Buscar en el registro

WHILE EE WAS HITTING THE BACK SIDE OF A SPIKE PULLER, A PIECE OF METAL CAME UP AND HIT EE IN THE UPPER RT ARM.

WHILE BANGING THE BOTTOM DECK AT THE RECRUSH SCREENS, A STONE FLEW UP AND STRUCK EMPLOYEE, CHIPPING HIS FRONT TOOTH.

EE WAS DRIVING STEEL WEDGE BEHIND CONCAVE BLOCK IN CRUSHER WHEN WEDGECAME OUT STRIKING EE ABOVE THE RIGHT EYE.

WHILE EE WAS TIGHTENING NUT ON TOP DECK SCREEN, THE WRENCH SLIPPED OFF THE NUT.

EE WAS SWEEPING OFF THE FLOOR MATS WHEN HE GOT DUSTED.

WHILE CHANGING A SCREEN IN THE MILL, EE WAS HOLDING SCREEN SO IT COULD BE KNOCKED INTO PLACE AND ANOTHER EE SWUNG WITH HAMMER MISSING SCREEN AND HITTING EE'S THUMB.

INJURED WAS SWINGING A HAMMER AND PINCHED HIS HAND AGAINST A CONVEYOR.

EE TRYING TO UNPLUG BOX OVER IMPACT WITH PRYBAR, STRAIN RIGHT SIDE OF GROIN.

WHEN REMOVING BATTERY CABLE ENDS & INSTALLING NEW ENDS ON EQUIP. #509434 EE PINCHED HIS LEFT INDEX FINGER BETWEEN THE HANDLES OF THE CRIMPING TOOL.

9?514E CLEANING ROCK OUT OF TOP DECK OF SCREEN AND THE HAMMER STUCK. I.NAME FELL AGAINST HANDLE.

INJURED WAS PRYING A SCREEN CLOTH WHEN THE PRY BAR SLIPPED AND HIT HIKM IN THE UPPER LIP.

I.NAME CUTTING PIECE OF CONVEYOR BELT TO INSTALL PATCH IN RC.2 CONVEYOR AND CUT HAND WITH KNIFE.

VERY COLD CONDITIONS WEARING HEAVY GLOVES SWINGING HAMMER ON A WRENCH THE WRENCH SLIPPED CAUSING RIGHT AHND WITH HAMMER TO JAM.

WHILE JACKING UP A SNUB PULLEY PREPARING TO SPLICE A 54" BELT THE PIPE SUPPORTING THE COME-A-LONG JERKED,CAUSING A SLEDGE HAMMER WHICH WAS ON THE BENT PULLEY TO FALL ABOUT 4 TO 5 FEET,STRIKING INJURED ON THE HEAD.LACERATION REQUIRED SUTURES

WHILE CUTTING OFF OLD CONVEYOR BELT BELT KNIFE SLIPPED AND EE CUT HIS LEFT LEG.

WHILE SWINGING SLEDGE HAMMER TO DRIVE WEDGE IN 5 1/2' CRUSHER EMPLS LEFT HAND SLIPPED OFF HAMMER & HE PULLED SOMETHING IN RIGHT ARM.

I.NAMES'HAND STRUCK BY HAMMER WHILE HOLDING SIDE PLATE OTHER EMPL WAS SWINGING HAMMER AND HANDLE CAUGHT ON BEAM CAUSING IT TO MISS PLATE AND HIT I.NAME.

WHILE TRAINING 4A CONVEYOR THE BOLT SUDDENLY LOOSENED AND INJURED PINCHED HIS FINGER BETWEEN WRENCH AND CONVEYOR FRAME.

CLOSING CRUSHER SWINGING SLEDGE HAMMER STRAINED L WRIST

WHILE SPIKING WENT FROM LEFT TO RIGHT MOTION USING THE HAMMER AND CREATED A SPRAIN IN HIS LEFT ELBOW.

LAYING IN TWISTED POSITION CLEANING 3/8 CHUTE WITH SHOVEL.WHEN PUSHING UP AND TWISTING SHOVEL FELT SHARP PAIN IN LOWER BACK.

TORQUE WRENCH SLIPPED OFF DRIVESHAFT BOLT OF 992 LOADER.

WHILE TIGHTENING BOLTS ON SPIDER 42-45 EMPL BENT DOWN TO MOVE ANOTHER WRENCH WHEN WRENCH THEY WERE USING FELL HITTING EMPL IN BACK.

HOLDING LARGE MOTOR LEED IN LEFT HAND AND STRIP ING INSULATION THE KNIFE SLIPPED AND CUT LEFT WRIST.

WHILE DRIVING OUT TRACK PIN WITH PUNCH & HAMMER HAMMER GLANCED OFF PUNCH HITTING EMPL IN CHIN. EMPL WAS HOLDING PUNCH WITH LONG PLIERS.

WHEN HITTING SCREENDECK WITH S LEDGEHAMMER I.NAME LOST HIS FOOTING & HIT HIS FINGER BETWEEN HAMMER HANDLE & SCREENDECK

WHILE TAPPING A PIECE OF WOOD INBETWEEN TO CONCAVE, THE WOOD SPLINTERED AND W E NT INTO HIS LEFT EYE.

WHILE SHOVELING OUT ROCK FROM B EHIND THE JAW I.NAME SHOVEL SLIPED & HE FELL AGAINST THE JAW & TWISTED HIS RT.ARM

I,NAME WAS CLEANING CHUTE WITH A PICK WHEN HE FELT IT PULL.

I NAME HAD WORKED WITH HEAVY HOSE BLOWING WATER OUT OF BLAST HOLES WHEN HANDLING A LARGE PIPE WRENCH BREAKING DRILL STEEL HE EXPERIENCED BACK PAIN

WHILE SWINGING SLEDGE HAMMER, HITTING PROCESS SHUTE, FRANCIS BOUCHER FELT SHARP PAIN IN LOWER BACK.