Buscar en el registro

EMPLOYEE WAS HELPING DRIVE A CRUSHER BEARING HOUSING WITH A HAMMER AND WOODEN BOARD. WHEN THE BOARD WAS STRUCK WITH THE HAMMER, SOMETHING FLEW UP AND STRUCK HIS RIGHT EYE CAUSING A PUNCTURE.

2 EMPLOYEE WERE REMOVING BUCKET TEETH FFOM A 988B LOADER BUCKET. INJURED HAD STEPPED AWAY FROM THE WORK AREA AND WAS PUTTING AWAY TOOLS. THE TOOTH PIN WAS STRUCK AND ANOTHER EE HIT THE PIN WIT H A SLEDGE HAMMER. A FRAGMENT FROM THE PIN FLEW OUT AND STRUCK INJURED. THE PIECE OF STEEL WAS REMOVED BY DR. ON 6-12-98. DR. CUT SKIN REQUIRING 6 STITCHES TO CLOSE.

CREW WAS INSATLLING JAW IN CRUSHER. EE WAS PUTTING WEDGE BLOCK IN THAT HOLDS JAW DIE IN. TIMBER WAS BEING USED TO HOLD JAW DIE FROM LAYING OVER. TIMBER SLIPPED JAW DIE LAID OVER.

WAS CUTTING A PIECE OF CONVEYOR BELT. HE WAS PULLING THE KNIFE TOWARD HIMSELF WHEN IT SLIPPED & CUT HIS LEG.

OPERATOR WAS ASSISTING MECHANIC IN CHANGING BUCKET TEETH. HE WAS HOLDING LOCK PIN AND MECHANIC WAS SLUGGING TOOTH ONTO SHANK. A PIECE OF METAL BROKE OFF TOOTH AND IMPACTED EE'S ARM CAUSING LAC ERATION.

MECHANIC WAS REMOVING BELLY PAN FRAM LOADER. MECHANIC WAS LOOSENING LAST BOLT, THE BOLT BROKE AND BELLY PAN FELL, CRUSHING HIS 4TH DIGIT LEFT HAND.

A BIG ROCK WAS HUNG IN THE CHUTE OVER THE 489 CRUSHER AT THE PORTABLE PLANT. INJURED EE USED A 5' PRYBAR TO TRY TO DISLODGE THE ROCK. THE PRYBAR SLIPPED OFF OF THE ROCK AND HIT THE EE IN THE M OUTH. EE S MOUTH WAS KINNED AND A JAW TOOTH WAS BROKEN OFF BY IMPACT. TOOTH HAD TO BE EXTRACTED BY DENTIST LATER THAT NIGHT.

EE WAS REMOVING SCREEN DECK SIDE RAIL BOLTS WITH A HAMMER HE WAS USING ANOTHER BOLT AS A PUNCH HAMMER HIT BOLT A GLANCING BLOW & IMPACTED HIS FINGER AGAINST SCREEN SIDE PANEL

EE WAS TIGHTENING HOSE CLAMP ON WATER HOSE WITH A SCREWDRIVER AND SCREWDRIVER SLIPPED OUT OF SLOT AND RIGHT HAND HIT SHARP EDGE OF CLAMP CUTTING RIGHT INDEX FINGER.

OPERATOR HAD LEFT LOADER TO CLEAR JAMMED CHUTE. HE WAS USING PRY BAR TO CLEAR DISCARGE CHUTE. HE RAISED THE BAR SEVERAL TIME STO CLEAR OBSTRUCTION. AFTER SEVERAL TRIES, BAR STRUCK OVERHEAD STEEL STRUCTURE, DEFLECTED ANAD IMPACTING OPERATORS HAND AND WRIST.

WORKER WAS REMOVING SPLIT BOLT FROM CRUSHER HEAD BY HITTING A SLUGGING WRENCH WITH A SLEDGE HAMMER. TWO DAYS LATER WORKER REPORTED LOWER BACK PAIN ANDMUSCLE SPASM.

EMPLOYEE CUTTING STRIPS (BUCKER UP STRIPS) ON TOP DECK SCREEN WHEN BODY SHIFTED CAUSING RAZOR KNIFE TO CUT FINGER.

COWORKER HAD SHUT OFF AIR VALVEWS IN CAB AND AT TANK. GAUGES SHOWED ZERO AIR PRESSURE. EE THOUGHT IT SAFE TO WORK ON BLOW TUBE AREA WHICH WAS CLOGGED. HE YSE A SCREWDRIVER TO DISLODGE IT. WHEN HE BROKE THROUGH, THE AIR THAT WAS TRAPPED BETWEEN THE CLOSED VALVE AND THE RESTRICTED AREA WAS RELEASED & BLEW THE MATERIAL ONTO EE. PUNCTURE WOUNDS RESULTED FROM THE MATERIAL.

EE WAS DISLODGING PIECE OF STONE HUNG IN PRIMARY CRUSHER FEEDER USING A CABLE AND PIECE OF PIPE. EE CUT LOWER LEFT HAND ON PIECE OF PIPE. REQUIRED SIX STITCHES TO CLOSE WOUND.

WHEN TIGHTENING WEDGES ON A 66 FC CRUSHER, THE EMPLOYEE STRUCK A WEDGE WITH A #10 SLEDGE HAMMER WHICH BOUNCED BACK AND HIT HIM ON THE LEFT SIDE OF HIS RIBS.

EMPLOYEE STATES HE WAS CHANGING PIECE OF PUNCH PLATE USING A CHAIN HOIST PLA TE WAS BEING HELD BY HOIST EMPLOYEE WAS CLEANING DEBRIS FROM UNDER PLATE WHEN HIS SHOULDER ACCIDENTLY STRUCK HOIST RELEASING PLATE CAUSING IT TO COME DOWN ON HIS LEFT HAND

CRUSHING RIP RAP STONE,EMPL REMOVING JAM ROCK FROM UNDER CRUSHER WITH STEEL HOOK.ROCK UNLODGED ,HOOK HIT BELT CAUSING HAND TO GET CAUGHT BETWEEN HOOK & FRAME OF CRUSHER.BRUISED & LACERATED LEF T HAND.

EMPLOYEE STATES HE WAS DISLODGING A ROCK FROM THE CHUTE UNDER THE JAW CRUSHER WITH A PRY BAR. A ROCK FELL ONTO HIS HAND CAUSING HIS HAND TO BE MASHED BETWEEN THE ROCKS.

EMPLOYEE USING IRON WEDGE TO UNHANG ROCK IN JAW CRUSHER. WEDGE SLIPPED CAUSING EMPLOYEE TO FALL BACKWARDS ON STEEL PLATFORM.

EMPLOYEE STATES HE WAS TRYING TO PULL A CHEEK PLATE UP AT THE JAW CRUSHER WITH A CHAIN HOIST TO PUT A BOLT IN IT THE CHAIN SLIPPED & THE HOOK HIT THE EMPLOYEE IN THE FOREHEAD

EMPL REMVOING TANSMISSION FROM HEADPULLEY ASSEMBLY HAMMERING ON SHAFT PIECE OF STEEL FLEW STRIKING EMPL IN RIGHT UPPER THIGH.

CUTTING CONVEY BELT WITH KNIFE SLIPPED CUTTING R. LEG ABOVE KNEE

I.NAME WAS CUTTING A SIX FOOT PIECE OF CONVEYOR BELT TO MAKE A LIP FOR A SAND SCREEN. THE KNIFE HE WAS USING SLIPPED AND STRUCK HIS LEFT HAND ON THE BACK AT THE BOTTOM OF THE THUMB TAKEN 5 STI TCHES TO CLOSE.

EMPLOYEE STATES HE WAS USING A 20# SLEDGEHAMMER TO BEAT A BUSHING ON A CHAIN DRIVE WORKING OVER HIS HEAD REPEATEDLY STRIKING THE BUSHIUNG AND CAUSING SORENESS IN HIS NECK AND CHEST.EMPLOYEE CA ME BACK TO WORK ON SUNDAY 01-29-89 ON SAME JOB.

USING 4 FT. PIPE ON END OF CAHIN BINDER. BINDER SNAPED BACK CAUSING PIPE TO STRIKE HIM ON HEAD.

W NAME HAD PUT A STEEL WEDGE IN THE JAW TO LOOSEN AN OVERRSIZE ROCK I NAME WAS TRYING TO HOIST THE ROCK UP WHILE W NAME WAS BUMPING THE ROCK WITH THE WEDGE A PIECE OF STEEL FLEW OFF OF THE WE DGE AND HIT I NAME IN THE R SIDE OF HIS FACE IMBEDDING ITSELF ABOVE HIS TOP LIP AND UNDER HIS NOSE