Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
WHILE TIGHTENING A NUT WITH; A WRECH, THE WRENCH SLIPPED OFF THE NUT & HE FELL BACK INTO THE CONTROL PANEL HURTING HIS RIGHT SHOULDER.
WHILE CLEANING TAIL PULLEY OF CRUSHER DISCHARGE BELT,T HE BELT ROLLED BACKWARDS, PULLING EMPLOYEES RIGHT ARM INTO TAIL PULLEY. THE BELT WAS LOCKED OUT, AND THE GUARD HAD NOT BEEN REMOVED. LE MPLOYEE WAS USING A BAR TO CLEAN AROUND TIAL PULLEY. WE HAD HELD SAFETY MEETINGS INVOLVING ALLE MPLOYEE EXPOSED TO THIS TYPE OF WORK, IN ORDER TO INSURE EVERYONE UNDERSTANDS THE DANGER.
EMPLOYEE HURT HIS LEFT ARM WHILE PUTTING A GRATE ROD IN CHAIN.
WHILE RAISING OIL FILTER ELEMENT FROM HOUSING AT FUEL PUMP AREA, HAND ON WINCH SLIPPED AND HITRIGHT HAND.
68935 USING A SLEDGE HAMMER TO DRIVE A PIN OUT OF A 35 TON CRANE WHICH WAS BEING PREPARED FOR SHIPMENT SHARP PAIN WAS FELT IN BACK ON RIGHT SIDE SHOULDER BLADE AREA THIS WAS THOUGH TO BE AN AG 79551TION OF AN EXISTING CONDITION BUT ON 8-6-92 JACKS DR REQUESTED THAT IT BE REPORTED AS A NEW INJURY.
WHILE INSTALLING A BUCKET TOOTH A METAL CHIP ENTERED RIGHT FORE ARM WHEN THE TOOTH WAS STRUCK BY A HAMMER, CAUSING A SMALL LACERATION. THE WOUND WAS CLEANED AND BANDAGED. ON A FOLLOW UP, IT WA S DISCOVERED THAT A SMALL FOREIGN OBJACT REMAINED IN THE ARM. THIS WAS REMOVED ON 6-9-92.
EE WAS USING METAL RAKE TO REMOVE CHUNKS OF REFRACTORY FROM A CHUTE FROM THE KILN DISCHARGE. HE ACCIDENTALLY DISLODGED THE METAL CHUTE COVER WHICH HIT HIS RIGHT FOREARM, RESULTING IN BRUISES & CONTUSIONS.
USING OPEN END WRENCH TO ADJUST COAL MILL ROLLS. WRENCH SLIPPED CAUSING HIS RIGHT INDEX FINGER TO HIT A NUT ON THE COAL MILL THE RESULT WAS CONTUSION OF RIGHT INDEX FINGER IN NAIL AREA.
TURNHEAD POSITIONING BAR SLIPPED OUT OF HIS HANDS. BAR HIT HIS LEFT SHOULDER. EE WAS STANDING ON AN ELEVATED PLATFORM WHICH CAUSED HIM TO BE IN A POSITION WHICH ALLOWED THE POSITIONING BAR TO HIT HIS SHOULDER.
WHILE UNPLUGGING THE CRUSHER THE BAR, HE WAS USING HIT THE HAND RAIL AND BOUNCED UP AND HIT THE SIDE OF HIS RIGHT EYEBROW CAUSING A CUT.
PACKING BAGS IN BALE USED KNIFE TO CUT PLASTIC CUT FINGER USED CLOSED WITH SUTURED
HE WAS USING A PRY ROD TO SEPARATE CRACKING ROLLS. PRY ROD SLIPPED CAUSING HIM TO FALL BACKWARD. HE CAUGHT HIMSELF BY GRABBING AN ADJACENT HAND RAIL. BY 7:23 HIS BACK STARTED HURTING HIM. ON 7 -25-90 HE TOLD US THAT THE PAIN WAS WORSE.
INJ WAS SWEEPING A CONCRETE FLOR USING A PUSH BROOM WHEN FOREIGN MATERIAL GOT INTO HIS RIGHT EYE. DAMAGE WAS LIMITED TO INFLAMATION OF FT. EYE.
USING PUSH BROOM TO SWEEP UNDER A BELT CONVEYOR SCRAPED 2ND FINGER OF RT HAND ON THE FRAME OF THE CONVEYOR I.NAME DID NOT NOTIFY ANY ONE FINGER BECAME SORE HE WAS SENT TO THE DR ON 7-6-88 AT TIME OF NOTIFICATION
I WAS SWINGING A 2LB HAMMER TO BEND SOME METAL & I GLANCED OFF TRHE METAL & STRUCK MYSELF IN THE KNEE
EMPLOYEE WAS SHOVELING FINES WHEN PARTICLE GOT INTO RIGHT EYE.
I NAME WAS WORKING UNDER THE PRECEIPITATOR SHOVELING THE FINES SOME ELEMENTS GOT IN HIS RIGHT EYE. HE WEARING ALL THE PROTECTIVE EQUIPMENT.
WAS USING SECTI2N OF RIGID CONDUIT (1/2" APPROX. 6 FT. LONG) TO POKE MOIST CLAY FROM HOPPER OF #1 KILN FEED. HE REPORTED THAT HIS BACK BECAME SORE WHILE PERFORMING THIS TASK.
THE INJURED WAS3USING A SHOVEL TO REMOVE CLAY BUILD-UP FROM THE BUCKET OF A FRONT END LOADER,WHEN A FOREIGN BODY GOT INTI HIS RIGHT EYE.FOREIGN BODY WAS REMOVED BY DR.ELLIS,CORINTH,MS.NO PERMA NENT DAMAGE RES6LTED.
I NAME OPENED A3CAN OF PAINT WITH A SCREWDRIVER, THE SCREWDRIVER SLIPPED AND CUT 3 FINGERS ON RIGHT HAND. THE LID WASA PARTIALLY OPEN AND THATS THE PART THAT CUT HIS FINGERS