Buscar en el registro

Left thumb hit by hammer & pipe

Utility knife slipped; lacerating right thigh

Equipment used to pull belt together slipped; resulting in an employee fall

EE smashed left ring finger.

Doing routine maintenance, wrench slipped & caused laceration to top of hand.

Piece of metal came off ripper tooth & punctured right thigh

Cleaning out cone and pinched finger between bar and angle iron. Lacerations to fingers.

Cutting tape when hand slipped. Laceration to finger.

Laceration to pinky finger while cutting belting.

Removing oil drain plug with wrench. Heard pop in elbow. Didn't learn employee would need surgery until later. Surgery occurred 08/10/2016.

Employee and coworker attempting to pry lock ring out of cone to replace liner. Employee got finger caught in between cone and lock ring.

Worker was using a utility knife to cut packaging on a cord drive over. Was pulling knife toward himself instead of pushing away. Cut right leg, mid thigh about 1/2in long. Received 2 stitches.

Pry bar contacted right forearm of employee.

While using a pry bar on unit 14-731, the bar slipped and hit the IW in lip. Injury resulted in stitches.

Employee cut thumb with a utility knife while cutting a piece of belting, the laceration resulted in sutures.

Employee was cutting a piece of rubber with a box cutter and cut his left index finger, cut resulted in employee getting stitches.

Hammer fell on EE's head (EE was wearing a hard hat and safety glasses), needed 8 staples on top of his head. Bridge of nose and eyebrow were cut. EE works on crew that works 8 days on 6 days off.

EE was using a sledge to break loose a dozer tooth. The tooth spintered and the fragment went into the fleshy part of his calf,

Cutting belt, utility knife slipped, causing laceration to left thumb.

Cleaning out the HSI to adjust liners with pry bar. He pryed up with pry bar and hurt right elbow.

Pry bar hit employee in the face.

Accident happened on 8-24-08, however, he did not got to the doctor until 9-2-08. He was tightening up bolt when wrench slipped & he fell to the ground straining right shoulder muscle.

EE was prying bar & pinched left pinky finger.

Unplugging crusher with bar and struck elbow on bar.

While using pinch bar to clear mud build-up, the bar slipped and pinched thumb between the bar and framework.

He was standing on the ground, prying frozen chunks out of the box, when one chunk of frozen dirt hit him on his left ankle.

Employee tried to dislodge rock from conveyor using pry bar. The bar pinched his hand between it and the frame.

Was cutting belt on ground with knife and was cutting toward him. The knife slipped and cut his knee.

He was cutting screen bar rail rubber and accidently cut his left forearm.

Rocks plugged the chute on the spokan, stuck bar in it & the bar came back at the employee & hit his hard hat & top of head. It broke the hard hat & cut the top of his head.

Barring material, bar slipped and struck his mouth knocking out one tooth and chipping another.

EMPLOYEE WAS 5 FT AWAY FROM LIFT AREA WHEN LIFTING EYE ON CONE WEAR LINER BROKE FREE & CHAIN USED TO LIFT WITH STRUCK THE EMPLOYEE KNOCKING OFF HIS HARD HAT & CAUSING A LACERATION ON THE SIDE OF HIS HEAD & SKULL FRACTURE.

EE WAS REBOLTING BELLY PAN ON DOZER. THE PAN WAS SECURED WITH A COME ALONG. EE MOVED PAN TO ALIGN BOLTS AND PAN SLIPPED AND FELL ON FINGER.

SKID STEER OPERATOR TIGHTENED THE CHAIN AND PINCHED EES HEAD BETWEEN THE WRENCH AND CHAIN. EE WERE TIGHTENING THE JAW BOLTS.

CLAIM ANT COMPLAINED OF STOMACH. PAIN. CONTINUED TO WORK THROUGH 9-4 AND WENT HOME ILL AFTER 1100 HOURS OF WORK. ON 9-5 HE HAD AN APPENDEX TO MY FURTHER DISCOVERED THAT HE HAD A HERNIA ALSO. S CHEDULED FOR SURGERY AGAIN. OCCURED WHILE ADJUSTING CRUSHER JAWS.

EE WAS TIGHTENING THE TENSION ON A SPEED REDUCER. WHILE APPLYING TORQUE TO A BOLT HE STRESSED HIS BACK. EE HAS A BAD BACK HISTORY.

EMPLOYEE WAS TRYING TO MOVE A ROCK THAT WAS WEDGED. ANOTHER BOCK ALONG SIDE MOVED AD HIT HIS BAR AND SMAHSED HIS HAND.

EMPLOYEE USING A SLUDGE HAMMER AND TRYING TO STRAIGHTEN A BENT FLASHING BAR. LOST CONTROL OF HAMMER AND SMASHED HIS HAND.

UNPLUGGING SPOKANED CRUSHER--CRUSHER HOPPER FELL AND STRUCK EE CAUSING HIM TO FALL.

CREW WAS USING A HAMMER WRENCH TO LOOSEN BOLTS ON JAW CRUSHER-THIS EMPLOYEE REACHED UP TO READJUST THE WRENCH AND GOT HIS HAND HIT BY THE EMPLOYEE DOING THE HAMMERING.

INJURED WAS REPAIRING A ROCK BREAKER AND HAD STOREDUSED & NEW PARTS NEXT TO THE IMMEDIATE WORK ZONE. WHILE USING A PRY BAR IT SLIPPED CAUSING HIM TO FALL & STUMBLE OVER THE STORED PARTS.

EMPLOYEE WAS TRYING TO FREE A WEDGED ROCK AT THE BOTTOM OF THE TRAP BY POUNDING IT OUT WITH SLEDGE HAMMER.

WHITE HAMMERING A SHAFT INTO A CONVEYOR THE EE PULLED SOME MUSCLES IN HIS RIGHT ARM.

EE WAS PRYING ON A ROCK IN THE JAW CRUSHER TO FREE IT. THE BAR SLIPPED OFF OF THE ROCK CAUSING HIM TO HIT HIS ARM ON THE FRAME OF THE JAW.

EMPLOYEE WAS FREERING A ROCK WEDGED IN A CHUT E WITH A HAMMER ROCK DISLODGED & FELL & STRUCK EMPLOYEES HAND

LIFTING TREE STUMPER FROM ROCK BRUSHER USING A KEG CHAIN CAUSED DISCOMFORT IN LOWER BACK AND RIGHT LEG.

EE WAS HOLDING A ROPE TIED TO THE HAMMER WRENCH WHEN THE EE SWINGING THE HAMMER SLIPPED, MISSING THE WRENCH AND STRIKING THE EE IN THE RIGHT SHOULDER.

EMPLOYEE WAS USING A PRY BAR DURING REPAIR AND MAINTENENCE OF A CRUSHER FEEDER. BAR SLIPPED AND HIT HIS CHEEK.

EMPLOYEE WAS INSIDE A CONE CRUSHER USING A TORCH TO CUT OUT THE MAGNESIUM LINER. WHILE CHIPPING AWAY SLAG, THE HAMMER HIT HIM IN THE MOUTH AND CHIPPED A TOOTH.

WHILE CLEANING OUT THE CONE CRUSHER WITH A BAR, THE EMPLOYEE STRAINED HIS (L) SHOULDER.