Buscar en el registro

Employee was removing a shaft bearing when EE struck EE's left little finger with a 4-pound hammer, sustaining a laceration requiring stitches.

While employee was resetting the hammers on M48 Crusher, the tool that was been used slipped out of their hands impacting EE in the lip.

The utility Knife employee was using to cut a section of the conveyor belt slipped causing a laceration of right leg.

The utility knife the employee was using to cut the skirt rubber slipped causing a laceration of employee's arm.

A piece of anvil broke loose impacting EE leg; requiring 4 stitches; when EE struck the anvil to be removed with an 8 pound sledge hammer.

EE WAS USING A SLEDGE HAMMER TO REMOVE THE BLOW BARS FROM THE STEDMAN CRUSHER. WHEN THE SLEDGE HAMMER IMPACTED THE BARS IT RICOCHETED HITTING HIS LOWER RIGHT LEG.

Employee was attempting to hammer the pin that holds the tilt cylinder on a 98H loader into place. The pin fell hitting him on the left leg just below the knee causing a laceration which required stitches.

EE was holding the bladder with a pair of vice grips while a co-worker was removing the steering accumulator. The vice grips opened striking EE on his lower lip.

Installing a guard near the timing belt, Injury hit his hand with a crescent wrench.

While loosening the liner from a cone crusher with a hammer a piece of metal came off and entered his hand.

Employee was hammering a tooth on a loader bucket to loosen it for removal. A metal chip came off the bucket tooth and lodged in his left arm.

Employee struck his L-hand middle finger with a sledge hammer while hammering piece into place resulting in a closed fracture to middle phalanx.

CUTTINT DELIVERY BELT DURING REPAIR WORK WHEN THE KNIFE SLIPPED, CUTTING EE'S LEFT ARM.

PIECE OF METAL FROM A CHIPPING HAMMER WENT INTO EE'S HAND

FINGER CAUGHT BETWEN A BAR & THE PLANT FRAME

USING WRENCH TO ADJUST HAMMERS WHEN HE FELT A PAIN IN HIS UPPER BACK.

HAMMERING PIN INTO A STEERING CYLINDER WHEN THE PIN SLIPPED AND PUNCTURED HIS LEFT LEG.

BALL HAMMER HEAD STRUCK LEFT HAND.

FELL BACKWARDS WHILE PULLING ON A HOSE.

FINGER CAUGHT BETWEEN TWO PIECES OF METAL BEING BOLTED TOGETHER.

THE EE PLACED HIS HAND IN AN AREA THAT COULD BE CONSIDERED A PINCH POINT DUE TO THE NATURE OF THE ACTIVITY IN THIS AREA. THE SAME EE THEN USED ATOOL TO MANIPULATE A PIECE OF MATERIAL INTO THE AREA OCCUPIED BY HIS HAND. THE EE TRAPPED HIS THUMB BETWEEN THE MATERIAL & THE TOOL CAUSING LACERRATIONS.

WHEN CHANGING THE DRAG CABLE EMPLOYEE'S THUMB WAS CAUGHT BETWEEN THE HANDLE OF THE B & D (PUNCH TOOL) AND THE WALL OF THE DRAGLINE.

PRY BAR SLIPPED & HIT INJURED IN JAW.

SLIPPED WHILE CUTTING A CABLE RESULTING IN A MUSCLE PULL OF RIGHT ARM.

HE WAS USING A 1-1/2" WRENCH TO LOOSEN A BOLT SO THAT HE COULD CHECK ON THE OIL LEVEL OF S-81 CAT HAULER. THE BOLT LOOSENED. THE UPWARD MOTION OF THE ARM FROM THE BOLT LOOSENING CAUSED HIS ELB OW TO STRIKE THE RIM.

HELPING TO CHANGE TOOTH, EE HIT THE TOOTH WITH A HAMMER. A CHIP OF METAL CAME OFF AND PUNCTURED HIS FOREARM.

WHILE HITTING GATE WITH PIPE EMPLOYEE REARED BACK TO HIT THE GATE AND STRUCK HIS ELBOW ON THE I-BEAM.

EMPLOYEE WAS USING A WRENCH TO LOSEN AN ADJUSTMENT BOLT TO ENABLE HIM TO ADJUST CONVEYOR BELT. WRENCH SLIPPED PINNING HIS HAND AGAINST THE CONVEYOR FRAM.

WILLIAM WAS HOLDING A HOUSING FROM WHICH KEN WAS ATTEMPTING TO REMOVE A BEARING RACE. WHEN KEN HIT THE BEARING A PIECE OF STEEL CAME OFF STRIKING WILLIAM IN THE THROAT.

HE WAS INSTALLING HAMMERS IN THE PLANT'S M-33 STEDMAN CRUSHER. HE STRUCK A METAL PLATE WITH A HAMMER AND A SLIVER PIERCED HIS RIGHT INDEX FINGER. HE INDICATED HE DID NOT NEED MEDICAL ATTENTION . A WEEK LATER THE WOUND BECAME INFECTED.

DRAGLINE OPERATOR CHANGING TEETH ON BUCKET. THE KEEPER CAME OUT ,TOOTH STUCK ON BUCKET. OPERATOR USED A SLEDGE HAMMER TO HIT THE TOOTH. A PIECE OF METAL FLEW OFF AND STRUCK I.NAME IN RIGHT LEG

OILER TRYING TO REPAIR TEETH ON DRAGLINE, HAMMERING PC OF METAL FLEW IN LEG

TO CHANGE THE TEETH ON A DRAGLINE BUCKET I NAME WAS SWINGING A SLEDGE HAMMER WHILE DOING THIS HE FELT A SHARP PAIN IN THE STOMACH/GROIN AREA

WHILE WORKING ON A PLUGGEE CHUTE INT HE TERTIARY AREA. BIG ROCKS FELL FROMT HE UPPER LANDING. THE ROCKS HIT INJURED AND KNOCKED HIS HARDHAT FROM HIS HEAD.

USING A CROWBAR INJURED WAS TRYING TO DISLODGE A ROCK THAT WAS JAMMED INT EH ROAD ROCK CRUSHER. EH FELT A PAIN IN HIS LOWER BACK.

IN THE PROCESS OF REMOVING HAMMER WEDGES A PIECE OF STEEL WENT INTO THE ABDOMINAL AREA.

LOOSENING A BOLT TO SET M-48 CRUSHER,WRENCH SLIPPED OFF BOLT STRIKING LEFT LEG-SHIN.

I.NAME HELPING REPLACE DRAGLINE CABLE.WHEN CABLE WAS CUT,PORTION LEFT ON SPOOL SNAPPED BACK HITTING I.NAME IN GROIN AREA.

EE WAS REPLACING SKIRTBOARD RUBBER. HE WAS CUTTING THE SHIRTBAORD RUBBER WHEN THE KNIFE SLIPPED CUTTING HIS LEFT THUMB.

EMPLOYEE WAS USING A B & O HAMMER WHEN A PIECE SPLINTERED AND WENT INTO HIS RIGHT ANKLE.HE REMOVED THE STEEL AND WENT INTO THE ACCIDENT UNTIL 01-22-90 WHEN HE WAS EXPERIENCING COMPLICATIONS FR OM THE INJURY.

HE WAS ATTEMPTING TO KNOCK THE WEDGE HOLDING THE DRAGLINE CABLE TO THE DRUM OUT OF THE HOLE. HE WAS USING A BAR AND A SLEDGE HAMMER TO KNOCK IT OUT. WHEN HE HIT THE BAR WITH THE SLEDGE HAMMER, A PIECE OF METAL FLEW OFF AND WENT INTO HIS ARM

I NAME WAS DRIVING A KEEPER INTO A LOADER TOOTH WITH A SLEDGE HAMMER A PIECE OF METEAL BROKE OFF & PUNCTURED I NAME LEFT THIGH

THEY WERE TRYING TO PULL OUT THE BUCKET PIN FROM LOADER. HE HAD A BAR IN THE HOLE OF THE PIN TWISTING IT AS OTHER MAN TAPPED ON IT TO LOOSEN THE PIN. HE FELL BACKWARS HITTING HIS HEAD AND SH OULD ON THE TIRE RIM OF THE TRUCK BEHIND AND LANDING ON THE GROUND.

WHILE REMOVING A BOLT FROM A MACHINE PART THE EASY OFF BEING USED TO REMOVE THE BOLT BROKE OFF. THE MOMENTUM OF FIDEL'S HAND TURNING THE WRENCH CAUSE HIS HAND TO PASS OVER THE SHARP PART OF TH E BROKEN METAL - CUTTING HIS HAND.

I.NAME WAS WELDING HE WAS CHIPPING OFF EXCESS METAL WHEN PART OF IT BROKE OFF AND BECAME LODGED IN HIS LEG