Buscar en el registro

Swinging 3 pound sledge hammer on mill screens, when he developed light shoulder pains.

Employee was using a pry bar to clear a rock from a chute when the pry bar slipped, pinching the 3rd finger on his right hand between the bar and the chute.

Driving wooden wedge with 3 pound sledge hammer, hammer glanced off wooden wedge striking left ring finger.

Removing hydraulic pump from Cat 988G, wrench slipped and severed tip of right thumb.

Employee was cutting a conveyor belt when the knife slipped, cutting the back of his left hand. Employee was wearing gloves.

While cutting side rubber knife slipped and cut right hand.

Employee was cutting a piece of rubber during repairs to the #102 screen when the utility knife slipped and cut his left thumb.

WHILE INSTALLING A PULLEY FOR A BELT IDLER, THE WRENCH SLIPPED CAUSING THE EMPLOYEE TO HAVE HIS FINGER CAUGHT BETWEEN THE BELT AND THE IDLER PULLEY.

WHILE TRYING TO LOOSEN A STONE IN CRUSHER THE DIGGING IRON SLIPPED. THE ROCK CAME LOOSE CATCHING EMPLOYEE'S LEFT INDEX FINGER BETWEEN ANGLE IRON GUARD AND DIGGING IRON.

ROCK JAMMED IN ROCK CRUSHER. EE USING PRY BAR TO LOOSEN ROCK WHEN HIS RIGHT THUMB GOT BETWEEN ANGLE IRON GUARD & DIGGING IRON.

WHILE PRYING ROCK WITH A DIGGING IRON, ROCK CAME LOOSE AS EMPLOYEE WAS PULLING TOWARDS HIM. PINCHED LEFT THUMB BETWEEN IRON AND CORNER POST.

WHILE CUTTING A PIECE OF RUBBER, UTILITY KNIFE SLIPPED CUTTING THIGH OF RIGHT LEG.

WHILE TRYING TO BREAK A ROCK WITH SLEDGE HAMMER TO FIT IN CRUSHER, TWISTED HIS BACK.

WHILE EMPLOYEE WAS REMOVING HOOD ON LOADER AND LOWERING IT TO THE GROUND, THE HOOD HIT COUNTER WEIGHT AND STRUCK THE EMPLOYEE'S RIGHT LEG.

EE HOLDING A PUNCH FOR ANOTHER EE WHEN EE HIT PUNCH, WITH HAMMER, PUNCH SLIPPED CATCHING RIGHT THUMB

EE WAS CLEANING BY HAMMERING THE BOTTOM OF THE CHUTE. THE FINGER THAT WAS HOLDING ONTO THE HAMMER HANDLE STRUCK A WEAR-BOLT, CAUSING A CONTUSION.

EE WAS KNEELING ON CONVEYOR BELT USING A UTILITYKNIFE WHILE MAKING REPAIRS. EE WAS DRAWING KNIE TOWARDS HIMSELF, WHEN THE KNIFE SLIPPED AND CONTACTED HIS LEFT LEG.

EE WAS TRYING TO REMOVE A SHEAVE FROM CRUSHER. THE SHEAVE POPPED FREEN FROM BUSHING LANDING ON TOP OF LEFT FOOT BEHIND STEEL TOE WORK BOOT. BROKE 4 BONES ON TOP OF LEFT FOOT.

EE WAS BENDING OVER WITH SCRAPER IN HAND PREPARING TO CLEAN OUT UNDER CONVEYOR BELT AT PRIMARY CRUSHER. HE STEPPED FORWARD WITH LEFT FOOT & POULLED DIRT PILE. FELT A SHARP PAIN AROUND & BELOW HIS LEFT KNEE.

EE WAS CUTTING RUBBER SKIRTING AND CUT HIS LEFT PALM WITH UTILITY KNIFE.

EE WAS DIGGING MUDDY MATERIAL OUT OF 2A BIN, SOME MATERIAL SLID DOWN AND STRUCK EE'S LEFT KNEE.

AS EMPLOYEE WAS TRYING TO POKE FREE BUILT UP MATERIAL IN CHUTE WITH PRY BAR IN A HORIZONTAL POSITION THE MATERIAL BROKE FREE CAUSING THE PRY BAR TO FLY UP IM THE AIR CATCHING THE EMPLOYEE IN T HE RIGHT EAR LOBE.

EMPLOYEE (EE) WAS CUTTING A SCRAPER FOR OMNI FEED BELT WITH HACKSAW CUTTING BACK PIECE OF SCRAPER BLADE WITH HACKSAW SO IT WILL FIT INTO SCRAPER BLADE ARM SLIPPED OFF SCRAPER WITH HACKSAW & CU T RIGHT INDEX FINGER

EMPLOYEE WAS SITTING IN THECHUTE ON ONE KNEE WITH HIS OTHER (LEFT KNEE) HANGING OUT OF THE CHUTE HE REACHED OUT TO THE LEFT SIDE OF THE CHUTE TO TIGHTEN A BOLT THE WRENCH SLIPPED OFF THE NUT & HE LOST HIS BALANCE & FELL ON THE HAND RAIL (6FT BELOW) HIM

EMPLOYEE WAS CHANGING SHIMS ON PRIMARY CRUSHER WHILE USING TWO PORT-A-POWERS TO MOVE BASE TOGGLE SEAT JAW ETC ONE OF THE PORT-A-POWERS LOSTS ITS POWER CAUSING BASE TOGGLE SEAT TO SHIFT PINCHIN G EMPLOYEES RIGHT FOREARM

WHILE EE WAS TRIMMING WEEDS THROUGHOUT THE WINFIELD QUARRY, HE CAME IN CONTACT WITH SOME POISON IVY. APPARENTLY SOME OF THE JUICE CONTACTED HIS SKIN, CAUSING A REACTION.

EMPLOYEE WAS USING A HAMMER AND A PUNCH.HIS HAND SLIPPED OFF PUNCH AND HIT THUMB WITH HAMMER.

EMPLOYEE WAS TIGHTING DOWN PRIMARY CRUSHER WITH HYD JACK AND PINCH BAR, WHEN HIS HAND GOT PINCHED, DUE TO THE JAKC SLIPPING OFF JAW.

EMPLOYEE WAS BENDING DOWN TO UNHOOK COME-A-LONG FROMT EH RIP-RAD GATE AT THE DISCHARGE END OF THE PRIMARY SCREEN. HE COULDN'T GET IT LOOSE, SO HE BENT DOWN FARTHER AND WAS WIGGLING THE HOOLS WHEN HE FELT PAIN IN HIS LOWER BACK.

EMPLOYEE POKING BUILD UP OF STONE IN CHUTE FROM UP ON DECK THROUGH GRATING ON FLOOR. EMPLOYEE'S HAND WAS ON BOTTOM OF HANDLE HOLD OF POKER WHEN POKER WENT THROUGH ROCK EMPLOYEE STRUCK HAND ON DECK.

EMPLOYEE WAS REMOVING SHEAVE FOR CRUSHER USING 2 PORTA POWERS. THE PRESSURE CAUSED BY PORTA POWERS PUSHING SHEAVE OFF OF EL-JAY CRUSHER, TORE SHEAVE LOOSE AND IT LANDED ON EMPLOYEE'S LEFT FOOT .

WORKING ON 1 SCREEN WITH OTHER EE USING WRENCHES WRENCH SLIPPED OFF STRIKING EE ABOVE LEFT EYE.

EMPLOYEE USING AIR JACKS TO RAISE BACK OF LOADER. WAS PLACING SAFETY PIN IN JACK WHEN JACK SLIPPED, CAUSING LOADER TO DROP AND HIT EMPLOYEE ON TOP OF HEAD.

EMPLOYEE WAS LOWERING MOTOR WITH MECHANICAL LEVER HOIST.AS HE WAS LOWERING MOTOR DOWN,LEVER HOIST SLIPPED AND THREW AGAINST EDGE OF TIN,CUTTING EMPLOYEES LEFT HAND.

EMPLOYEE WAS SPLICING A PIECE OF CONVEYOR BELT. WHILE CUTTING ACROSS THE BELT TO MAKE IT SQUARE FOR SPLICING, BY PULLING UTILITY KNIFE TOWARDS HIS BODY, CONVEYOR OR KNIFE LEFT LOOSE AND PRESS URE FROM THE PULL TOOK THE KNIFE INTO EMPLOYEE'S LEG.

PRYING ROCK OUT OF FEEDER, USING PRY BAR AND PULLED MUSCLE ON SHOULDER.

WHILE REMOVING PORTION OF TREE BEING TAKEN DOWN,BRANCH SWUNG FORWARD HITTING EMPL LEFT SIDE OF CHEST.BRUISED MARKS ON CHEST.

EMPLOYEE WAS HITTING A PIECE OF STEEL WITH A HAMMER TO BEND IT WHEN A CHIP OF STEEL FLEW INTO HIS LEFT EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AT TIME OF ACCIDENT.

EMPL HAMMERING CABLE LOCK WEDGE OUT.WEDGE CAME OUT AND CABLE SPRUNG UP AND HIT EMPL IN NOSE.

EMPLOYEE WAS CLEANING OUT WET LIME MIXING SCREW. THE PIECE OF STEEL USED TO CLEAN OUT THE SCREW CAUGHT ON ONE OF THE FLIGHTS AND STRUCK THE EMPLOYEE IN THE CHIN AND RIGHT ARM.

EMPLOYEE WAS USING A SLEDGEHAMMER TO INSTALL WEDGES IN A CRUSHER WHEN THE HAMMER SLIPPED AND STRUCK HIM IN THE LEFT FOOT

EMPLOYEE WAS STRETCHING ACOSS CAB OF TRUCK, SITTING IN SEAT WITH RIGHT HAND ON RIGHT DOOR AND TWISTED TO SWEEP THE FLOOR CAUSING RIGHT SHOULDER TO DILOCATE.

EMPLOYEE WAS SHOVELING DEBRIS FROM UNDER A 4 FT HIGH CATWALK,WHEN SWING SHOVEL PINCHED HIS RIGHT AHND BETWEEN SHOVEL HANDLE AND CATWALK.STEPPED OUT FROM UNDER CATWALK EMPLOYEE STOOD UP AND STR UCK LEFT SHOULDER ON CATWALK FRAME.

WHILE LIFTING UP ON A PRY BAR TO TRY TO LOOSEN STONES THAT WERE CAUGHT IN A CHUTE EMLOYEE BENT DOWN AND STARTED TO PULL UP WHEN HE FELT PAIN IN HIS LOWER RT BACK AREA

EMPLOYEE WAS PULLING ON ROPE WITH ALUMINUM CLAMPS TIED ON. HE TUGGED BACK AND EXPERIENCED AND A PULLED MUSCLE IN BACK AREA.

EMPLOYEE WAS TIGHTENING NUTS ON SCREEN WITH OPEN END WRENCH WHEN IT SLIPPED OFF THE NUT AND SMASHED THUMB IN CHUTE LOCATED UNDER THE SCREEN.

EMPLOYE WAS TIGHTENING THE CHEAT PLATE ON THE JAW OF THE CRUSHER HE JERKED ON THE WRATCHET AND IT SLIPPED CAUSING HIM TO LOSE HIS BALANCE AND JUMP 3-4 FEET TO THE GROUND BELOW

USING A HAMMER TO LLOSEN ROCKS IN HOLES OF CATWALK PRIOR TO CLEANING SAME.ROCK CAME UP STRIKING LEFT EYE.

SLEDGE HAMMER WAS BEING USED ON LEDGE OF EL-JAY.INJURED WAS HOLDING SHAFT WHICH RECOILED PINCHING TOP OF AHND AND PULLING LIGAMENT IN RIGHT WRIST.

EMPLOYEE WAS WORKING ON SYMONS CRUSHER, USING A WRENCH TO REMOVE BOLTS AND REPLACE WITH NEW ONES.