Buscar en el registro

SHOVELING AT TAILPULLEY OF SP6 AND THROWING WET MATERIAL ONTO BELT. THE WET MATERIAL SPALSHED ON BELT AND GOT INTO RIGHT EYE.

WORKING IN MILL. REPAIRING CRUSHER. WHILE USING A HAMMER, SWUNG HAMMER NAD HIT THUMB OF LEFT HAND.

WORKING AT SURGE COMPLEX. CUTTING RUBBER FOR SPRING BAR. WHILE USING KNIFE TO CUT RUBBER, KNIFE SLIPPED AND CUT PALM OF RIGHT HAND.

EE WAS USING A UTILITY KNIFE TO CUT A HOLE IN BELTING THAT WAS TO BE USED AS A CURTAIN ON SCREEN #7. AS HE WAS CUTTING THE UTILITY KNIFE SLIPPED AND HE CUT HIMSELF ABOVE THE RIGHT KNEE.

WHILE HEATING COLLAR STARTED HAMMERING ON THE ROCK PIECE OF COLLAR BROKE OFF & WENT INTO LEFT FOREARM

WHILE BOLTING DOWN A WIRE PLATE HIT SCREW DRILLER WHEN THE SCREW DRIVER CAME DOWN LEFT 5TH FINGER CAUGHT BETWEEN SCREWDRIVER & PLATE

SKINNGING ELECTRICAL WIRE, WITH POCKET KNIFE. KNIFE SLIPPED CUTTING HAND.

MINER WAS ASSIGNED TO WORK CREW PERFORMING SEASONAL REPAIR TO AN ALLIS CHALMER 42 INCH GYRATING CRUSHER. HE WAS WORKING INSIDE THE THROAT WHERE DIAPHRAM WEAR PLATES HAD BEEN REMOVED EARLIER. H E WAS CHISELING AWAY THE FAST BACK PRODUCT THAT WAS USED TO HOLD THE DIAPHAM PLATES IN PLACE. AT THE TIME HE WAS WEARING HIS PERSONAL EYEGLASS PROTECTION WHILE CHISELING A PIECE OF FAST BACK

MINER WAS INSTALLING A NEW SET OF BUCKET TEETH ON A CAT 992 FRONT END LOADER. WHILE DRIVING A TOOTH SECURING IT TO THE BASE, MINER ACCIDENTLY STRUCK ADJACENT BUCKET TOOTH CAUSING BALL PEEN HAM MER TO MISS TOOTH PIN, THEREBY STRIKING HIS RIGHT THUMB.

CHANGING TEETH ON A 992 CAT LOADER BUCKET,MINER DRIVING A NEW PIN IN TOOTH OF BUCKET WITH A SLEDGE HAMMER. PIECE OF METAL CHIPPED OFF AND HIT EMPL BELOW LEFT EYE.

MAKING REPAIRS TO PRIMARY DRILL.USING A HAMMER TO INSTALL ROLL PIN INTO SHAFT,HIT PINKY OF LEFT HAND.

STONE JAMMED IN 7' CRUSHER & EMPL WAS HELPING TO DIG OUT STONE. HE FELT PULL IN BACK A HE WAS DIGGING OUT STONE TO FREE CRUSHER JAM.

HAMMERING AN INNER RACE SHAFT AND A SPLINTER OF STEEL (SIZE OF A FINGER NAIL CLIPPING) CAME OFF AND LODGED IN LEFT FOREARM

WHILE WORKING ON #3 CONVEYOR BELT (RECRUSH PLANT) HE WAS RELEASING RATCHET CABLE PULLER WHEN HIS HANDS SLIPPED OFF, CAUSING THE HANDLE TO HIT HIM IN THE CHIN.

TAPPING BRAKES CAM SHAFT WITH HAMMER AND SILVER OF STEEL LODGED IN LEFT THUMB.

HE WAS HOLDING A LENGTH OF SKIRT BOARD RUBBER AND CUTTING IT WITH A KNIFE. USING KNIFE IN LEFT HAND TO MAKE CUT, IT SLIPPED AND HE RECEIVED A CUT TO HIS LEFT THIGH.

LOWERING A PIECE OF METAL PLATE ON A ROPE DURING WINTER REPAIR SEASON AT PRIMARY CRUSHER (NOT OPERATING) METAL PLATE SWUNG AND STRUCK LEFT FOOT OF EMPLOYEE

EMPL DISLODGING ROCK,STRAINED LOWER BACK.

USIN G BAR TO TIGHTEN BOLT HAND SLIPPED OFF BAR CAUSING HIM TO LOSE HIS BALANCE AND FALL 14' TO LOWER LEVEL FLOOR HEAD WAS ON FLATHEAD TRAILER AT TIME

WHILE USING A PUTTY KNIFE TO CLEAN A SEALING RING, PUTTY KNIFE SLIPPED AND STRUCK LEFT INDEX FINGER. WOUND REQUIRED SUTURING.

EMPLOYEE STATES WHILE HOLDING BAR OF STEEL, SWINGING HAMMER, MISSED AND BRUISED THUMB.

EMPLOYEE WAS WORKING ON SPLICE IN CONVEYOR BELT. A COME-A-LONG WAS BEING USED. HE WAS PULLING ON HANDLE SNAPPED BACK HITTING HIM IN THE SHIN OF LEFT LEG.

WHILE PUTTING PACKING INTO SLURRY PUMP HE WAS USING A BAR TO WEDGE PACKING COVER INTO PLACE. BAR SLIPPED OFF AND HIS FOURTH FINGER ON RIGHT HAND BECAME WEDGED BETWEEN BAR AND ELECTRICAL BOX.

CHECKING FLUID LEVELS OF TRUCK #2154. HE SLIPPED OFF TRUCK PLATFORM AND FELL TO THE FLOOR LANDING ON HIS BACK. THAT NIGHT WHEN HE RETURNED TO WORK HE FELT HIS BACK GOT OUT WHILE PULLING ON WRE NCH WITH A PIPE EXTENSION ON IT. EXTENSION SLIPPED OFF AND HE FELT HIS BACK GO OUT.

WT ON R. KNEE AS HE WAS TIGHTENING BOLTS WITH WRENCH.

EMPLOYEE ALLEGES THAT WHILE USING SLEDGE HAMMER TO REMOVE BOLTS OUT OF PLATE HE MISSED THE PUNCH AND HIT HIS RIGHT INDEX FINGER.

EMPLOYEE ALLEGES THAT WHILKE HAMMERING FEED TUBE INTO CRUSHER HE MISSED CAUSING HIS FIRST FINGER LEFT AHND TO GET PINCHED BETWEEN PIECE OF METAL AND HANDLE OF THE SLEDGE HAMMER CAUSING A LACER ATION.

EMPLOYEE ALLEGES THAT WHILE CUTTING A PIECE OF RUBBER WITH A RAZOR BLADE KNIFE THE KNIFE SLIPPED CAUSING A LACERATION TO HIS THIGH.

REOCCURRENCE OF3INJURY SUSTAINED 5-8-87. WHILE EMPLOYEE WAS ROLLING LONG STEEL PIPE WITH A PRY BAR. HE FELT A SHARP PAIN IN HIS BACK WHILE LIFTING UP ON PRY BAR.

EMPLOYEES WERE 1UTTING RUBBRE SKIRTING ON D-1 CONVEYOR I.NAME WAS HOLDING RUBBERHOOK WHILE ANOTHER EMPLOYEE CUT RUBBER WITH UTILITY KNIFE KNIFE SLIPPED CUTTING EMPLOYEE ON LEFT FINGER

EMPL MOVING SCR9EN FRAME WITH COME-ALONG.SCREEN FRAME STUCK AND THEN JUMPED PINCHING FINGER BETWEEN FRAME AND WOOD BLOCKING.

WHILE EMPLOYEE 4AS ROLLING 10 INCH DIA X 54 FT LONG STEEL PIPE WITH A 4 FT PRY BAR HE FELT A SHARP PAIN IN HIS BACK WHILE LIFTING UP ON PRY BAR.

WORKING SP-6 TU3NEL. HITTING WEDGE WITH SLEDGE HAMMER IN #3 CHUTE, STRUCK FINGER BETWEEN SLEDGE HAMMER HANDLE & ANGLE IRON SUPPORT

EMPLOYEE WAS PR2ING AN IDLER BRACKET OFF CONVEYOR FRAME ALL AT ONCE THE BRACKET CAME LOOSE CAUSING EMPLOYEE TO BEND ELBOW RT ARM IN OPPOSITE DIRECTION THAT AN ELBOW USUSALLY BENDS THIS CAUSED HIS ARM TO HUR7 IN THAT AREA

EMPLOYEE WAS MA5ING BOLTS AT THE BLACKSMITHS SHI SHOP FOR BULLRING FOR PRIMARY CRUSHER ANVIL SLIPPED ON WHICH BOLT WAS RESTING STRIKING EMPLOYEE ON LEFT MIDDLE FINGER