Buscar en el registro

while loosing a bolt the bolt broke loose and teammate fell forward and stated EE felt pain in EE's left hip. teammate was seen and released to full duty and was seen again on 112625 due to more complaints of the affected area. released with a steroid shot. to full duty no restrictions

while hitting a shaft with a hammer a piece of metal chipped off and became lodged in the right forearm.

While cutting off the mill belts, the knife slipped off the belts and hit EE's left forearm.

While trying to break loose a bolt using a boxed end wrench the bolt broke loose quickly and the teammate felt a pop in right shoulder

While working on the screen the teammate placed the chain hoist improperly on the I-Beam and the hoist fell from the I-Beam and struck the teammate's thumb.

EE was using the kiln wrench along with a sledgehammer to pop the chain loose. The wrench slipped off the chain and EE smashed hand between the hammer and the outer shell of the door.

EE was changing screens on the extruder. While tightening the bolt on the pusher blade, the socket wrench either slipped or failed. EE's arm came in contact with the top of the extruder screen and was cut.

Employee was installing bolts on a mill casing when the socket slipped off the bolt and right elbow struck the bracket causing a laceration to the elbow.

Miner was removing fitting off conduit (pipe), using two pairs of Channel Locks, using force to remove the coupling from the conduit and felt a pop in his left hand/wrist.

3/17/09 Operator reported that he woke that morning with chest pain and believes it was contributed to the previous days work function of washing out pumps using a pry bar in an upaward pulling strain motion.

OPERATOR DAMAGED A NERVE IN HIS NECK USING A PICK AXE TO BREAK UP A PIECE OF CLAY. LOST TIME BEGAN OCT. 7, 2004 FOR SURGERY TO REPAIR NERVE DAMAGE.

PRY BAR STRUCK AGAINST SHOULDER WHILE OPERATOR WAS TRYING TO DISLODGE CLAY FROM A CRUSHER. BRUISED SHOULDER.

OPERATOR STRAINED RIB AREA ON RIGHT SIDE TRYING TO DISLODGE CLAY FROM A CONVEYOR BELT.

OPERATOR STRAINED ROTATOR CUP IN HIS LEFT ARM WHILE CLEANING UP IN THE MILL BLDG.

EE WAS USING A PUNCH ROD TO UNSEAL THE PRIMARY CRUSHER. A CLOD ROLLED OVER ON HIS HAND CATCHINGIT BETWEEN THE CLOD AND CRUSHER.

INJURED LOWER BACK WHILE SCOOPING CLAY.

OPERATOR WAS ATTEMPTING TO REMOVE THE LOBE FROM A SIFTER DRUMS. OPERATOR WAS USING HAMMER AND PIECE OF CONDUIT PIPE AS TOOLS. AS HAMMER S TRUCK AGAINST PIPE, IT GLANCED OFF, HITTING BACK OF OP ERATOR'S HAND.

CONTRACTOR WAS USING CHAIN HOIST TO LIFT MOTOR TO ROTEX LEVEL OF MILL BLVD.CHAIN HOIST WAS ON A RAIL WITH OUT A STOP. HOIST RAN OFF OF RAIL HITTING CONTRACTOR.DAMAGE INCLUDES LACERATIONS TO FA CE AND HEAD FRACTURE ON NOSE COMPOUND FRACTURE OLEFT HUMERUS AND FRACTURE TO RADIUS AND ULNS (RT ARM).

OPERATOR USING CONDUIT PIPE TO PUNCH MUD FROM UNDER A DISINTEGRATOR. LARGE PIECE OF MUD RELEASED FALLING ON CONDUIT KNOCKING FOREARM AGAINST METAL DOOR ON DISINTEGRATOR.

OPERATOR WAS USING A METAL POLE TO DISLODGE A PIECE OF LINING FROM A CHUTE LEADING TO THE DRYER KILN. THE POLE HIT THE PLATE WHICH BLOCKS THE CHUTE AND THE PLATE FELL OUT OF THE CHUTE HITTING THE OPERATOR ON TOP OF HIS RIGHT WRIST. THE INJURY CONSISTED OF CONTUSION AND ABRASIONS ON RIGHT WRIST.

OPERATOR WAS ATTEMTPING TO BOOM THE TAILGATE OF A DUMP TRUCK.AS HE PUSHED ON THE BOOM IT CAUGHT HIS HAND BETWEEN THE BOOM AND THE TAILGATE.DRILLING THE MUSCLES AND TENDONS IN HIS RIGHT HAND AN D 3RD AND 4TH FINGERS OF RIGHT HAND.

I NAME WAS LOADING A HOPPER CAR & WAS SWINGING A PIPE AROUND PLACE IT IN A DIFFERENT LOCATION DURING THE SWINGING PROCESS HE FELT SOMETHING PULL IN HIS LOWER BACK

SWEEPING PLANT AREA-HIT ELBOW ON I-BEAM.

I.NAME WAS LOWERING A STEEL BEAM WITH A ROPE. THE ROPE UNBALANCED THE BEAM AND THE BEAM MASHED HIS THUMB.

EMPL WAS USING PRY BAR TO RAISE MILL ROLLER. PRY BAR LIPPED & EMPL FELL ON HAND BREAKING RIGHT THUMB ABOVE KNUCKLE.

EMPLOYEE WAS TIGHTENIGN MOTOR BELTS ON SHREDDER. EMPLOYEE PUT PRESSURE ON THE CHANNEL LOCK AND DISLOCATED RIGHT THUMB.

EMPL WAS USING A PIPE WRENCH TO FREE A STALLED AUGER THE WRENCH SLIPPED OFF THE AUGER HITTING THE EMPL IN THE FOREHEAD THIS CAUSED A LACERATION

USING WRENCH TO LOSEN ROD ON MILL. WRENCH SLIPED OFF AND HIT HIM IN MOUTH.

EMPLOYEE WAS CL9ANING ROTEX CHUTES USING A PIPE. PIPE SLIPPED AND POPPED RIGHT SHOULDER.

THE EMPLOYEE WA8 USING A COUNTER-WEIGHT TO BALANCE A ROTEX. WHILE PERFORMING THIS TASK, HE INADVERTENTLY DROPPED A WASHER AND A BOLT.WHEN HE REACHED TO PICK THEM UP, THE COUNTER-WEIGHT FELL A ND FRACTURED HI8 RIGHT MIDDLE FINGER.

EMPO WAS USING 4RENCH TO TIGHTEN A CAP SCREW ON A SHREDDER PLATE. THE WRENCH SLIPPED OFF AND HE HIT HIS THUMB ON A PIECE OF METAL

EMP WAS PULLING3A THRUST ROLLER FROM UNDER THE DXX DRYER. HE WAS USING A C ROWBAR TO SCOOT THE ROLLER OUT. THE WEIGHT SHIFTED AND IT FELL ON THE EMPLOYEES ARM

THE EMPLOYEE WA8 USING A SHOVEL TO CLEAN UP THE MILL ROOM. WHILE LIFTING THE SHOVEL, HE STRAINED A MUSCLE IN HIS BACK.

THE EMPLOYEE WAS STRIKING A SMALL CHISEL WITH A HAMMER WHEN THE HAMMER GLANCED OFF THE CHISEL AND HIT HIS FINGER CAUSING LACERATION TO THE TIP OF THE SECOND FINGER ON THE LEFT HAND.

THE EE WAS USING A CRAFTSMAN HAND WRENCH TO LOOSEN A BOLT. THE WRENCH SLIPPED CAUSING THE EE TO HIT A METAL BRACE WITH HIS LEFT ELBOW CAUSING A LACERATION TO THE LEFT ELBOW.