Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
The Employee was TIGHTENING a HOSE CLAMPS with a SCREWDRIVER and the screwdriver slipped AND PUNCTURE LEFT HAND.
breaking loose material with a bar and hammer the employee felt a sprain/strain in his left shoulder.
Employee was changing a bearing on a screen and while pulling hard to break a bolt loose strained his abdomin.
As the employee was using a hammer to loosen a tooth from a loader bucket, a sliver of metal from the tooth chipped off and became imbedded into the employee's hand.
As the employee was cutting a piece of rubber for a skirtboard, the utility knife that he was using slipped and cut his left hand.
The employee lacerated the palm of his hand on the blade of a utility knife that he was using to cut rubber nosing for #3 screen.
AS THE EMPLOYEE WAS KNOCKING OFF DUST AND STONES FROM A CONVEYOR CATWALK WITH A METAL BAR, HIS RIGHT INDEX FINGER BECAME PINCHED BETWEEN THE METAL AND THE SIDE OF A CONVEYOR, CAUSING A LACERATION.
WHILE THE EE WAS DRIVING OUT BROKEN BOLTS FROM THE AC500 CRUSHER, THE 4-POUND HAMMER DEFLECTED OFF OF A BROKEN BOLT AND STRUCK THE BACK OF HIS RIGHT HAND.
WHILE THE EE WAS ASSISTING IN TIGHTENING BELTS ON THE VSI CRUSHER, THE RATCHET ADJUSTER SLIPPED, CAUSING HIM TO SMASH HIS THUMB BETWEEN THE RATCHET AND THE MOTOR MOUNT.
WHILE ASSISTING IN PULLING A SIDE PLATE FROM THE OUTSIDE OF THE PRIMARY CRUSHER, A CO-WORKER WHO WAS POSITIONED ON THE OTHER SIDE OF THE PLATE, SWUNG A SLEDGE HAMMER TO LOOSED THE PLATE AND ST RUCK THE EMPLOYEE'S FINGER.
EE LACERATED HIS THUMB WITH A UTILITY KNIFE WHILE CUTTING A PIECE OF RUBBER FOR A BELT SCRAPER.
INJURED EMPLOYEE WAS LOOSENING A 489 CRUSHER TO MAKE ADJUSTMENTS. WHILE OPERTING THE CHAIN JACK THE EMPLOYEE FELT A PULL IN HIS LOWER BACK. EMPLOYEE HAS NOT MISSED WORK, HUT HAS STARTED PHYSIC AL THERAPY ON 5.22.98
A CHUTE AT PRIMARY CRUSHER HAD JAMMED AND EE WAS SHOVELING AND UNJAMMING CHUTE.
EE WAS DOING REPAIR ON CRUSHER. HE WAS HOLDING A BOLT WITH A WRENCH WHILE ANOTHER EE WAS TIGHTENING THE NUT. THE WRENCH TURNED AND PINCHED HIS 2ND FINGER ON LEFT HAND.
EMPLOYEE WAS TIGHTENING A BOLT. WHEN THE WRENCH SLIPPED THE EMPLOYEE LOST HIS FOOTING AND FELL HITTING HIS KNEE.
EMPLOYEE WAS CHANGING BARS IN CRUSHER HE WAS USING A CHAIN HOIST TO POSITION BAR & THE HOIST CAUGHT THE CRUSHER LID PROTECTION BAR WHICH UNSEATED BAR & FELL & HIT EMPLOYEE ON THE BACK EMPLOYEE WAS WEARING HEAD PROTECTION WHICH PREVENTED ANYSERIOUS HEAD INJURY
EMPLOYEE HAD A ROCK WEDGED AT CRUSHER BOX. WHEN PRYING WITH A DIGGING IRON THE ROCK KICKED BACK WHICH CAUSED SHOULDER STRAIN AND PARTIAL DISLOCATION.
EMPLOYEE WAS REPLACING RUBBER UNDER CRUSHER SCREEN. WHILE CUTTING RUBBER WITH A UTILITY KNIFE HE LACERATED HIS LEFT THUMB.
EE USING A RATCHET AND SOCKET TO TIGHTEN A STRAP ON A SHAKER. WHILE TIGHTENING THE BOLT FOR THE STRAP. THE WEDGE WASHER BROKE AND FLEW UP HITTING EE ABOVE RIGHT EYE.
EMPLOYEE WAS HELPING REPAIR A PULVERIZING MILL HE REACHED INTO THE MILL TO PUT A NUT ON A BOLT. AFTER TIGHTENING THE NUT, HE PULLED HIS ARM DOWN OUT OF THE SPACE AND BRUSHED AGAINST A SHARP BU RR ON THE SIDE OF A METAL RING.
EMPLOYEE WAS USING A HAMMER TO HAMMER ON A CLOGGED OVERHEAD CHUTE WHICH FED LIMESTONE INTO THE PULVERIZER. HE HAMMERED ON THE CHUTE, AND THE HAMMER BOUNCED BACK AND HIT HIM IN THE MOUTH.
EMPL WAS USING SOCKET WRENCH WHILE REPLACING BELT SCRAPER AT HEAD PULLEY OF PRIMARY BELT ON PORTALE PLANT. WHILE PULLING ON WRENCH IT SLIPPED OFF NUT & HIT EMPL ON UPPER LIP.
EMPL USING CHAI3 HOIST TO REPLACE ROLLER IN LIMESTONE PULVERIZING MILL.A WEIGHT WAS HOOKED IN CHAIN TO KEEP IT TAUT AND REMOVE SLACK.WEIGHT UNHOOKED FROM CHAIN AND FELL ON EMPL HAND.