Buscar en el registro

CHIPPING FEED CHUTE WITH CHIPPING HAMMER. METAL PARTICLE IMBEDED IN RIGHT EYE.

EMPLOYEE WAS USING EXCESSIVE FORCE TO CLOSE REFURBISHED HOPPER DOOR. WHILE DOING SO, LINING BAR SLIPPED AND EMPLOYEE JAMMED WRIST.

CUTTING PIECE OF CONVEYOR BELT WITH UTILITY KNIFE WHEN IT SLIPPED, CUTTING RIGHT LEG. SUTURES.

EE WAS CUTTING ON A PIECE OF CONVEYOR BELT WHEN HE SCRAPED HIS ELBOW ON THE BELT, AGGRAVATING BONE SPUR CAUSING FLUID TO ACCUMULATE.

CLEANING HEAD CHUTE WITH REBAR. MATERIAL BROKE LOOSE AND HIT REBAR, CAUSING IT TO HIT RIGHT INDEX FINGER.

BREAKING STUDS OFF BELT CLIP. TOOL BROKE CAUSINGARM TO MOVE AND BE PUNCTURED BY STUD. SUTURES REQUIRED/

USING BAR WHILE WORKING ON DRIVE LINE. BAR SLIPPED AND HIT LEFT INDEX FINGER. SUTURES.

SPLICING CONVEYOR BELT ON #3 STACKER AND CUT RIGHT KNEE WITH KNIFE.

CHANGING HAMMERS ON CECO CRUSHER AND HIT HIS KNEE WITH A HAMMER.

WHILE ATTEMPTINN TO OPEN BOX-KNIFE CUT HIS RIGHT THUMB. *SUTURES*

SHOOTING ASH RING & FELT PAIN TO LOWBACK AFTER RAKING BUILDUP LIGHT DUTY BEGAN 01-04-95

CHANGING BELT AND CUT BASE OF LEFT THUMB WITH RAZOR KNIFE. SUTURES PLACED.

EMPLOYEE WAS ATTEMPTING TO CUT A TIE ON A DRIVE CABLE WITH A KNIFE. WHEN THE TIE BROKE THE KNIFECAUGHT HIS THUMB. SUTURES PLACED.

PULLING A PIECE OF PIPE AND IT WAS STUCK. PRY BAR CAME LOOSE AND HIT EE ABOVE RIGHT EYEBROW.

TIGHTENING BOLTS ON WATER PUMP AND FELT STRAIN TO LOW BACK.

RAKING ASH WHILE SHOOTING ASH RING. FELT "POP" RIGHT SHOULDER.

EMPLOYEE WAS BLOWING OFF FIRING FLOOR WITH AIR HOSE. HOT CINDER BLEW INTO HIS RIGHT LEFT EYE.

EMPLOYEE WAS TIGHTENING BOLTS ON O&K CRUSHER AND PUNCTURED HIS RIGHT INDEX FINGER. ATIBIOTICS PRESCRIBED.

EMPLOYEE WAS INSTALLING COUPLER WITH A CO-WORKER AND THE CO-WORKER HIT LEFT 5TH FINGER WITH PIPE. FRACTURE.

EMPLOYEE WAS CLEANING LIME BUILDUP OFF GIANT FLANGE ON DUCAN FAN & HE HIT HIS RT KNEE WITH HAMMER

25632ING OUT ANVILS ON THE CRUSHER,HIT ANVIL WITH A SLEDGE HAMMER AND A CHIP HIT HIM IN THE RIGHT KNEE CAUSING A PUNCTURE WOUND.AN ANTIBIOTIC PRESCRIBED.

INSTALLING SCREEN BEARING AND HITTING WITH HAMMER. SLIVER OF HAMMER HEAD FLEW INTO EE S CHIN SUTURES PLACED.

TRYING TO OPEN DOOR OF R R CAR WITH SLEDGE IT BOUNCED AND CAUGHT R THUMB BETWEEN THE DOOR AND HANDLE

SHOVELING SWUNG HIT R HAND ON SHEET METAL

EMPL WAS LOCKING UP RAIL CAR. SLEDGE HAMMER REBOUNDED & HIT RIGHT EAR.

THE EMPLOYEE WAS SHAVING THE END OF A NEW HAMMER HANDLE WITH A KNIFE WHEN HE ACCIDENTALLY CUT HIS LEFT THUMB.

EMPLOYEE WAS USING A HAMMER AND CHISEL TO REMOVE A 1/4" METAL STUD FROM A CONVEYOR FRAME WHEN HE WAS STRUCK IN THE EYE WITH A SMALL PIECE OF METAL. EMPLOYEE HAD BEEN WEARING SAFETY GLASSES BUT REMOVED THEM JUST PRIOR TO THE ACCIDENT BECAUSE OF DIFFICULTY SEEING WITH A BIFOCAL LENS.

HE WAS USING UTILITY KNIFE TO SPLICE CONVEYOR BELT WHEN IT SLIPPED CUTTING LEFT THIGH.

USING KNIFE TO CUT RUBBER SKIRTING WHEN THE KNIFE SLIPPED CAUSING LACERATION TO LEFT FOREARM.

I NAME WAS PULLING ON HANDLE OF PRESS TO PRESS BEARING AND PULLED MUSCLE IN R ARM

EMPLOYEE WAS RAKING MATERIAL FROM KILN & HIT HIS LEFT LONG FINGER ON THE SAFETY GUARD PIPE AROUND OPENING LOST TIME BEGAN 053189

EMPLOYEE WAS TIGHTENING A 2 1/2" PIPE WRENCH WHEN IT SLIPPED HITTING EMPLOYEE'S LEFT ELBOW AGAINST I-BEAM SUPPORT OF PIPE.

EMPLOYEE PULLED ON A COME A LONG TO OPEN HYDRAULIC CHUTE AND NOTICED PAIN AND PROTRUSION TO UMBLICIAL AREA.

EMPLOYEE WAS KNOCKING PIN OUT OF HOIST CYCLINDER WITH HAMMER AND PIECE OF METAL PUNTURED CHEEK.

EMPLOYEE WAS REMOVING A NUT FROM A BOLT, WHEN THE WRENCH SLIPPED AND HIS ELBOW WAS CUT BY A PIECE OF METAL.

EMPLOYEE WAS PAINTING A GUARD BENT DOWN AND HEARD A POP IN RIGHT KNEE.

EMPLOYEE WAS CH3PPING CONCRETE OFF REBAR AND METAL CHIP FLEW OUT AND HIT RT CORNEA

EMPL GETTING WH9ELBARROW FULL OF DIRT TO COVER SPILLED OIL IN SHOP.AS HE PUSHED SHOVEL INTO DIRT LACERATED LEFT RING FINGER ON ROUGH HANDLE.

HAMMERING DRAG 1IN IN DRAGLINE, HIT END OF FINGER WITH SLEDGE HAMMER

HE WAS TIGHTENI3G A BOLT AND THE WRENCH SLIPPED OFF AND HIT HIS FINGER

EMPLOYEE WAS WO9KING UNDER A HAUL TRUCK KNOCKING A PIN OUT WHEN DUST FELL INTO HIS EYE

EMPLOYEE WAS PO5ING BASE MATERIAL WITH A STEEL BAR WHEN HE EXPERIENCED PAIN TO HIS BACK

EE WAS CLOSING A DOOR ON THE BOTTOM OF A RAIL CAR WHEN HE STRUCK HIMSELF IN THE KNEE WITH A SLEDGE HAMMER.

EMP WAS RAISING A 6" PIPE WITH A CHAIN BLOCK IN THE MAINTENANCE SHOP WHEN THE HOOK ON THE BLOCK SLIPPED OUT OF THE EYE WHICH WAS WELDED ON THE PIPE. EMPLOYEE STATES THAT HE WAS NOT WATCHING TH E HOOK THUS WHEN THE PIPE CAME FRE E IT F ELL ON THE INJURED EMPLOYEES FOOT BEFORE HE COULD MOCVE OUT OF THE WAY. THE PIPE FELL APPROX 3\ ACCORDING TO AN EYE WITNESS

CLEANING OUT CHUTE

EMP WAS ATTEMPTING TO ALIGN AN OIL STORAGE TANK ATOP A FLAT BED SERVICE TRUCK WHEN THE BAR SLIPPED AND EMPLOYEE FELL FROM THE TRUCK TO THE CONCRETE FLOOR

EMPLOYEE WAS USING A BAR TO LOOSEN SOME MATERIAL THAT HAD BUILT UP ON A CHUTE WHEN HE EXPERIENCED PAIN IN THE LOWER BACK

EMPLOYEE WAS INSTALLING AN AIR CONDITIONING UNIT IN A WINDOW FRAME. WHILE ATTEMPTING TO POSITION THE UNIT WITH A HAMMER THE EMPLOYEE MISSED THE AIR CONDITIONER AND STRUCK HIMELF IN THE KNEE.

EMPLOYEE HAD BEEN USING A PICK AND SHOVEL FOR SEVERAL DAYS PRIOR TO THE INJURY AT THE TIME OF THE INJURY THE EMPLOYEE WAS USING A CROW BAR TO LIFT A RAILROAD TRAKC SUPPORT PLATE WHEN HE NOTIC ED INCREASED PAIN IN HIS LOWER HIP AND BACK EMPLOYEE WORKED LIGHT DUTY UNTIL 011283