Buscar en el registro

While working on a conveyor belt repair the employee was using a utility knife, the knife slipped and the employee received a cut to his hand. The cut required 5 stitches.

Struck left thumb with hammer. Three stitches on thumb.

Striking tooth retainer with a hammer to secure tooth on 988B loader bucket. A metal sliver broke off of tooth striking him in lower left front of neck. Required minor first aid to stop bleeding. He finished shift and went to doctor, X-ray shows metal inbedded in muscle. doctor chose to not remove

Employee was installing screens in a confined area and struck his left arm with a 3# hammer.

While repairing a guard on a conveyor, the socket slipped off the bolt and the ratchet struck employee's upper lip pushing tooth back.

EE was using 16 lb. hammer on pipe and missed the lip on the 18" pipe. EE caught his finger between the handle of the hammer and the edge of pipe. The handle then swung around after hitting the pipe and hit EE's left side of torso. Injuries resulted in a laceration to the right forefinger and contusion to left side torso.

Employee cut left thumb with utility knife while removing electrical tape from lugs in junction box of electric motor. Received 4 stitches in emergency room. During follow up doctors appointment, doctor applied more stitches internally. No work restrictions.

Employee was cutting conveyor belt with razor knife when the knife slipped and cut his leg above the left knee

INSTALLING NEW SCREENS ON S2 - CUTTING TABS OFF SCREEN TO INSTALL - KNIFE SLIPPED CUTTING LEG JUST ABOVE KNEE CAP.

EE WAS HAMMERING FLOXCOS OUT OF A BELT WHEN PIECES OF HAMMER IMPEDED INTO THE TOP OF MY LEFT HAND.

WHILE SWINGING A HAMMER, THE EMPLOYEE SLIPPED, MOVING THE HAMMER OFF COURSE AND SUBSEQUENTLY STRIKING A COWORKER ON THE LEFT HAND.

EE WAS LYING ON HIS BACK LOOSENING BOLTS ON THE TANDEM AXLES OF A TRUCK. DUST/METAL PARTICLES FELL INTO HIS EYE.

2 EMPLOYEES WERE MOVING A MOTOR ASSISTING WITH PRY BAR. PRY BAR SLIPPED HITTING EMPLOYEE ON CHIN, BREAKING TOOTH AT GUM LINE.

EMPLOYEE SLIPPED WHILE CUTTING BELT WITH A KNIFE.

EE WAS USING WRENCH, WRENCH SLIPPED LIFTING HIM IN THE KNEE.

EMPLOYEE WAS ATTEMPTING TO LOOSEN BOLTS ON A BEARING SEAL PLATE WHEN THE BOLT BROKE LOOSE, SMASHING FINGER AGAINST STEEL, CUTTING FINGER BONES.

CUTTING RUBBER WITH RAZOR KNIFE WHEN RUBBER SLIPPED & KNIFE HIT & CUT LEFT FINGER

WHILE SWINGING 20 LB HAMMER PULLED MUSCLE IN BACK.

BAD SEAL ON AIR PUMP. EE LOOSENED AN AIR LINE TO FIX AND THE AIR LINE SLIPPED OUT AND HIT HIM IN THE CHIN AND TEETH.

EE WAS TIGHTENING DOWN RETAINER BOLTS ON SCREENS & RATCHET BROKE WHICH CAUSED EE TO SLIP AND OUTSIDE OF RIGHT ELBOW CAME DOWN ON TOP OF ANOTHER BOLT. ELBOW TENDONITIS NOT REPORTED TO EMPLOYER UNTIL 5-18.

SCREEN DECK OVERLOAD, PLUG CHUTE, ROCK FELL.

EMPLOYEE WAS ATTEMPTING TO CUT A THICK BELT WITH A RAZOR KNIFE WHEN HE CUT HIS THIGH.

THE EMLOYEE WAS ATTEMTPING TO FREE UP A WIRE COME-A-LONG WITH A CHAIN COME-A-LONG WHEN THE CLAMP BROKE CAUSING THE COME-A-LONG TO HIT THE EMPLOYEE IN THE FACE. THE EMPLLOYEE SUFFERED FROM CUT S TO HIS HEAD AND NOSE AND CONCUSSION.

EMPLOYEE WAS OEPRATING A WIRE COME-A-LONG WHEN HE TWISTED HIS BACK CAUSING BACK STRAIN.

SLIPPED WHIILE USING RAZOR KNIFE, CUT LEG.

WAS KNOCKING RACE FROM HUB AND STRUCK FLOOR CUTTING THUMB.

LEFT LEG CUT WHILE CUTTIN PIECE O RUBBER. REQUIRED 3 STITCHES AT LOCAL DOCTOR OFFICE.

EMPLOYEE WAS KNEELING AND CUTTING RUBBER WITH A UTILITY KNOFE. THE KNIFE SLIPPED AND CUT HIS THIGH.

CRUSHER REPAIR & PULLING WRENCES, NORMAL WORK PROCEDURES.

WHILE CHANGING TEETH ON THE DREDGE BUCKET, A PIECE OF METAL BROKE OFF AND HIT EE IN THE LEFT EYE.

STRAINED LEFT SHOULDER.

WRENCH SLIPPED OFF BOLT. RIGHT HAND SLAMMED DOWN ONTO SHARP EDGE OF PULLEY CAUGING RIGHT 5TH FINGER TO BE SEVERELY CUT AND SMASHED.

WHILE WORKING ON CRUSHER PARTS, HAND SLIPPED OFF PRY BAR, SLID ACROSS SHARP RIM AND CUT INTO FINGRS.

CUTTING PATCH FOR BELT BEING REPAIRED. RAZOR KNIFE HIT A ROCK AND CAME OUT OF BELTING AND CUT INTO LEG. CUT RIGHT LEG ABOVE THE KNEE, REQUIRING 2 STICHES ABOVE THE RIGHT KNEE.

WHILE EMPLOYEE WAS CUTTING A PIECE OF PAPER, HIS KNIFE SLIPPED AND CUT LEFT UPPER LEG.

23977ED WITH KNIFE & CUT FINGER.

CUTTING SKIRT BOARD RUBBER WITH RAZOR KNIFE.SLIPPED AND CUT RIGHT LEG ABOVE KNEE.

BACK WAS SORE AFTER DOING MAINTENANCE ON SCREEN AT CRUSHING PLANT. TWO DAYS LATER HE REPORTED TO DR. AND WAS TOLD TO WORK LIGHT DUTY FOR ONE WEEK. INSTEAD OF LIGHT DUTY, HE CHOSE TO MISS WORK FOR REMAINDER OF WEEK.

EMPLOYEE WAS WIRE BRUSHING PIPE WHEN A PIECE OF SAND GOT INTO THE LEFT EYE.

WORKER WAS CUTTING RUBBER CONVEYOR BELT WITH LEFT AHND WHEN RAZOR CUT MIDDLE FINGER.

APPARANTLY IN FEB 1989 I NAME WAS STRUCK IN ARM BY MECHANIC. SWINGING A HAMMER AT TIME DID NOT BOLTER HIM ON 6-14-89 WHILE SHOVELING ROCK AT PLANT ARM TIGHTENED UP ON HIM. HE WENT TO DR WHO AD VISED LIGHT DUTY FOR 1 -2 WEEKS.

I.NME CONSTRUCTING PLACE TO GRIND DRILL BITS & STORE DRILL PARTS.NAILING TWO 2 X 4S TOGETHER HOLDING THEM WITH LEFT HAND AND HAMMERING WITH RIGHT.ON BACK SWING HE HIT A STUD IN BUILDING THROWI NG ARM OFF CAUSING HIM TO HIT LEFT THUMB WITH HAMMER.