Buscar en el registro

RATTLING BOLTS ON THE IRON ON TOP & TWISTED BACK

CREW WAS CLEANING MATERIAL FROM #2 CLINKER COOLER GRATES. A CHUNK OF BRICK/CASTIBLE FELL OFF WALL OF KILN HOOD AND HIT EMPLOYEE ON HARD HAT.

EE WAS HITTING SEPARATOR WITH 12 LB HAMMER SEPARATOR WAS PLUGGED.

EE WAS ATTEMPTING TO CHANGE POSITION OF CLAM SHELL GET, PRYING ON GATE WITH BAR. PINCHED RT INDEX FINGER BETWEEN BAR AND EDGE OF STEEL SKIRTING.

EMPLOYEE WAS POKING A CHUNK OF CEMENT INTO MILL WITH BAR AND THE BAR GOT CAUGHT AND STRUCK THE EMPLOYEE ON THE HAND.

EE WAS USING A SPIKE HAMMER TO INSTALL NEW RAIL IN TRACKS. HAD PREVIOUSLY INJURED SAME ARM/ELBOW. THIS TASK CAUSED NEW INJURY.

EE WAS TIGHTENING BOLTS WITH A WRENCH & FELT A PULL IN HIS BACK [PULLED MUSCLE]. [INCIDENT WAS NOT REPORTED TO SUPERVISOR UNTIL 4/22/98].

WHILE CHANGING HIS SHOES, EMPLOYEE USED A POCKETKNIFE TO OPEN EYELET ON SHOES. KNIFE BLADE COLLAPSED AND EMPLOYEE WAS CUT ON RIGHT MIDDLE FINGER.

EE DROPPED 30" RATCHET EXTENSION ON RIGHT FOOT [JUST BEYOND STEEL TOE CAP].

EE WAS STRUCK ON LEG BY A RAILROAD TIE RESTRAINT THAT HAD BEEN KNOCKED LOOSE BY ANOTHER LABORER. RE ITEM 27: EE WAS PREVIOUSLY EXPERIENCED AT ANOTHER PLANT.

EMPLOYEE HIT FINGER WITH BAR TRYING TO OPEN A RAILCAR.

WHILE CLEANING PREHEATER TOWER, EMPLOYEE CAUGHT FINGER BETWEEN BAR AND DOOR FRAME.

EMP USED FORCE TO DISLODGE SPUD BAR THAT WAS WEDGED INTO HARD BUILD-UP ON INSIDE OF PREHEATER TOWER.

EE APPARENTLY RECEIVED INJURY ON 8-9-95 BUT DID NOT REPORT IT AT THAT TIME. SHE WENT TO DR ON 8-25-95 AND WAS SUBSEQENTLY PUT ON MODIFIED DUTY. INJURED WHEN SHE HAD TO UNPLUG AN AIRSLIDE BY HI TTING IT WITH A HAMMER.

EE WAS PULLING ON CHAIN TO REMOVE A BARREL FROM THE KILN (1-4-95). EE DID NOT GO TO DR UNTIL 1-9-95, DR THEN PLACED EE ON MODIFIED DUTY.

EMPLOYEE WAS ATTEMPTING TO FREE BUCKET. BAR HE WAS USING SLIPPED & EMPLOYEE STATES HE STRAINED HIS BACK.

INJURED WS CLOSING RAILCAR DOORS WITH BAR AND STRAINED RIB MUCLES. INJURY WAS REPORTED 1-20-92, BUT OCCURRED ON 1-18-92.

INJ WAS POKING PREHEATER TOWER WHEN MATERIAL FLUSHED BACK. INJ RECEIVED BURN ON FACE. EMPL HAD ON PROTECTIVE QUIPMENT WHEN ACCIDENT OCCURRED.

INJURED EMPLOYEE WAS ATTEMPTING TO REMOVE A WEDGED JACKHAMMER BIT BY HITTING IT WITH A HAMMER. A PIECE OF METAL BROKE OFF AND HIT THE EMPLOYEE IN THE CHIN. THE ACCIDENT OCCURRED ON 01-29-91. O N 2-28-91, THE EMPLOYEE REQUESTED TO GO TO SEE A DR. A SMALL PIECE OF METAL WAS REMOVED FROM HIS CHIN.

IJURED WAS KNOCKING DOWN BRICK IN NO 1 KILN INJURED WAS WORKING FROM A 10FT LADDER USING A BRICK BAR THE BAR SLIPPED & INJURED FELL SIX FT ONTO KILN BRICK

USING FT TO DRIVE SHOVEL IN MATERIAL BOUNCED BACK AT HIM BANGED INTO LATCH ONKILN DOOR

WRENCHING COLD END OF K - 1 COOLER PIPE WRENCH FLIPPED BACK AND CLIPPED BACK SIDE OF HEAD WRENCHED L LHAND AND AR M

INJURED WAS PAINTING & FELT PAIN IN RIGHT SHOULDER. NOT REPORTED TO SUPERVISOR UNTIL 11/22/89.

INJ PULLING ON PRY BAR SMASHED HAND INJ FOURTH FIFTH FINGERS

INJURED WAS WORKING IN #1 COOLER, CLEANING OUT OLD BRICK AND DUST WHEN DUST WAS BLOWN INTO EYE. INJURED REPORTED INJURY, BUT DIDN'T SEEK FIRST AID OR TREATMENT OF ANY KIND UNTIL 6-14-89.

EMPL WAS CLEANING IN THE CRUSHER BUILDING THE REPETITIVE OF SHOVELING AND APPLYING PRESSURE TO THE SHOVEL WITH HIS FOOT AGRAVATED HIS KNEE

LARGE CHUNK OF MATERIAL FELL ON BAR USED TO POKE PREHEATER THUS ACTING AS A CANTELEVER FLIPPING INJURED ONTO HIS BACK

INJURED WAS WORKING ON A COOLER GRATE USING A PRY BAR PRY BAR SLIPPED INJURED TWISTED AND FELL

INJURED WAS PKING PREHEATER WHIILE USING AN IRON BAR POSITIVE PRESSURE BLEW HOT DUST ONTO HIS FIRE RETARDENT JACKE DEFELCTING THE DUST UP AND UNDER HIS FACE SHIELD

WHILE UNLOADING A RAIL CAR OF COAL, THE PRY BAR USED TO OPEN BOTTOM DOORS SPRANG BACK AND HIT UNJURED'S HEAD.

INJURED OPENED INSPECTION DOOR ON FEED SHELF OF PREHEATER.WHILE POKING WITH A BAR,HOT MATERIAL BLEW BACK HITTING INJURED IN FACE,NECK AND CHEST.

WHILE BRICKING A KILN, INJURED HIT HIS FINGER WITH A HAMMER TRYING TO DRIVE SHIMS.

INJURED WAS USING PRYBAR TO OPEN BOTTOM DUMPT DOOR ON RAIL CAR. BAR SLIPPED & HIT HIS HAND.

INJURED WAS USI3G A PRYBAR TO RELEASE BOTTOM DUMP DOORS ON A RAIL CAR.DOOT RELEADED SUDDENLY CAUSING HIS FINGER TO BE CAUGHT BETWEEN PRYBAR AND HAND RAILING OF THE TRESSEL.

INJURED WAS OPE3ING A BOTTOM DUMP DOOR OF A RAIL CAR WITH A PRY BAR. BAR SLIPPED, HIT INJURED S FOOT AND HE TURNED HIS ANKLE IN AVOIDANCE.

INJURED OVER EX9RTED HIMSELF ATTEMPTING TO OPEN A BOTTOM DOOR OF RAIL CAR WITH A PRY BAR SAW DOCOCTOR 9 4 86

INJ WAS USING A3STEEL CHISEL TO CHIP HARDENED MATERIAL HE STRUCK THE CHISEL WITH A HAMMER AND A STEEL CHIP FLEW INTO HIS LEFT ARM

WHILE ATTEMPTING TO OPEN A BOTTOM DUMP DOOR ON A RAILCAR INJURED WAS HIT IN THE MOUTH BECAUSE HIS PRYBAR SLIPPED.

INJ WAS UNLOADING COAL CARS HE LOST HIS GRIP ON THE IRON BAR USED FOR OPENING AND CLOSING DOORS THE PRY BAR HIT HIS LEFT HAND

WHILE CHANGING BLOCKS IN THE SEPARATORS INJ WAS REQUIRED T BE IN AN UNUSUAL POSITION FOR PULLING HARD TO LOOSEN BOLTS

CUTTING TILE WITH A RAZOR BLADE LOST CONTROL AND LACERATED RIGHT THUMB REQUIRING SUTURES.

INJURED WORKED ON SCREW CONVEYOR REQUIRING BENDING AND KNEELING AS HE GOT UP FELT SHARP PAINS IN LOWER BACK.

WHILE TIGHTENING BOLT THE WRENCH SLIPPED AND I NJURED HIT HIS HAND ON PIECE OF GLASS

INJURED WAS STRIKING A METAL CHISEL WHICH HAD A MUSHROOM HEAD STEEL SPLINTER LODGED IN LEFT HAND