Buscar en el registro

The employee was cutting a conveyor belt with a knife on his hands and knees, the knife slipped and cut him above the right knee.

Unplugging crusher, when pry bar got caught in crusher wheels, bar then came up and hit EE under neck. Knocked EE out, chipped teeth, hit head and hurt back.

Worker was taking link out of elevator and was pulling on come along cable when it gave way and extended. He then hit his right hand on side of elevator causing the right hand to swell. Reported 7-16-07 went to doctor 7-25-07.

Was trying to unplug crusher from platform with pry bar, when one rock fell out of crusher tray on top of right foot.

Reportedly this employee was injured on the job 11/8/06 but the injury was not reported until 2/5/07. The wrench he was using to replace the transmission slipped and caused his left elbow to strike the frame of the dump truck.

Employee was working and a chain broke letting come along fly back and hit his shin. We were told by him what happened but did not think anything was wrong at the time and did not want to go to DR.

EE was tightening vice to work on nozzel and the wrench broke. It came up and hit him right between his eyes, breaking his glasses. It also hit the left side above his eye. He was given first aid and went to concentra for stitches above his eye.

Employe was repairing a broke shaft on tiller and wrench slipped and stuck blade in right forearm.

HIT RIGHT INDEX FINGER WITH STAPLE GUN (HAMMER TACKER).

EE WAS CHANGING ADJUSTMENT ARM ON EAST MILL BOTTOM ROLLS WHEN WRENCH SLIPPED & HIT EE ON LEFT SIDE OF NOSE.

EE WAS TRYING TO PULL A PIECE OF PLASTIC OUT OF THE HANDLE MAKER ON THE FORM FILL AND SEAL MACHINE, WITH A PAIR OF NEEDLE NOSE PLIERS. WHEN IT CAME UNDONE SHE ACCIDENTALLY HIT HERSELF IN THE M OUTH, CAUSING HER LIP TO BUST OPEN AND HER TOOTH TO CHIP.

UNPLUGGING THE CRUSHER WITH THE ROCK BAR ON TOP. FELT PAIN INLEFT SHOULDER. SPRAIN OF SHOULDER.

TIGHTENING DOWN PREHEATER ELEMENTS AT FILTER FARM. SPRAIN OF UPPER ARM

EE WAS ADJUSTING BELT ON COOLER SILOS. WHILE PUSHING DOWN ON A WRENCH TO LOOSEN NUT THE NUT BROKE LOOSE & CAUSED HIM TO STRAIN HIS SHOULDER. ACCIDENT WAS REPORTED TO SUPERVISOR BUT EE DID NOT CONSIDER INJURY SERIOUS & DID NOT GO TO DR NOR WAS AN ACC RPT FILLED OUT UNTIL 5/28/99. HE WAS REFERRED TO AN ORTHAPAEDIC SURGEON 6/2/99 AND SURGERY TO REPAIR TENDON SCHEDULED 6/10/99

EMPLOYEE WAS WELDING ON KILN AND CHIPPING SLAG OFF WELD. FOREIGN OBJECT WENT INTO HIS LEFT EYE.

EE WAS HELPING A CO-WORKER SET THE FINISH MILLS. CO-WORKER WAS USING A WRENCH, WHICH SLIPPED AND HIT THE EE IN THE MOUTH. THIS CAUSED DAMAGE TO THE ROOT OF A LOWER FRONT TOOTH. EE WAS SENT TO A DENTIST - THE TOOTH WILL NEED TO BE EXTRACTED AND REPLACED WITH A BRIDGE. EE WAS SENT FOR A SECOND OPINION WITH THE SAME RESULTS.

EE WAS HITTING DUST BIN TO CLEAN IT & HIT HIS FINGER ON B0LT STICKING OUT OF BIN.

EE WAS USING WRENCH TO ADJUST THE SETTINGS ON THE FINISH MILLS. THE WRENCH SLIPPED AND CAUGHT HIS LEFT INDEX FINGER BETWEEN THE WRENCH AND MILL.

CUTTING RUSTED BOLTS, WHEN BOLT WAS CUT 1/2 WAY THROUGH HIT WITH HAMMER-THE BOLT BROKE & HAMMER HIT LEFT KNEE

WAS FORMING BAR STOCK TO FORM HANGER FOR PIPE WHEN JIG PIECE BROKE AND FELL BACKWARDS TO GROUND STILL RETAINING THE BAR STOCK IN HAND.

EMP WAS TRYING TO BREAK A NUT LOOSE WITH CHANNELLOCKS. THE TOOL SLIPPED CAUSING EMP TO HIT HAND ON A GREASE FITTING. THE CUT REQUIRED 3 STITCHESTO HIS RIGHT HAND. EMP HAS BEEN REINSTRUCTED IN THE PROPER USE OF TOOLS.

EMPLOYEE WAS DOING ROUTINE CLEAN UP WORK AND ALLEGEDLY HIT HEAD ON VERTICLE CONCRETE WALL.

WHILE PRYING ROTARY VALVE SPACER OUT, THE BAR USED SLIPPED AND CAME BACK AND HIT EMPLOYEE ACROSS THE BRIDGE OF THE NOSE AND RIGHT CHEEKBONE.

MAKING A FUNNEL OUT OF A PLASTIC JUG TO PUT OIL IN AN ENGINE, WHEN THE KNIFE SLIPPED & STABBED LEFT THUMB.

EMPLOYEE WAS WORKING ON CRUSHER & WAS AATTEMPTING TO ROTATE THE GREASE ZERK HOLE BACK INTO LINE WHERE IT WAS SUPPOSED TO BE USING A LARGE PIPE WRENCH EMPLOYEE WAS PUSHING UP ON THE HANDLE OF T HE PIPE & HEARD SHOULDER POP A LITTLE STRAINED SHOULDER

CATWALK WAS BEING LET DOWN TO GROUND FROM LOADER WITH CHAIN AND IT HUNG UP, AND EMPLOYE EPULLED TO GET IT DOWN IT CAME LOOSE AND FELL ON RIGHT FOOT. FRACTURED RIGHT FOOT.

EMPL WAS USING A SHOVEL TO CLEAN LOOSE CLAY FROMBASE OF COLLER. WIND WAS BLOWING OUT OF THE WEST& BLEW FOREIGN OBJECT INTO LEFT EYE. EMPL RE- CEIVED OINTMENT FOR HIS EYE & CONTINUED NORMAL JOB.

EMPLOYEE WAS CHANGING A SHAFT & BEARING ON SCREW CONVEYOR HE WAS USING A CHISEL WHICH BROKE WHEN HIT A SMALL PIECE OF THE BROKEN CHISEL ENTERED HIS LEFT WRIST WOUND REQUIRED STITCHES

42957 PRYBAR TO PUT CHAIN ON SPROKET CHAIN OVERSHOT PRYBAR SLIPPED STRUCK FOREHEAD