Buscar en el registro

The employee was tightening bolts on a crusher head. While he was pulling on the torque wrench, his footing and wrench slipped causing a lower back strain.

Employee was unjamming a lightweight aggregate log in #3 cooler that was formed by an upset in the kiln. He was using an iron bar (10' long, 10lbs) to pry the log in the cooler. He was standing outside the cooler on a platform & when the log loosened/broke free, his momentum carried his left hand down onto the handrail resulting in left finger tip fracture & dissolvable stitches.

THE EE WAS CUTTING SKIRTS FOR A BELT CONVEYOR. THE BOX CUTTER SLIPPED FROM THE SURFACE OF THE BELT, AND CUT THE EE'S LEFT LEG.

THE EE WAS POKING AT MATERIAL THAT WAS IN AIRGATE. WHEN THE EE CONTINUED POKING HE PULLED SOME MUSCLES IN HIS SHOULDER.

EMPLOYEE WAS REMOVING A LOG FROM #4COOLER WHEN PRY BAR SLIPPED AND JAMMED FINGER AGAINST HAND- RAIL. RESULTING IN LACERATION TO FINGER. STITCH-ES REQUIRED.

EE WAS REMOVING A JAMMED CLINKER FROM THE CLINKER CHUTE OF COOLER WITH A PRYBAR. THE EE PULLED A MUSCLE IN HIS UPPER BACK.

WAS CUTTING THE LID OFF OF A PLASTIC CONTAINER WHEN THE KNIFE SLIPPED AND CUT HIS LEFT ARM NEAR THE ARTENAL VEIN.

EE WAS PREPARING TO LOAD A TRUCK-WENT TO REDIRECT FLAP TO DIRECT MATERIAL TO TRUCK-ROPE ON FLAP SLIPPED WHEN FLAP MOVED AND HOOK ATTACHED TO ROPE PINCHED THUMB BETWEEN HOOK AND SIDE WALL.

EE WAS SHOVELING BEHID #2 KILN BELT AND PULLED A MUSCLE IN HIS UPPER BACK.

EMPLOYEE WAS SWINGING A 16 LB MAUL TO A SMALL CONTACT POINT (PINCH BAR). EMPLOYEE MISSED CONTACT POINT ON 5TH STRIKE AND STRUCK CONTACT POINT WITH FINGER AND HANDLE, CUTTING LEFT INDEX FINGERT IP AND FRACTURED TIP. NAIL BED WAS ALSO DAMAGED.

EE WAS SWINGING A HAMMER AND PULLED MUSCLE IN BOTH SHOULDERS.

EE WAS ASSISTING IN THE REINSTALLATION OF THE BLADE ON THE MOTORGRADER. THE CHAIN ON THE COMEALONG SLIPPED RELEASING THE HOLD ON THE BLADE CAUSING IT TO STRIKE THE EE ON THE TOP OF HIS RIGHT STEEL TOED BOOT. RESULTED IN A FRACTURE OF HIS BIG TOE.

EE WAS UNCHOKING #3 COOLER WITH A BAR. THE BAR SLIPPED FROM UNDER THE BAG HITTING HIS FINGER BETWEEN THE BAR & HANDRAIL & BROKE HIS 5TH FINGER ON RIGHT HAND.

EE WAS CLEANING INSIDE PRIMARY HOPPER WITH A PICK AND ROD. HE TURNED HIS BODY INCORRECTLY AND PULLED A MUSCLE IN HIS BACK.

EE WAS WORKING ON PLOW AND HIT HIS LEG ON A PLOW - SKIN WAS BROKEN OPEN - 1ST AID ADMINISTERED ON 4-7-97. EE COMPLAINED ABOUT HIS LEG HURTING - SENT TO DOCTOR - ADMITTED TO HOSPITAL FOR BONE I NFECTION.

EE WAS ASSISTING IN BREAKING EXCESS BUILUP FROM #3 SCRUBBER WALL. A SIZEABLE PIECE OF THE BUILUP FELL FROM THE WALL STRIKING HIM ON THE LEFT SHOULDER AND ELBOW.

EE WAS WORKING ON #2 KILN INLET WHEN THE WRENCH HE WAS USING SLIPPED & HIT HIS HAND. HIS HAND THEN HIT AN ANGLE CAUSING A CUT ON HIS FINGER REQUIRING TWO STITCHES.

EE WAS HELPING TO CHANGE BEARING - HAD TO CHANGE COMPLETE GEAR BOX. COME-A-LONGS ON MOTOR & ONE ON GEAR BOX - HAD SLACK IN THE CHAIN - MOUNT CAME LOOSE FROM THE GEAR BOX & THE ADJUSTMENT BELTS 7" LONG CAME DOWN BETWEEN EE'S TWO FINGERS ON RING HAND CUTTING A GASH.

EE WAS ASSISTING IN JACKING UP KILN #2 AT PIER 3 WITH 250 TON JACKS AND ELECTRIC POWER UINIT. AS JACKS WERE BEING RELEASED ONE AT A TIME, THE VERTICAL HEIGHT DIFFERENCE BETWEEN THE JACKS CAUSE D THE SADDLE TO INCLINE TO ONE SIDE. THE PRESSURE BEARING DOWN ON THE SADDLE CAUSED A FILLER BAR TO SHOOT OUT AND STRIKE EE ON HIS LEFT HAND.

REMOVING A LEG FROM 3 COOLER BAR SLIPPED HITTING EE ON THE HEAD AND HE WAS WEARING HIS HARD HAT CAUSING HIS INJURY.

EMPLOYEES HAND SLIPPED WHILE TURNING A WRENCH LACERATING THE LONG OR MIDDLE FINGER OF HIS LEFT HAND THE WOUND WAS TREATED ON SITE WITH FIRST AID PROCEDURES(DISINFECT ANT & BANDAGE) AFTER SWELL ING WAS NOTED 05-09-95 DOCTOR TREATED EMPLOYEE FOR CELLULITIS

EMPLOYEE WAS ATTEMPTING TO OPEN THE TRAP DOOR ON A RAILCAR HE WAS CLEANING WITH A CROWBAR. WHEN THE CROWBAR RELEASEAD FROM ITS HOLD, EMPLOYEE TWISTED HIS BODY FROM THE FORCE HE WAS EXERTING UP ON THE CROWBAR. HE TWISTED HIS ANKLE SIDEWAYS & THEN PLACED THE ENTIRE BODY WEIGHT UPON THE ANKLE. THE BODY WEIGHT PUT UPON THE TWISTED ANKLE CAUSED A FRACTURE OF THE RIGHT ANKLE.

THE EMPLOYEE WAS HELPING TO REMOVE A RING IN THE #2 KILN USING A SHOTGUN. HIS SHOULDER BECAME SORE THE NEXT DAY.

WHILE CLEANING #3 SCRUBBER, A LARGE CHUNK OF LIME FELL ON LEFT FOOT.

EMPL HELPING CLEAN 3 SCRUBBER MIXING CHAMBER WHEN PIECE OF METAL FELL FROM THE NEXT LEVEL UP.30'. MAINTENANCE CREW WAS WORKING ON THE PLATFORM DIRECTLY ABOVE THE EMPL. THEY HAD REMOVED THE EXPANSION JOINT STRAPS & PLACED THEM ON THE LIP OF THE JOINT. EMPL WAS BEATING ON WALL OF MIXINGCHAMBER WHEN THE STRAP FELL, STRIKING EMPL ON THE HEAD.

THE EE WAS POSITIONING A HYDRAULIC JACK UNDER THE KILN WHEN THE JACK TURNED OVER AND CAUGHT HIS FINGER.

EMPLOYEE WAS PRYING CASTIBLE FROM OVERHEAD IN #3 KILN HE WAS STANDING DOWNHILL FROM MATERIAL WHEN A PIECE OF THE CASTIBLE FELL ON HIS RIGHT FOOT

WHILE CLIMBING DOWN A LADDER, THE EMPLOYEE PLACED HIS RIGHT HAND BETWEEN THE KILN TIRE AND THE LUG. THE JACK WHICH WAS HOLDING THE TIRE IN PLACE SLIPPED ALLOWING THE KILN TIRE TO MOVE BACK INT O ITS ORIGINAL POSITION, PINCHING IS FINGERS.

CONNECTING UNION HALVES TOGETHER HAND SLIPPED CAUSING HIM TO CUT HIS L ARM

WORKING ON KATO, TAKING OFF A C UNIT, THE ENGINE WALL STILL HOT, WRENCH SLIPPED PULLE MUSCLE ON SOMETHING IN L ARM

EMPL WAS REMOVING SPROCKET FROM SHAFT WHEN SLIVER OF METAL STRUCK HIM IN ARM. HE WAS SENT FOR MEDICAL ATTENTION TO REMOVE PIECE OF METAL.

EMPL WAS USING SHOTGUN TO SHOOT RING OUT OF KILN WITHOUT NECESSARY EAR PROTECTION. HE SAID THAT HE WAS NOW HAVING DIFFICUTLY HEARING OUT OF LEFT EAR. HE WAS SET UP WITH APPOINTMENT TO HAVE HEA RING EVALUATED. MY 091890A300918901500070028121

EMPL WAS WORKING INSIDE #3 SCRUBBER CLEANING OUT MUD & HARD MINERAL DEPOSIT BUILD UP OFF WALLS. HE WAS USING PICK TO PRY MINERAL DEPOSIT BUILD UP IT BROKE LOOSE & FELL ON RT ANKLE & BRUISED IT .

THE EMPLOYEE WAS TIGHTENING A BOLT ON THE SCRUBBER PUMP. HIS WRENCH SLIPPED RESULTING IN A CUT TO HIS RIGHT FOREARM.

HE WAS PULLING LOGS OUT OF COOLER WHEN THE BAR SLIPPED FROM UNDER THE LOG AND THE EMPLS ARM CAME DOWN ON THE HAND RAIL

EMPL WAS OPENING STEEL DOORS ON #1 KILN USING WINCH HOIST. HE LOST HIS GRIP ON WINCH HANDLE & IIT RECOILED STRIKING LEFT HAND.

EMPLOYEE WAS CUTTING A PIECE OF CONVEYOR BELT WITH A BOX KNIFE. KNIFE SLIPPED AND CUT HIS LEFT THIGH.