of EE's chest. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was center bolting when EE was reaching for plate and EE's finger got caught in drill guide. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was lifting miner cable and water line into hanger when EE felt pain in lower back and leg. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was running shearer when a rock came off the drum and struck EE's hand. Mining systems was not a factor, compliance with rules and regulations was not a factor. PPE was a factor.
An unplanned roof fall occurred on 5/4/26 at 8:22 am. The fall measured 16'by 40'long. The fall occurred in #6 entry 83 cross cut in 5 North. The area was posted on all sides and dangered off.
Employee was carrying 20' beams through mud. The employee got EE's foot caught on a cable bolt that was sticking out of the mud, causing EE to fall with the beam in EE's hands. Employee fell to the ground, crushing EE's left hand under the beam and EE's body weight.
Employee was walking down the face when EE tripped over a rock and injured EE's knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was scaling rock down from top when a piece of rib started to come down. While EE was moving away from rib EE slipped and fell injuring EE's knee and ankle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was spotting belt structure when EE twisted around and felt pop in lower back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was at the miner hanging cable and water line into hanger when EE went to pull down on cable, EE felt pain in EE's shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was cleaning slate off of the top of EE's canopy when another piece of slate came down and hit slate bar and a piece hit EE's face. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping pull belt off of dolly when the belt grab slipped off belt and struck EE's nose. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was walking to center bolter when EE slipped and fell, EE tried to catch self and cut the top of EE's hand on a piece of slate. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was helping work on scoop battery when battery lid came down and hit EE's elbow/bicep. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE was a passenger in a mantrip that was travelling into a track spur. The mantrip struck a dolly that was unseen by the driver, and IE's back struck EE's seat hard. Employee continued to work without restriction until seeking medical attention on 4/24/2026, and began missing days after that. Injury was not the result of a training or compliance issue.
Employee was drilled hole for rib pin and turned around to grab strap when piece of rib hit EE's back and shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was loading waterline onto scoop for belt move. When one of the water lines pipes slid off the scoop and struck EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was cleaning on LW face when another employee was attempting to pass EE, that employee slipped and fell and the miner that was cleaning tried to catch EE and injured EE's back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was working on LW face at 12 shield when rock came over handrail and struck the back of their leg. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping hang miner cable and water line into a roller hanger when they felt pop in their upper arm (bicep). PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was working on a cable repair when knife slipped and cut their finger, causing them to receive stitches. PPE was a factor, mining systems was a factor, compliance with rules and regulations was not a factor.
Employee was at the miner when a piece of rock fell from between straps and struck the top of EE's foot causing a contusion. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was working on shearer spray arm, when lifting eye that come a long was hooked to broke causing lifting eye to hit their hand. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping use cobra drill when drill was collapsing, they strained their shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Employee did not start missing until April 6th.
Employee was helping switch cars in belt spur when motorman #2 pushed cars towards EE. EE was standing near motor when EE's foot was injured. PPE was not a factor, mining systems was not an issue, compliance with rules and regulations was not an issue. Body placement was an issue.
Employee was operating mantrip dragging slick line when rope that was attached to pipe broke and piece of metal from rope struck EE's elbow. PPE was not a factor, mining systems was not a factor, compliance with rule and regulations was not a factor.
Employee was sitting in a track spur when another mantrip came into ride and struck EE's ride. Causing contusion to EE's back and shoulder. PPE was not a factor, mining systems was not a factor.
Employee was sitting in a track spur when another mantrip came into spur and struck EE's ride. Causing injury to EE's head and chest. PPE was not a factor, mining systems was not a factor.
Employee was riding in mantrip when the mantrip went into a spur and struck another ride, injuring employee's back and neck. PPE was not a factor; mining systems was not a factor.
IE was travelling on the mainline track on a golf cart and encountered a motor trip travelling toward them. They attempted to get out of the way but was unable, and was struck by the motor.
Employee was rib pinning when vent tube fell and knocked them down, causing them to injure a hand, PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was re railing a car when car shifted and pinched finger between car and jack. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was working on taking green pump hose apart when EE's knife slipped and cut the back of EE's leg (calf). PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee stepped down off of motor when EE stepped on a piece of coal and injured EE's ankle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was spotting rollers and shoveling belt when EE felt pain in EE's hand. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was cleaning at belt tail when EE stepped into a hole and twisted EE's ankle. EE also fell and injured EE's wrist. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
Employee was operating dump truck when it became stuck in mud. While attempting to get pushed out of mud by another piece of equipment, the dump truck moved or jolted causing employee to injure their neck. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 3/5/2026 at 11:50 am. The fall measured 16' long by 13' wide by 8' high. The fall occurred in #1 entry just in by 90 crosscut in the 6 South Mains. The area was dangered off and will be cleaned up.
Employee experienced skin irritation following a cumulative exposure to water over their boots while searching for a damaged coupler. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
Employee had finished bolting on EE's side and went to assist EE's bolting partner who was struggling with setting EE's drill steels out of the top. EE asked EE's bolting partner to lower the drill pod a little bit but instead EE brought it down all the way on top of the employees right foot.
Employee and coworkers were jacking up the belt to change rollers, when the chain attached from the come along to the belt structure snapped causing the structure to fall and the employee to fall to the ground with it.
Employee was cutting green hose with utility knife when it slipped and cut finger. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was changing rollers during outage when they took roller out of frame, the roller dropped and struck their hand. Palm of hand was between roller and frame. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was standing on side of center bolter waiting to bolt when a piece of slate fell and struck their neck and part of their leg. PPE was not factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee assisted with loading roll of belt on scoop when roll of belt shifted and came back injuring EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 2/16/26 at 8:10 pm. The fall measured 16'wide, 60' long and 4' high. The fall happened on the belt line at 3-36 xc and was dangered off and will be cleaned up.
Employee was loading a roof bolter with supplies when EE felt pop in EE's knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was cutting bands on roof straps with knife when the knife slipped and cut EE's upper leg. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was walking and stepped in hole and twisted ankle. PPE was not a factor, mining systems was not a not a factor, compliance with rules and regulations was not a factor.
Employee was center bolting, while retrieving steels, a steel let loose and struck EE's wrist. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was pass through man door when they slipped on a rock and fell, landing on right knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was carrying a roller from track to belt when they slipped and fell injuring their thumb. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was prepping a splice cutting outer jacket, when EE cut EE's thumb. Receiving stitches. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was pulling a CBS blade with their right arm when they felt a pull
Drill steel fell out of the top striking and cutting the employee's right middle finger.
Employee was walking past a trip of supply cars when their hand came into contact with a standard (metal pipe used to keep supplies on car). This caused them to cut their hand. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was bolting off miner when steels fell out of top and struck their knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE was carrying v-deck into and down the beltline. They stepped on uneven bottom and rolled an ankle. Injury was not the result of a training or compliance issue.
Employee was shoveling belt when shovel got caught causing them to hit hand against bed rail. PPE was not a factor, mining system was not an issue, compliance with rules and regulations was not a factor.
Employee was moving miner cable to rib when they felt pain in their back. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was working on a section fan that was just unloaded at the end of the track. A Trip of cars was being moved when it struck a motor and dolly at the end of the track, causing the dolly to come off track and hit fan. The fan moved sideways, causing the fan to pinch miner between coal rib and fan.
Employee was hosing down catwalk at prep plant when EE slipped and fell injuring EE's wrist. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was walking along stage loader when a rock struck EE injuring EE's finger. Mining systems was not an issue, compliance with rules and regulations was not an issue, PPE was an issue.
Employee was changing skirt rubber on belt line when they slipped and fell causing them to cut their arm and receive stitches. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was loading roof straps from car to scoop when they picked up stack of straps they felt pain in lower back. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue. Body positioning was an issue.
Employee and 2 fellow workers were holding onto a winch they took off of a push pole when it slipped, they lost grip of the winch, and it came down onto their right foot.
An unplanned roof fall occurred on 12/26/25 at 11:59 am at 34 3/4 crosscut on 5 north #1 entry. The fall length was undetermined at the time of the fall. The fall was dangered off and will be cleaned up and bolted.
Employee was assisting with removing shuttle car tire when EE had EE's hand behind the tire, the tire shifted pinching EE's finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was standing near the LW headgate watching a job, when a rock fell from between straps and struck the back of their ankle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping work on belt pulley when EE said EE was carrying chain fall and felt pain in EE's right chest muscle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
While walking on the beltline, a rock fell from the top and struck the back of the employees neck and then landed on EE's hand.
Employee was working on locomotive when lid lock let off and pinched arm between motor and cover. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was rib pinning off miner when EE pinched EE's finger between chuck and bolt wrench. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was carrying a jack onto the belt line when EE felt pain in EE's shoulder, PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue. Employee worked 4 shifts then re-injured the shoulder (12/9) carrying belt structure and starting missing work on 12/10.
Employee was hanging slack for bolter when EE went to walk around machine, EE twisted EE's ankle. PPE was not a factor, mining systems was not a factor, compliance with rule and regulations was not a factor. Body positioning was a factor.
Employee was working at power center when EE stepped back and twisted EE's knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was removing old belt structure when left index finger was caught between the top of the new frame and an old bottom roller.
Employee was removing structure to build drive, when a piece of bed rail fell and struck EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 11/21/25 at 3:10PM at 56-57 xc #1 entry. The fall length was undetermined at the time of the fall. The fall was dangered off and will be cleaned up and bolted.
Employee was helping unload short sticks of rail at shanty when one rail rolled and pinched finger in between another short stick. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was loading beams onto crib scoop when beam rolled off and fell on a finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was bolting when bolt came down out of the hole and plate struck their lip. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee picked up a bag of rock dust; while carrying it they felt pop in back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor, body positioning was a factor.
Employee was prepping bolts at the miner when rib fell out and a piece hit them on the back causing an abrasion and bruising. PPE was not a factor, mining systems was not an issue, compliance with rules and regulations was not an issue.
At approximately 3:02 the Blake Ridge elevator went down due to governor switch had grease from the elevator ropes that set the governor switch off. One surface electrician came to clean the switch and the elevator ran as normal. The elevator was up and running at 3:34 pm.
Employee was assisting with installing rail in a spur when a piece of slate fell and struck neck and shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was at tool car getting a tool when another employee was filling degreaser sprayer. The hose on sprayer popped off and the liquid got in their eyes. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was walking down the Longwall face when piece of rock came out of the pan line and struck their leg. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee removing belt for storage unit when they tripped and injured left ankle/foot. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was rib pinning when they grabbed rib strap, it cut through glove and cut finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was walking to miner when piece of rib fell onto EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was grabbing roof mesh to install, when corner of mesh hit EE in the face and scratching EE's eye. Mining system was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was working at the tail of #14 prep plant belt and was using a come along to tighten belt clamps when a chain broke striking EE in the right knee resulting in a sprain.
Employee was z drilling on belt line when EE squeezed trigger and felt pop in wrist. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was picking up concrete block that was stuck in the mud, when EE went to pick it up, EE felt pop in EE's shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 10/10/25 at 11:25pm 35 xc on Corridor #3 entry. The fall measured 10'high by 25' long and 16'w. The fall was dangered off and will be cleaned up and bolted.
Employee was Bolting off miner when EE advanced vent tube EE pinched EE's finger between tube and rock deflector. PPE was not an issue, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was handling belt structure when they felt sharp pain in shoulder. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was walking along trip of cars when EE sprained right ankle. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was throwing track switch when the handle came back and struck EE on the right shin. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue, body positioning was an issue.
Employee was walking along belt drive when EE stepped on a nail. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was installing rib pin when rock fell out and struck EE on the head injuring EE's neck and shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was installing rib strap when rock hit strap causing it to slide down and cut hand through glove. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee just finished hanging longwall jumper cables in the track spur. Started to step away when the hooks straightened and jumper cables fell onto left shoulder. (coupler for one the cables struck on the top of EE's left shoulder)
Employee was spotting belt structure when felt pain in EE's lower back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was getting roof strap off of miner when EE fell backwards and strained EE's knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 9/29/2025 at 10:19am at 15 1/2 crosscut in 6 North 3 East #2 entry. The roof fall measured 16' wide by 8' high and approximately 14' long. The fall was dangered off and will not be cleaned up.
Employee was changing rollers when EE came into contact with a piece of roof screen on the middle of EE's back. PPE was not an issue, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was center bolting when EE went to remove steels from roof, one of the steels came out of roof and hit finger. PPE was not a factor, mining systems was not a factor, compliance was not a factor, hand placement was a factor.
Employee was climbing down off of 777 dump truck, when they slipped off of bottom rung on ladder. They felt a pop in knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Employee worked after the injury until March 4th 2026, when they began missing time for surgery.
Employee was changing steels in air drill when handle swung around and struck leg. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was operating full face miner when a piece of slate fell out and struck their hand. Mining systems was not a factor, compliance with rules and regulations was not a factor. PPE was a factor.
A rock fell out of the roof on a beltline and struck employee in the ankle. Injury was not the result of a training or compliance issue.
Employee was carrying monorail on shoulder when they tripped and fell, they dropped monorail on foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred at 9/15/2025 at 8:19am at 12-30 wall 4-5 xc. The roof fall measured 15' long by 16'wide 10'high. The fall was dangered off and will be cleaned up.
An unplanned roof fall occurred on 9/12/2025 at 2:00PM at 47xc 5 North #6 entry. The roof fall measured 8'high by 16'wide. The fall was dangered off and will be cleaned up.
Employee was helping carry a z drill when their partner sat one end down, it caused the employee to turn awkwardly and twist their knee. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue. Body positioning was an issue.
Employee was dragging wash down hose to clean at the plant when they struck their head on a pipe. PPE was not a factor, Compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was carrying a stick of water line with another miner when EE stepped on a piece of slick line and injured EE's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was tramming shuttle car when EE hit a hole and while holding on EE felt pop in shoulder. PPE was not an issue, mining systems was not an issue, compliance with rules and regulations was not an issue.
Employee was loading roof straps onto scoop when one of the straps rolled over out of EE's hands and cut EE's wrist. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was hauling shields with motor, when motor came off track they struck against the kitchen resulting in bruising and strained muscles. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall on 8/27/25 at 3:25pm on Mainline 12 track 14xc. The roof fall measured 16' wide by 30' long and 10' high. The fall was dangered off and will be cleaned up.
An un-planned roof fall occurred on 8/24/2025 at 12:48am on Mainline 15 track 13xc. The roof fall measured approximately 16' wide by 50' long and 10' high. The fall was dangered off on both sides and will be cleaned up.
A 4'x4'x 1/4'' steel plate guarding fell (old piece being removed) pinching the employees finger between the plate and backhoe slope mucker handrail.
Employee was removing crib from under the pan. Pan came off of scoop and struck their left hand, crushing their fingers
An un-planned roof fall occurred on 8/20/2025 at 12:04 am. The roof fall measured approximately 16'wide by 50' long and 6' high. The fall was dangered off on all sides and will be cleaned up.
Employee was working on taking slack out of loader cats. when EE went to remove tool there was still pressure on it the tool and grease struck EE in the face and eye. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping with belt splices when they stepped away to clean their glasses they were struck in the eye by a piece of rivet. PPE was a factor, mining systems was not a factor, compliance with rules and regulations was a factor.
Employee was loading belt structure into scoop bucket. They had their hand on the bucket when it was hit by another piece of belt structure. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations not a factor.
Employee was carrying roof straps from track to belt when they slipped and fell injuring a shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was z drilling and went to bring the bolt up, when the spin got caught. The drill head and cylinder snapped off and hit their right hand.
Employee was helping load center bolter, EE pulled cable bolt from scoop and hurt EE's shoulder, PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor .
Employee was moving cables on LW when EE strained EE's shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was changing steels on pan line bolter when EE's foot slipped and was caught under the drill pod. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. body positioning was a factor.
Employee was assisting with pulling up miner cable slack when piece of roller hanger broke off striking them in the leg. PPE was not a factor, compliance with rules and regulations was not a factor.
Employee was installing a rib bolt when the rib strap swung down hitting their hand and cutting a finger through their glove. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was moving feeder cable when they felt pain in shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. EMPLOYEE DID NOT START MISSING WORK UNTIL AUGUST 13th.
An unplanned roof fall occurred on 07/26/2025 at approx 11:15 am on 5 North #2 belt at 45xc. The roof fall measured approx 16'W x 121'H x 70' L. The fall was dangered off on all sides and will be cleaned up.
Employee was hanging miner cable and water line onto roller hanger when they felt pop in the middle of their back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was attempting to assist to move power center cars. Employee was walking into the track spur and slipped, tripped and fell over a piece of pipe. The cause of this incident was improper body mechanics. PPE was not a factor, mining systems was not a factor, compliance with rules and regs was not a factor, miner proficiency was a factor.
At approx 2:57am on 7/23/25 an unplanned roof fall occurred at 15-17xc on the haulage. The roof fall measured approx 16'w x 10'h x 40'l. The fall was dangered off on all side and will be cleaned up.
Employee was attempting to lower pipe from the rib line. The EE let the pipe down to fast and injured EE's left ribs. The cause of this incident was improper body mechanics. PPE was not a factor, mining systems was not a factor, compliance with rules and regs was not a factor, miner proficiency was a factor
Employee was unloading a beam from the scoop. When they went to set the beam down, the rib rolled and large pieces of material struck them in the back, neck and back of their head.
Employee was loading beams onto mule when one of the beams pinched a finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was lifting track jack off of motor when EE felt pain in EE's stomach. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was walking onto the face when a rock came down between straps and struck EE's neck and back. PPE was not a factor, mining systems was not a factor, compliance with rule and regulations was not a factor.
Employee was bolting off miner when hole was clogged and get got dirt in EE's face and into EE's eye. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was helping with Longwall set up when EE walked away and stepped over pan line and twisted EE's ankle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was helping re-rail a man trip when their arm was caught between the top of the bus and a water line. PPE was not a factor, mining systems was not a factor, compliance with rule and regulations was not a factor, body (arm) positioning was a factor,
Employee was recovering rail when hook slipped off rail causing rail to strike EE's foot. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor, body positioning was a factor.
Employee was operating miner when rock fell out between straps and struck EE on the head and shoulder. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was working at the mainline # 13 belt drive when they were injured. Employee was attempting to lift a vulcanizing plate into position when they experienced pain in left shoulder.
Employee was driving a scoop, parked it, got out and started carrying beams. They then proceeded to walk up the face with a beam on their shoulder, when taking the beam off their shoulder the person carrying the other end of the beam spun the beam when setting it down, which caused the injury.
On 7/2/2025 an unplanned roof fall occurred at 13-37xc track to neutral entry. The fall was approx 16'w x 50'L x 10'H. The fall was cribbed off and won't be cleaned at this time.
Employee was assisting with lifting chain barrel onto car when they cut their hand on metal ring at bottom of barrel. Mining system was not an issue, compliance with rules and regulations was not an issue. PPE was an issue.
An unplanned roof fall occurred on 6/28/2025 at 3-17xc. The fall was 10'-15' wide 20'long, and height was undetermined. The fall was flagged off on the out by side and will be cleaned up.
Employee was greasing head gate sprocket when rib roll pushed EE into side of headgate causing EE to cut EE's hand. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was walking from the face and twisted knee. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 6/26/2025 at 3-19 xc. The fall was 10' wide by 10' high and 40' long. Both sides of the fall were flagged off and fall will be cleaned up.
Employee was hanging up water line when a piece of slate fell from roof and hit EE's wrist. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 6/24/25 at 3-18 xc on the track. The fall was 20'-25' long by 16'wide and 10'-15' high. Both sides of the fall were flagged off and fall will be cleaned up.
Employee was helping carry a z drill when EE fell backwards and injured EE's shoulder. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was walking back from faces when a piece of slate fell from top and hit the top of their hand. Mining system was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was climbing across a parked supply car when EE pulled something in EE's right shoulder. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was operating a locomotive when EE hit EE's head on a cable bolt. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. EMPLOYEE DID NOT START MISSING TIME UNTIL JULY 15th.
An unplanned roof fall occurred on 6/10/2025 at 14-22 crosscut track to belt. The fall was 20' long by 16' wide 8-10' high. 14-22 was flagged off on the track side and will be cleaned up.
Employee was setting a jack when they swung sled hammer to tighten, they pinched a finger between the handle and the jack. Mining system was not an issue, compliance with rules and regulations was not an issue. PPE was an issue.
Employee moving air drill to bolt when EE felt pop in EE's lower back. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was dragging dust hose on belt line when it snagged, EE slipped and fell injuring EE's shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was center bolting when EE's bolt wrench broke and hit EE on EE's forearm. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was installing cable bolt when EE lifted bolt into the hole EE felt pop in shoulder. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee reports that they were packing monorail on the belt line in 6N3 39 1/2 X-Cut. The monorail EE was carrying hit the belt; they grabbed it and went to reposition it on their shoulder. When it hit the existing monorail, it left the piece EE was holding hanging and shoved it down onto their shoulder. Employee then felt a pop in mid-back and sharp pain.
Employee was loading roof straps onto the miner when EE felt pain in EE's lower back. PPE was not an issue, mining system was not an issue, compliance with rules and regulations was not an issue.
Employee was bolting off the miner when slate rock hit tube then hit EE, when EE fell, EE cut EE's finger on rib strap trying to catch self. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was bolting off miner when piece of rock came out of rib EE tried to guide it away with drill steel, it pushed EE causing EE to lose EE's footing. EE fell injuring EE's back. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was running shearer when a rock came off the drum and hit them on the head. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was bolting off the miner when they leaned down and was struck by a piece of slate rock on the back of the head. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was installing bottom roller when EE felt sharp pain in EE's lower back. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor. Body positioning was a factor.
Employee was walking along a belt line when EE tripped and fell injuring EE's arm. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor. EMPLOYEE DID NOT START MISSING TIME UNTIL 5/15/25.
Employee was installing a piece of sheet metal inside a feeder when EE pinched EE's left middle and ring finger between the sheet and frame of the feeder. The employee was wearing gloves at the time of injury. The injury resulted in a fracture to both fingers.
Employee was working along the belt line when they went to pick up a 3/4" hose line, they felt pop in their abdomen. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was carrying water prop when EE bumped into another prop it fell and cut EE's face. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was changing out old bretby when EE strained EE's back. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was unloading belt structure from a sled when they injured their thumb. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was driving mantrip when it came off track injuring their back and ankle. PPE was not a factor mining system was not a factor.
Employee was riding in mantrip when it came off track, they hit their head and hurt tailbone. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
Employee was reaching for bolt off the side of the miner when they felt pop in back and shoulder. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor, body positioning was a factor.
Employee was attempting to put auger steel into chuck when EE slipped and injured EE's hand on the auger steels. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.
While operating a scoop, the employee went through a curtain, tearing it down along the way. EE returned to re-hang the curtain that was torn down. Employee stepped up the ladder to finish hanging the curtain, mis stepped and fell backwards to the ground. As employee landed on the ground, EE snapped EE's neck and began to feel pain down EE's spine and right leg.
Employee was miner bolting when a piece of slate fell and hit EE on top of EE's head. PPE was not a factor, mining system was not a factor, compliance with rules and regulations was not a factor.