Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was cutting a dredge sleeve loose and the sleeve hit leg causing swelling and bruising.
Employee was cutting a piece of rubber hose and his razor blade slipped and cut his left leg above the knee
Supervisor was driving a pin in the track of the Hyundai Trackhoe with a 10lb hammer. A piece of the pin broke off and went into injury's left leg. He had to have 7 stiches.
Employee was unclogging a drain pipe with a stick and his right hand slipped and hit the drain pipe. His hand was scraped and swollen.
Employee was attempting to hit a bolt with a hammer and mashed his finger.
Employee was tightening an impeller on a gravel pump with a pipe wrench. The wrench slipped and cut a gash on his forehead above his right eye.
While striking a cable cutter with a 12 lb hammer, a foreign object flew into employee's right eye. He was not wearing his safety goggles.
EE WAS TIGHTENING COME-A-LONG TO PULL BACKHOE TRACK. THE COME-A-LONG TURNED LOOSE AND EE FELL BACKWARDS AND SAT DOWN ON GROUND HARD, INJURED BEHIND AND LOWER BACK
EE WAS PUTTING A CLEAN OUT PLUG BACK ON. THE COMEALONG SLIPPED & CAUGHT HIS FINGER. HIS RIGHT RING FINGER WAS FRACTURED AT THE TIP & CUT ON THE TIP BY HIS FINGERNAIL
EE WAS STANDING BETWEEN 2 SHAFTS IN LOG WASHER RECONNECTING LOG AFTER REPLACING A BROKEN PART. COME-A-LONGS WERE POSITIONED SO THAT THEY NOT ONLY PULLED LOG, BUT ALSO PICKED IT UP - CAUSED LOG TO SWING AND PIN EE'S RIGHT LEG BETWEEN THE LOGS.
EMPLOYEE WAS CUTTING A 1" RUBBER HOSE WITH A RAZOR KNIFE. THE KNIFE SLIPPED OFF THE HOSE AND CUT HIS LOWER RIGHT WRIST REQUIRING FOUR STITCHES.
HE WAS REMOVING A HOSE BAND ON A 3" RUBBER HOSE. THE HOSE HAD FACTORY INSTALLED FASTENERS THAT HAVE TO BE REMOVED BY SAWING OFF. HE WAS SAWING THROUGH THE HOSEBAND WITH A HACKSAW. WHEN HE CUT THROUGH, THE FASTENER POPPED BACK AND CUT HIS LEFT INDEX FINGER.
EMPLOYEE WAS USING A 12 LB SLEDGE HAMMER TO DRIVE OUT A TRACK PIN IN THE MASTER LINKS ON THE TRACKS OF A KOMATSU PC HYDRAULIC EXCAVATOR. WHILE SWINGING THE HAMMER, HE FELT EXCRUCIATING PAIN IN HIS RIGHT STOMACH.
EE WAS PUNCHING HOLES IN CONVEYOR BELT USING A PUNCH & CLAW HAMMER. THE HAMMER GLANCED OFF THE PUNCH & HIT HIS LEFT INDEX FINGER AT THE BASE KNUCKLE.
EE WAS USING A WRENCH TO REMOVE DRILL PIPE FROM THE GROUND. THE WRENCH SLIPPED OFF THE PIPE & CAUGHT THE RING FINGER ON HIS RIGHT HAND BETWEEN THE PIPE AND THE RAIL OF THE DRILL RIG.
EE WAS HELPING CHANGE A VIBRATOR SCREEN. HE WAS HAMMERING A BOLT; HE MISSED AND HIT HIS LEFT INDEX FINGER WITH HAMMER. NO BONE BROKEN. NOTE: EE DID NOT REPORT INJURY UNTIL 2/8/99.
EE & ANOTHER EE WERE USING A PRY BAR TO TURN THE SHAFT IN THE CUTTER BOX ON DREDGE. THE SHAFT HUNG UP. EE STRAINED HIS MIDDLE, LOWER, LEFT BACK.
EMPLOYEE WAS TIGHTENING BOLTS AND A COUPLING ON DREDGE USING A WRENCH. THE WRENCH SLIPPED AND CUT HIS THUMB. NO STITCHES WERE REQUIRED- NO BONES BROKEN-SPLINT AND BANDAGE.
EMPLOYEE WAS WATCHING ANOTHER MAN CHIPPING WELD OFF A PIPE. HE LOOKED OFF, TURNED AROUND AND LOOKED BACK AND A PIECE OF SLAG FLEW INTO HIS LEFT EYE.
EMPL SITTING ERECT WITH FEET AND LEGS STRAIGHT IN FRONT OF BODY USING COME-ALONS TO MAINTAIN POSITIVE TENSION.TRYING TO CORRECT THE LOCATION OF TRAVELING SPUD ON GRAVEL DREDGE.
EMPLOYEE WAS REPLACING TEETH ON CUTTER WHEEL,USING A HAMMER,WHEN A SLIVER OF METAL DISLODGED LACERATING LEFT ARM.