Buscar en el registro

PRY BAR SLIPPED STRIKING EE ON RIGHT SIDE OF FACE.

EMPLOYEES WERE STRAIGHTENING ANCHOR BOLTS WITH SLEDGEHAMMER. 2ND EE PLACED LEVEL ON BOLT AND WAS STRUCK ON LEFT INDEX FINGER WITH HAMMER.

EE WAS USING SHARPENED 1"X18" ROUND IRON TO PUNCCH DRAIN HOLES IN 55 GAL DRUM TO BE USED AS OUTSIDE TRASH CONTAINER. WHEN HE SWUNG THE STEEL PUNCH HE MISSED THE EDGE OF THE DRUM CAUSING HIS RIGHT SMALL FINGER TO BE CAUGHT IN PINCH POIN BETWEEN PUNCH & BOTTOM OF DRUM CAUSING LACERATION AND FRACTURE.

EE AND FELLOW WORKER WERE REMOVING BOLT FROM CEMENT LINE FLANGE. EE WAS USING 11/8"BOX END WRENCH WEDGED AGAINST ADJOINING BOLT TO PREVENT BOLT FROM TURNING SO FELLOW EE COULD LOOSEN NUT. WREN CH INJURED WAS HOLDING SLIPPED FROM BOLT HEAD AND PRESSURE BEING APPLIED BY FELLOW WORKER CAUSEDIT TO MOVE SUDDENLY,CATCHING HIS LEFT SMALL FINGER IN PINCH POINT BETWEEN WRENCH & CEMENT LINE.

REMOVING PIPE FROM A PIT USING AN OVERHEAD TROLLEY AND CHAIN FALL. PULLED THE TROLLEY OFF THE MONORAIL CUTTING THE RIGHT HAND INDEX FINGER BELOW THE KNUCKLE WHEN THE CHAIN FALL TRAPPED HAND BE TWEEN IT AND THE BOBCAT BUCKET.

THE EE WAS SAWING A PIECE OF METAL, THE SAW BLADE BROKE AND A PIECE OF IT HIT HIM IN THE ABDOMEN, CAUSING A LACERATION.

INJURED WAS USING 8# SLEDGE HAMMER TO DRIVE ELEVATOR PIN INTO PLACE. HE WAS WORKING IN RESTRICTED AREA AND WHEN HE SWUNG HAMMERIT GLANCE DOFF ELEVATOR DOOR FRAME AND STRUCK HIS LEFT LOWER LE G. MEDICALEXAM ON 7-1-97 REVEALED BRUISED TENDONS.

INJURED WAS REMOVING INSPECTION DOOR FROM FINISHMILL SPEED REDUCER USING BAR AS LEVERAGE. END OFBAR SLIPPED OUT OF PLACE CAUSING WEIGHT OF DOOR TO PUSH BAR AGAINST RIGHT THUMB. MEDICAL EXAMINA TION ELEVEN DAYS LATER REVEALED THUMB HAD BEEN HYPEREXTENDED.

EE WAS HOLDING 1" X 9-1/2' BAR WHILE FELLOW EE STRUCK IT WITH 12# HAMMER TO REMOVE BUILDUP FROM PREHEATER. HAMMER SLIPPED FROM FELLOW EE'S GRASP AND STRUCK EE ON LEFT SIDE OF PLASTIC FACE SHIE DL CAUSING LACERATION AND BRUISES.

EE WAS USING MANUAL CONDUIT BENDER TO BEND CONDUIT. WHEN MAKING HIS FINAL BEND HIS RIGHT ELBOW STRUCK CONDUIT BEING BENT. EE RIGHT ELBOW WAS BRUISED-INJURY WAS REPORTED FOLLOWING DAY & MEDI AL TREATMENT GIVEN 3/25/97

INJURED WAS USING 36" PIPE WRENCH TO ROTATE 16"X11'6" SECTION OF SCREW CONVEYOR TO ALIGN HOLES SO SHEAR PIN COULD BE INSTALLED. WHEN HE MADE SUDDEN THRUST ON WRENCHH HE FELT PAIN IN IS LOWER BACK.

EE WAS TIGHTENING A BOLT ON AN OVERPACK DRUM WITH AN END WRENCH. THE WRENCH SLIPPED OFF THE BOLT & HIT HIM ON THE HEAD ABOVE THE LEFT EYEBROW. THE IMPACT CAUSED A CUT. HE WAS SENT TO THE DOCTO R & RECEIVED 3 STITCHES.

BASED ON AN INTERNAL AUDIT, THIS WAS DETERMINED TO BE A REPORTABLE ACCIDENT.

EE WAS CUTTING UP FIBER DRUMS TO BE PROCESSED WITH UTILITY KNIFE. THE KNIFE SLIPPED AND CUT HIS RIGHT LEG NEAR THE KNEE.

EMPLOYEE HAD 2- 18'X 1 1/4" CABLE SLINGS AND 1- 6 TON COME ALONG HOOKED TO A FRAME THAT WEIGHED 15 TONS. PICKED UP ON LOAD AND CHAIN ON COME ALONG BROKE AND BLOCK OR CHAIN CUT THE EMPLOYEES LE FT HAND PALM.

INJURED WAS REMOVING 3/8" X 24" X 54" SECTION OF INCLINED CLINKER CHUTE COVER BY USING CUTTING TORCH TO REMOVE BOLTS. AFTER REMOVING LAST BOLT HE PRYED COVER OFF WITH SCREWDRIVER CAUSING IT TO SLIDE DOWN INCLINED CHUTE TOWARD HIM. WHEN HE SAW DIRECTION COVER WAS MOVING HE JUMPED OFF LADDER HE WAS WORKING FROM TO FLOOR 45" BELOW AND FRACTURED A SMALL BONE IN HIS LEFT FOOT ON IMPACT.

THE EE HAD A 2"X6" PIECE OF WOOD BETWEEN A HYDRAULIC JACK AND THE FRAM OF A MOTOR. HE REACHED OVER THE GUARD TO TIGHTEN THE BASE BOLT ON THE NOTOR FRAME. THE WOOD BROKE AND HIT HIM IN THE FACE .

EE WAS CLOSING RAIL CAR BOTTOMS, PRY BAR ROLLED OVER MASHING RIGHT LITTLE LITTLE FINGER BETWEEN THE GROUND AND THE PRY BAR CAUSING A FRACTURE.

INJURED WAS USING PRY BAR TO REMOVE BELT ROLLER WHILE STANDING ON CONDUIT. THE BAR SLIPPED CAUSING HIS FOOT TO SHIFT ON CONDUIT. EMPLOYEE FELL FORWARD AND SUDDEN MOVEMENT OF HIS FOOT CAUSED A CHIP FRACTURE (4X7 MILLIMETER) OF LEFT FOOT.

HOLDING CONDUIT IN LEFT HAND WHILE CUTTING LFEXIBLE CONDUIT WITH POCKET KNIFE IN RT HAND THE KNIFE SLIPPED & CUT SECOND KNUCKLE ON LEFT FOREFINGER

WHILE CUTTING A SKIRTBOARD FOR 1 5.1-2 5 BELT THE KNIFE SLIPPED & CUT RT FOREARM

FELLOW EE WAS SUING SLEDGE HAMMER TO DRIVE OUT ROLLER MILL LINERS THE HAMMER GLANCED OFF THE LINER AND STRUCK INJURED S LEFT KNEE. LEFT KNEE BRUISED.

CUT PALM OF HAND WHILE STRIPPING THE INSULATION FROM AN ELECTRICAL CABLE. KNIFE SLIPPED OUT OF THE MATERIAL BEING CUT AND STRUCK HIS PALM.

FOREING OBJECT IMBEDDED IN LEFT HAND WITH LATER INFECTION ON 3-9-94 INJURED WAS IN PLANT TRUCK SHOP AREA WHEN A FOREIGN OBJEC TFLEW FROM HAMMER FELLOW WORKER WAS STRICKING LOADER BUCKE TOOTH W ITH MEDICAL ATTENTION REQUIRED ON 4-6-94 TO REMOVE OBJECT AND TREATMENT FOR INFECTION.

INJURED WAS USING A 20# SLEDGE HAMMER TO STRIKE BAR BEING USED TO REMOVE BUILD-UP FROM PREHEATER. LOCATION FO BUILD-UP REQUIRED INJURED TO HAVE TO SWING HAMMER IN UPWARD MOTION CAUSING STRAIN OF RIGHT TESTIS.

INSTALLING STAMBLE TAIL SHAFT ASSEMBLY TWO RATCHETS WERE USED TO SLIDE ASSEMBLY INTO POSITION. ONCE POSITONED TO BE INSTALLED ONE RATCHET WAS REMOVED AND TENSION WAS BEING REMOVED FROM SECOND RATCHET FALL AND WHEN ALL TENSION FROM 2ND RATCHET WAS REMOVED SHAFT ASSEBLY ROTATED AWAY FROM STABLER CATCHING INJURED LEFT HAND BETWEEN CONVEYOR OF SHAFT ASSEMBLY AND CONCRETE WALL CAUSING

INJURED WAS HOLDING PIECE OF BRASS BEING STRUCK BY COWORKER WITH SLEDGE HAMMER TO DRIVE BUSHING ONTO SHAFT. COWORKER MISSED THE BRASS ROD AND STRUCK EE ON BACK OF RT. HAND. MEDICAL EXAM REVEAL ED SEVERE BRUISE TO BACK OF RT. HAND.

INJURED AND CO WORKER WERE REMOVING STAMLER SPROCKET. WHEN SPROCKET CAME OFF SHAFT IT DROPPED TO PLATFORM AND INJURED LEFT HAND WAS CAUGHT IN PINCH POINT BETWEEN SPROCKET AND BRACE CAUSING HIS LEFT SMALL FINGER TO BE LACERATED AND FRACTURED

INJURED STRUCK BUSHING WITH HAMMER TO REMOVE IT FROM SHAFT. SMALL PIECE OF METAL FLEW AND BECAME EMBEDDED IN HIS THROAT AND HAD TO BE SURGICALLY REMOVED.

INJURED WAS USING 10# SLEDGE HAMMER TO STRIKED END OF IRON BAR TO REMOVE BUILDUP FROM PREHEATER RISER DUCT. HE FELT A BURNING SENSATION IN MIDDLE OF ABDOMEN AND MEDICAL EXAMINATION REVEALED A VENTRAL HERNIA.

INJURED USED CHAIN LINK TO STRIKE FLOP GATE HAND ON COAL ELEVATOR WHEN HE STRUCK HANDLE HIS LEFT RING FINGER STRUCK AGAINST CORNER OF ELEVATOR CAUSING LACERATION AND FRACTURE.

INJURED WAS USING METAL BAR TO CLEAN STONE DRYER BOVNON CONE THE BAR SLIPPED CAUSING HIS LEFT HAND TO STRIKE SHARPE METAL BACK OF HAND LACERATED REQUIRING FOUR STITCHES.

EMPLOYEE WAS LOSSENING LUG NUTS ON WHEEL OF MACK DUMP TRUCK USING LUG WRENCH. LEUG LOOSENED CAUSING EMLOYEE OT LOSE BALANCE SHIFTINGALL OF HIS WEIGHT TO LEFT LEG. WAS SEEN BY DR ON 7-29-93 F OR HYPEREXTENSION OF LEFT THIGH.

USING A ROPE TO PULL AND LIFT A METOR. TWISTED WRONG AND HURT BACK AND STRAINED LEFT LEG.

INJURED WAS TIGHTENING DRILL BIT WITH CHUCK KEY. KEY SLIPPED CAUSING INJURED TO STRIKE HAND AGAINST SHARP METAL CAUSING LACERATION TO BACK OF RIGHT HAND.

INJ USING A CHISEL AND HAMMER TO REMOVED HARDENED CEMENT. PIECE OF CHISEL FLEW OFF AND ENTERED LEFT LOWER. LATER INFECTION REQUIRED MEDICAL ATTENTION 11-23-92.

INJURED WAS USING RATCHET TO REMOVE METAL SLIDE FROM GYPSUM HOPPER. SLIDE FELL ONTO BOTH LEGS CAUSING SEVERE BRUISE TO RIGHT LOWER LEG.

INJURED WAS USING RATCHET WITH PIPE FOR ADDITIONAL LEVERAFGE TO TIGHTEN BOLTS ON VALVE. THE RATCHED BROKE CAUSING INJURED TO FALL BACKWARDS RESULTING IN STRAINED MUSCLES IN LEFT SHOULDER. INJU RED 3-16-92 MEDICAL ATTENTION 3-27-92.

INJURED WAS HOLDING SHAFT WHILE FELLOW EE WAS DRIVING BEARNING OFF WITH HAMMER. SMALL PIECE OF METAL FLEW OFF BEARING RACE AND ENTERED HIS RIGHT FOREARM.

INJURED WAS WORKING INSIDE NO. 5 KILN AND A PIECE OF COATING FELL ONTO HIS LEFT SHOULDER CAUSING BRUISES.

INJURED WAS USING UTILITY KNIFE TO CUT RUBBER FUEL LINE HOSE. KNIFE SLIPPED WHEN HOSE WAS CUT CAUSING HIS LEFT INDEX FINGER TO BE LACERATED.

WHILE REPAIRING SPEED REDUCER INJURED PICKED UP 24" COMBINATION WRENCH WITH HIS LEFT HAND. HE FELT PAIN IN LEFT FOREARM. LATER MEDICAL EXAMINATION REVEALED A DAMAGED TENDON.

INJURED WAS USING ADJUSTABLE WRENCH TO TIGHTEN BOLTS ON ENTRANCE GATE WHICH WAS BEING INSTALLED. HIS RIGHT LARGE FINGER STRUCK BARBED WIRE CAUSING LACERATION REQUIRING THREE (3) STITCHES.

INJURED WAS STRIKING STAMLER PICK WITH HAMMER WHEN SMALL PIECE OF METAL BROKE OFF AND ENTERED HIS LEFT SHOULDER.

INJURED WAS USING PIPE WRENCH WITH A 4 FT HANDLE EXTENSION TO REMOVE THE THERMOCOUPLE WELL FROM THIRD STAGE OF PRESHEATER. WRENCH SLIPPED CAUSING THE PIPE TO STRIKE HIS RIGHT SHOULDER AND NECK RESULTING IN BRUISED RT SHOULDER AND NECK.

WHILE ATTEMTPING TO TIGHTEN CONDUIT FITTING WITH PLIERS ARM SLIPPED AND STRUCK EDGE OF JUNCTION BOX.