Buscar en el registro

Employee was using a 3-lb hammer to hit a wrench in order to loosen a nut on a threaded rod on the motor mount of the slurry pump. The hammer deflected off a guard onto the back of left hand, resulting in injury. X-ray diagnostics showed a fractured bone.

Employee was using a blade to cut and remove electrical tape from a cord. As EE removed glove to peel back the tape EE made one final cut on the tape and accidently cut thumb.

THE EMPLOYEE WAS REMOVING A WORN TRACK ROLLER ON A CAT D6 DOZER. AFTER DONNING PPE AND REMOVING THE BUSHING BOLTS, EE PLACED THE COLD CHISEL INTO THE LOOSENING SLOT AND STRUCK THE CHISEL WITH THE HAMMER. THE CHISEL SHOT BACK INTO EE'S FACE SHIELD AND LACERATED EE'S LOWER LEFT LIP.

Employee was assisting in maintenance activities within the shop to loosen a housing on a water pump. The employees finger was struck by the hammer being used causing laceration and fracture to the left ring finger.

Cutting scrap steel in yard, employee stepped on a piece of protruding steel from a cable and suffered minor puncture wound to foot. Tetnaus shot given and prescription to avoid infection.

Attempting to remove the track pin from the linkbelt backhoe (company # 9127) the employee hit the pin with a sledge. A piece of metal broke loose and struck his left thigh, causing a puncture. Metal was removed and prescription given.

Attempting to change out 2'x1' drettant screen on was plant, employee needed to dislodge screen with swinging 16 lbx sledge, employee missed objective/target and hand hit corner of z cross bratice. as a result, he suffered a laceration and broken pinky finger.

EE WAS ATTEMPTING TO LOOSEN A NUT ON THE MICHIGAN LOADER 270. THE RATCHET BROKE & EE LOST BALANCE, SLIPPING & ROLLING ANKLE. MEDICAL ATTENTION GIVEN (X-RAY & PRESCRIPTION MEDS). NO LOST TIME.

EE WAS USING A HAMMER TO UNPLUG A MATERIAL CHUTE. EE MISSED HIS MARK. THE HAMMER HANDLE STRUCK THE EDGE OF THE CHUTE, HIS RT. INDEX FINGER WAS STRUCK BETWEEN THE EDGE OF THE CHUTE AND THE HAMM ER HANDLE.

EMPLOYEE WAS REMOVING THE HOUSING OF AN AIR FILTER, WHEN HIS RATCHET SLIPPED OFF A NUT. EMPLOYEERECEIVED A CUT ON HIS RIGHT HAND (BACK OF HAND)

EMPLOYEE WAWS USING A PRY BAR TO LINE UP BOLT HOLES ON A CUTTING EDGE. EMPLOYEE REMOVED ONE HANDFROM THE BAR TO INSERT A BOLT, THE BAR SLIPPED AND HIT HIS UPPER LT SIDE LIP.

EMPLOYEE WAS WELDING ON A STEEL PALTE, HAD HIS HEAD TURNED(RT. SIDE) TO HIS WORK. HIS RT. EAR WAS IN CLOSE PROXIMITY TO THE PLATE. A CO-WORKER HIT THE PLATE WITH A HAMMER. EMPLOYEE WAS SUBJECT ED TO A PERCUSSION AIR BLAST. EMPLOYEE WENT TO OWN DR. 2-28-98 AND RECEIVED A HEARING TEST 3-19-98 TOLD NO HEARING LOSS.

EE WAS DRIVING ON A STEEL PIN W/HAMMER, A PIECE OF METAL FLAKE WENT INTO HIS LT EYE. EE WAS WEARING SAFETY GLASSES W/SIDE SHIELD.

EMPLOYEE WAS UNDER SHAKER SCREEN DECK-TIGHTING THE DECK SCREEN BOLTS.-RUST FELL INTO HIS RT. EYE.

TUSING 2 WRENCHES ONE SLIPPED OTHER SWUNG AND PINCHED CUT FINGERTIPS MIDDLE FINGER ON R HAND

WHILE BREAKING FRONT WUMPS WITH A STEEL BAR HE GOT HIS LITTLE FINGER BETWEEN THE BAR AND SUPPORT BRACE.

EMPLOYEE WAS INSTALLING WHEEL HUB ONTO SPINDLE SHAFT. IT WAS SUSPENDED BY A NYLON SLING WHICH SLIPPED OFF STRIKING EMPLOYEE.

HE WAS REMOVING OLD HOPPERCHUTE ASSEMBLY AT WASH PLANT. HE HAD SECURED CHUTE WITH 2 COMEALONGS & CUT IT FREE. HE WAS LOWERING CHUTE WHEN ONE COMEALONG SLIPPED FREE CAUSING LOAD TO SHIFT & HIT FOOT.

MAN WAS DRIVING3OUT A BOLT IN A ROLLER IN ORDER TO CHANGE THE ROLLER. HE MISSED THE BOLT AND STRUCK HIS THUMB WITH THE HAMMER.

WHILE REMOVING 6AD BEARING FROM A HOUSING ON A SHAKER HEAD USING A HAMMER AND PUNCH. A PIECE OF STEEL BROKE OFF THE ROLLER BALL STRICKING MAN IN STOMACH, PENTRATING THE SKIN IN STOMACH AREA.

WHILE CHISELING3BACKING MATERIAL OUT OF CRUSHER LINER, HE MISSED THE CHISEL AND STRUCK HIS HAND WITH THE HAMMER.