Buscar en el registro

IE was cutting band on pallet of bags with razor blade box cutter when it cut through and cut left thigh.

IW was holding a short section of belt conveyor flat while coworker was using a 3/8"x12" drift punch to straighten the edges of belt splice. When prying the punch slipped out of hand and flew upward hitting IW on the inner corner of right eye causing bruising, swelling and bloodshot. Prescribed eye drops to clear bloodshot and soothe eye. The drops are also antibiotic.

Railcar # NS 152963 had uneven surface on discharge chute. Employee hit the uneven area with a sledge hammer. The hammer glanced off and hit employee on top of right safety shoe. This resulted in swelling and pain when standing or walking.

Employee was using a custom made punch bar to clean built-up material off the impact wall of a conveyor transfer chute. When the bar unexpectedly broke thru the build-up, his left hand came in contact with the corner of the chute plate. This resulted in a cut, requiring 3 stitches and soreness in the area.

Employee was cleaning build-up from pulley on conveyer tripper. The bar he was using slipped causing employee to lose balance and his face hit frame of tripper.

INJURED EMPLOYEE WAS UNLOADING ORE RAILCARS BY HITTING RAILCAR WITH SLEDGE HAMMER PULLING MUSCLE IN RIGHT ARM. BECAME REPORTABLE BECAUSE OF SURGERY 7/23/02.

EE WAS HITTING RAILCAR WITH SLEDGE HAMMER TO GET THE BORATE ORE TO START FLOWING. DOCTOR DIAGNOSED LATERAL EPICONDYLITIS ON 1/10/02, GIVING HIM CELEBREX 200 TO ALLEVIATE THE PAIN. ON 2/18/02 THE DOCTOR INJECTED HIM WITH XYLOCAIN AND DEPOMEDROL.

EE WAS UNLOADING ORE FROM RAILROAD CAR BY HITTING SIDE OF RAILCAR WITH SLEDGE HAMMER CAUSING TENDERNESS IN RIGHT ARM. EE WENT TO THE DOCTOR ON 8/7/01, BUT THE INJURY DID NOT BECOME REPORTABLE UNTIL HE WENT TO PHYSICAL THERAPY ON 9/20/01.

IE WAS CHANING THE RETURN ROLLERS ON THE CONVEYOR USING A HAMMER TO SEAT THE ROLLERS OUT OF THE BRACKETS. WHILE BEATING THE ROLLER EE STRAINED A MUSCLE IN HIS RIGHT ARM. THE PAIN WENT AWAY AND HE DID NOT GO TO THE DR UNTIL 9-18-01, BUT THE REPORT DID NOT BECOME REPORTABLE UNTIL HE WENT TO PHYSICAL THERAPY 9-25-01.

INJURED EE WAS SWINGING A 12 LBS HAMMER HITTING RAIL CAR WHEN HE FELT HIS RIGHT SIDE PULL CAUSING A 2% STRAIN IN HIS ABDOMEN. THIS REQUIRED LIGHT DUTY.

INJURED EE WAS CUTTING SKIRTS FOR CONVEYOR WHEN BOX KNIFE SLIPPED CUTTING LEFT PALM REQUIRING 5 STITCHES.

INJURED EE WAS CLSING DOOR ON RAILCAR, MASHED RIGHT THUMB BETWEEN RAILCAR AND BAR THAT WAS BEING USED TO CLOSE DOOR, CAUSING LACERATION. REQUIRED STAPLES.

IN PROCESS OF UNLOADING ORE CAR.WAS HITTING ON SIDE OF CAR WITH SLEDGE HAMMER WHEN HAND CAME IN CONTACT WITH SHARP RIDGE ON CAR. RIGHT HAND LACERATION.

EMPLOYEE WAS PUNCHING MATERIAL OUT OF CONE CRUSHER. BAR KICKED BACK AND STRUCK HIM IN HEAD CAUSING SCALP LACERATION AND REQUIRED STITCHES.

PUNCH CHUTE WITH BAR #3, SHED BELT TO #3 MILL BAR KICKED BACK CURSHING RIGHT HAND BETWEEN CHUTE AND BAR. LACERATION AND AVULSION TO RIGHT FINGERS.

BEATING ON RAIL CAR WITH SLEDGE HAMMER CAUSING LEFT BICEP STRAIN.

EE WAS UNLOADING RAILCARS BY BEATING ON THE RAILCAR WITH A SLEDGE HAMMER. HE FELT HIS RIGHT WRIST POP AND NOW HAS PAIN WHEN TRYING TO USE HIS WRIST.

EE WAS CLOSING A RAILROAD CAR DOOR WITH A BAR AND HURT HIS BACK.

WORKING AT ROCK CRUSHER UNLOADING CRUSHING ORE FORM RAIL CAR.

EMPL WAS CLEANING ORE CHUTE WITH STEEL FLAT BAR.

EMPLOYEE WAS CLEANING ORE TRANSFET CHUTE WITH STEEL FLAT BAR AND CAUGHT FINGER BETWEEN FLAT BAR AND EDGE OF CHUTE

EMPL. WAS USING BAR TO CLEAN OUT ELEVATOR ON MILL. BAR SLIPPED OUT OF HIS HANDS & CAUGHT FINGER BETWEEN CHUTE & BAR.

EMP WAS WORKING3WITH PRY BAR TO LOOSEN MATERIAL

EMPLOYEE WAS USING A HAMMER TO FIVE A PIECE OF STEEL. WHEN THE HAMMER STRUCK THE STEEL A PIECE OF STEEL BROKE OFF AND PENETRATED ARM. HAMMER HAD BEGUN TO SPALL.

EMPL TRIED TO DISLODGE COME-A-LONG WITH DIRT CLOD.DIRT CLOD GLANCED OFF COME-A LONG AND HIT EMPL ON ANKLE.