Buscar en el registro

Emp was using a utility knife, it slipped and cut his left arm. Stitches required.

EMP WAS USING A UTILITY KNIFE, CUTTING TOWARDS HIMSELF AND CUT HIS KNEE. EMP MISSED 1 DAY OF WORK AND HAD ONE SUTURE.

emp stated his wrist was sore from beating ice off of steel. emp did not seek medical treatment until 12/26/07 where he was given a presciption and limited use of his wrist.

Emp was making repairs at plant, when hammer slipped out of his hand and struck his left knee.

Emp was performing maint. on plant. Emp was using a hammer, missed pipe hit finger. Finger was broken.

Employee dropped cutting edge onto foot causing a fracture of the right foot.

EMP. DROPPED A PIPE WRENCH ON LEFT FINGER.

WHILE CLEANING OUT CRUSHER, A LARGE STONE CAME DOWN & HIT EE ON LEFT FOOT.

EE WAS TIGHTENING A BOLT ON A TRANSMISSION WHEN HE FELT A TEAR IN HIS LEFT ELBOW.

EMPLOYEE WAS HOLDING WRENCH, WHILE OTHER EMPLOYEE HIT WRENCH WITH HAMMER. WORKING ON 751 CRUSHER

EMPLOYEE WAS TIGHTENING AIR LINE ON EUCLID WHEN HE FELT SHARP PAIN IN HIS BACK.

EE WAS USING AWRENCH TO TAKE BOLTS OUT OF CRUSHER WHEN HIS ARM WENT NUMB. NOTE: EE DID NOT SEE DR. UNTIL 10-02-2000.

EE WAS REMOVING A BRAKE CHAMBER WHNE DIRT WENT BEHIND HIS GLASSES AND INTO HIS EYE.

EE WAS TRYING TO REMOVE A JAMMED ROCK FROM DEAD BOX, WHEN IT DISLODGED HE CAUGHT A PIECE OF METAL AND CUT HIS LOWER FOREARM.

EE WAS CLEARING A JAM WITH DIGGING BAR WHEN A ROCK HIT THE DIGGING BAR AND IT PUSHED THE SAFETY GLASSES INTO THE EE'S FACE. THIS RESULTED IN A SMALL LACERATION UNDER THE RIGHT EYE, REQUIRING T WO STITCHES.

WHILE USING A SLEDGE HAMMER, THE EMPLOYEE BEGAN FEELING PAINS IN HIS THUMB ON HIS RIGHT HAND.

WHILE DRIVING A PIN OUT OF THE CRUSHER, THE HAMMER SMASHED HIS FINGER BETWEEN THE PIN AND A 4X4 HE WAS USING.

EE WAS REMOVING THE SCREEN GUARDS TO GAIN ACCESSTOT HE BELTS. THE WRENCH SLIPPED FROM HIS HAND AND HIS LEFT ARM SLID ACROSS THE SCREEN CAUSING ASMALL LACERATION WHICH REQUIRED 4 STITCHES.

EMPLOYEE WAS SERVICING A EUCLID USING A WRENCH. WHILE WORKING ON THE MACHINE, A PIECE OF PAINT FELL BEHIND HIS GLASSES AND GOT INTO HIS EYE.

EMPLOYEE WAS WORKING ON CONVEYORS AT CRUSHER. HE WAS PUSHING ON A 4 FT LENGTH OF PIPE AND A RATCHET ATTEMPTING TO LOOSEN BOLTS. AS HE PUSHED HE FELT A BURNING SENSATION IN HIS GROIN AREA.

DRIVER WAS REPAIRING TARP SYSTEM ON TRUCK, CUTTING A PIECE OF METAL TUBING WITH A HACKSAW AND VISE. AS HE FINISHED CUTTING THROUGH THE TUBING HIS RIGHT INDEX FINGER HIT THE CUT EDGE OF THE SAW . HE RECEIVED STITCHES.

THE WORKER WAS TIGHTENING BELTS ON CONVEYOR WITH A BELT JERK.THE BELT JACK SPUN AROUND ACCIDENTALLY AND HIT HIM ON HIS RIGHT FOOT.

INSTALLING A SET OF ROLLERS ON THE PLANT USING A HAMMER & WRENCH WHILE INSTALLING ROLLERS WORKER FELT SOMETHING GO INTO HIS EYE(METAL SHAVING) HE WAS WEARING SAFETY GLASSES

THE WORKER WAS HELPING MAKE ADJUSTMENTS TO THE PLANT USING A HAMMER AND AN ALLEN WRENCH. WHEN STRIKING THE ALLEN WRENCH WITH THE HAMMER, THE WRENCH FLEW BACK STRIKING HIM IN THE MOUTH.

WORKING WITH ANOTHER MAN DRIVING A PIN OUT WITH A HAMMER WHEN A METAL SPAR BROKE OFF AND STRUCK EE IN FOREHEAD.

REMOVING TRIM AROUND WINDOW WITH UTILITY KNIFE, HAND SLIPPED LACERATING RING FINGER ON RIGHT HAND.

61208OLDING ELECTRICAL PLUG IN HIS LEFT HAND USING A SCREWDRIVER IN HIS RIGHT HAND TO TIGHTEN NEW SCREWS. SCREDRIVER SLIPPED AND PUNCHTURED LEFT THUMB.

WORKING ON COVEYOR FLASHING LOOSENING BOLTS.APPLIED PRESSURE TO WRENCH WHEN SHARP PAIN OCCURRED IN BACK.

PUSHING DOWN ON3WRENCH WHILE REMOVING STUDS ON WHEEL OF EUCLID,SOMETHING CRACKED IN BACK CAUSING SEVERE PAIN.

I NAME WAS SERV3CING HIS EUCLID AND WAS ATTEMPTING TO DIG MUD OFFTHE TRANSMISSION WITH A SCREW DRIVER WHEN HIS RIGHT HAND SLIPPED OFF THE SCREW DRIVER AND FORCEFULLY STRUCK THE SIDE OF THE TRA NSMISSION. 3

WHILE SCRAPING 7ATWALK OF CRUSHER WITH A WOODEN HANDLED SCRAPER, TO FREE SOME FROZEN DIRT, A SHARP PAIN DEVELOPED IN LOWER BACK

I,NAME AND ANOT2ER EMPLOYEE WERE DRIVING A BUSHING OUT OF A CRANE BOOM. I,NAME WAS HOLDING THE PUNCH AND AS THE OTHER EMPLOYEE POUNDED THE BUSHING THE HAMMER GLANCED OFF AND HIT HIS HAND.

HELPING REPAIR 7RACK ON SHOVEL EMPLOYEE WAS HOLDING BAR TO PUSH OUT PIN ON TRACK ROLLER HAMMER GLANCED OFF PIN & STRUCK EMPLOYEE ON FACE UNDER LEFT EYE

HELPING TO CHANGE SCREENS ON PLANT WHILE USING A WRENCH IT SLIPPED AND A BOLT HEAD CUT INDEX FINGER ON RIGHT HAND

INSTALLING NEW UNIVERSAL JOINTS IN DRIVE LINE WRENCH SLIPPED AND HIT MAN ON FOREHEAD ABOVE LEFT EYE AND REQUIRED 4 SUTURES.