Buscar en el registro

EMPLOYEE WAS HELPING DRIVE A CRUSHER BEARING HOUSING WITH A HAMMER AND WOODEN BOARD. WHEN THE BOARD WAS STRUCK WITH THE HAMMER, SOMETHING FLEW UP AND STRUCK HIS RIGHT EYE CAUSING A PUNCTURE.

REMOVING METAL FROM CONVEYER AND A ROCK 5" TO 6"DIAMETER FELL FROM ABOVE AND HIT HIS LEFT HAND FRACTURING IT.

EE WORKING ON SCALES (WELDING) MADE STEP WHILE TURNING FELT PAIN IN BACK LOWER BACK STRAIN & INFLAMED NERVES AROUND DISC. 1ST REPORTED ON 6/24/01-(NON REPORTABLE) CONDITION WORSENED ON 7/9/01

EMPLOYEE WAS WALKING UNDER CONVEYER, A ROCK FELLOFF CONVEYER STRIKING HIM IN THE HEAD. HE WAS WEARING PROTECTIVE HEAD GEAR. THE RESULT WAS A LACERATION TO THE HEAD REQUIRING FOUR STITCHES.

EMPLOYEE GETTIN GINTO LOADER, TWISTED RIGHT KNEE.

EE LIFTING SCREENS FOOT SLIPPED CAUSING BACK TO TWIST.

2 EMPLOYEE WERE REMOVING BUCKET TEETH FFOM A 988B LOADER BUCKET. INJURED HAD STEPPED AWAY FROM THE WORK AREA AND WAS PUTTING AWAY TOOLS. THE TOOTH PIN WAS STRUCK AND ANOTHER EE HIT THE PIN WIT H A SLEDGE HAMMER. A FRAGMENT FROM THE PIN FLEW OUT AND STRUCK INJURED. THE PIECE OF STEEL WAS REMOVED BY DR. ON 6-12-98. DR. CUT SKIN REQUIRING 6 STITCHES TO CLOSE.

CREW WAS INSATLLING JAW IN CRUSHER. EE WAS PUTTING WEDGE BLOCK IN THAT HOLDS JAW DIE IN. TIMBER WAS BEING USED TO HOLD JAW DIE FROM LAYING OVER. TIMBER SLIPPED JAW DIE LAID OVER.

EE WAS WAITING TO HOOK SPREADER CABLES TO FEED BOX. WELD BETWEEN BOX & CONE BROKE ALLOWING BOX TO FALL APPROX 18" CAUSING EE TO FALL FROM RAIL OF FEED BOX APPROX 5' TO WALKWAY.

EE WAS WAITING TO HOOK SPREADER CABLES TO FEED BOX. WELD BETWEEN BOX & CONE BROKE ALLOWING BOX TO FALL APPROX 18" CAUSING EE TO FALL FROM RAIL OF FEED BOX APPROX 5' TO WALKWAY.

INJURED EMPLOYEE STATED THAT HE AND TWO OTHER EMPLOYEES WERE LIFTING THE TEST WEIGHT FOR A NEW CONVEYOR SCALE INTO POSITION. INJURED EMPLOYEE TOLD THE OTHER TWO EMPLOYEES TO RELEASE THE TEST W WEIGHT TO HIM TO PLACE IN ITS CRADLE. WHEN THE LOAD WAS RELEASED TO HIM, HIS LEFT THUMB WAS MASHED BETWEEN TEST WEIGHT AND ITS CRADLE.

HE WAS CHECKING EQ NO 5512, 988D FRONT END LOADER FOR A FUEL LEAK. THE OPERATOR WAS ASKED TO REV UP THE ENGINE. RUST EITHER FELL FROM THE EXHAUST SYSTEM OR WAS BLOWN INTO HIS LEFT EYE.

WAS CUTTING A PIECE OF CONVEYOR BELT. HE WAS PULLING THE KNIFE TOWARD HIMSELF WHEN IT SLIPPED & CUT HIS LEG.

DRIVER FATALLY INJURED WHEN TRUCK WAS STRUCK BY TRAIN AT RR CROSSING.

IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.

IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.

IN PROCESS OF DISMANTLING CONVEYOR. CRANE BEING USED WAS SET UP TOO FAR AWAY AND WAS NOT LARGE ENOUGH TO SAFELY SET SECTION BEING REMOVED DOWN. SECTION FELL CAUSING EMP TO FALL.

EMPLOYEE CLEANING TAIL PULLEY ON CONVEYOR WITH WATER HOSE. PRESSURE BLEW WATER, DIRT, GOT BACK INTO HIS EYES.

OPERATOR WAS ASSISTING MECHANIC IN CHANGING BUCKET TEETH. HE WAS HOLDING LOCK PIN AND MECHANIC WAS SLUGGING TOOTH ONTO SHANK. A PIECE OF METAL BROKE OFF TOOTH AND IMPACTED EE'S ARM CAUSING LAC ERATION.

EMP WAS GREASING THE FIELD CONVEYORS AND GOING FROM ONE POINT TO OTHERS, HE TRIPPED OVER HIS FEET OR A ROCK AND FELL. HIS LEFT HAND RECEIVED A 11/2" CUT THAT TOOK 5 STITCHES TO CLOSE.

EE WAS HANDING SCREEN CLOTH PANEL TO MAN ON TOP OF SCREEN. SCREEN SLIPPED AND HIT ANOTHER AND THEN IMPACTED HIS LOWER LEFT LEG CAUSING A LACERATION.

EMPLOYEE HAD REPORTED TO WORK AND WAS IN PROCESS OF OPENING A CABLE GATE WHEN HE SLIP ON ICE AND SNOW AND BROKE HIS LEFT FOOT (FIBULA)

EMPLOYEE WAS GUIDING GREASE HOSE BACK ONTO THE REEL WHEN THE HOSE GAVE A QUICK JERK CAUSING HIS RIGHT HAND TO HIT THE FRAME WHICH CAUSED A FX TO THE 2ND METACARPEL OF THE RIGHT HAND. EMPLOYEE DID NOT REPORT THE ACCIDENT UNTIL 2-1-96. AT THIS TIME TREATMENT WAS MADE.

MECHANIC WAS REMOVING BELLY PAN FRAM LOADER. MECHANIC WAS LOOSENING LAST BOLT, THE BOLT BROKE AND BELLY PAN FELL, CRUSHING HIS 4TH DIGIT LEFT HAND.

EMPLOYEE PERFORMING PREVENTIVE MAINTENANCE CHECK ON HAUL TRUCK, TURNED ANKLE (STEPPED ON ROCK) WHILE GETTING OUT OF TRUCK (SPRAIN) THIS WAS BEFORE LITE & STEPS WERE WET.

MINER WAS GRINDING A SMOOTH EDGE ON A PIECE OF STEEL. HE TOOK ONE HAND OFF GRINDER TO MOVE EXTENSION CORD. ONE HAND WAS NOT ENOUGH TO SUPPORT TOOL. TOOL FELL, SKIPED ACROSS STEEL AND LACERA TED HIS THIGH.

ROCK JAMMED IN 6614 CRUSHER WHEN ROCK BECAME UNLODGED ROCK GOING THRU CRUSHER CAUSED ROCK CHIP TO HIT EMPLOYEE IN SIDE ((UNDER ARM)

YEMPLOYEEWAS HELPING WITH REPAIRS ON THE TOWER #2 SHAKER WHEN A PIECE OF RUST GOT INTO HIS EYE.

EMPLOYEE WAS ATTEMPTING TO GET A PIECE OF 2"X6" LUMBER FROM TEH RACK, BOARD SWUNG UPWARD AND CAUGHT RIGHT INDEX FINGER AGAINST THE TOP OF RACK CAUSING CUT.

SHOP MECHANIC AND DRILL OPERATOR TRAINEE, WERE REPLACING DRILL STEEL. TRAINEE RELEASED DRILL STEEL LOCKING DEVICE TOO QUICKLY, CATCHING EE'S FINGER BETWEEN THE PIECE OF STEEL AND FRAME OF DRIL L.

EE HAD CRAWLED INTO THE FIELD HOPPER TO REMOVE A TREE LIMB THAT WAS STUCK. IN THE PROCESS OF REMOVING THE LIMB, EE SLIPPED AND TWISTED HIS LEFT KNEE AND LEG, CAUSING A SPRAIN TO THE KNEE AND L EG. EE HAD PREVIOUSLY INJURED THREE WEEKS PRIOR , IN AN AUTO ACCIDENT.

A BIG ROCK WAS HUNG IN THE CHUTE OVER THE 489 CRUSHER AT THE PORTABLE PLANT. INJURED EE USED A 5' PRYBAR TO TRY TO DISLODGE THE ROCK. THE PRYBAR SLIPPED OFF OF THE ROCK AND HIT THE EE IN THE M OUTH. EE S MOUTH WAS KINNED AND A JAW TOOTH WAS BROKEN OFF BY IMPACT. TOOTH HAD TO BE EXTRACTED BY DENTIST LATER THAT NIGHT.

EE WAS REMOVING SCREEN DECK SIDE RAIL BOLTS WITH A HAMMER HE WAS USING ANOTHER BOLT AS A PUNCH HAMMER HIT BOLT A GLANCING BLOW & IMPACTED HIS FINGER AGAINST SCREEN SIDE PANEL

EE WAS PREPARING TO INSTALL BELT CLAMPS IN BELT. CLIMBED ACROSS CONVEYOR TO OPPOSITE SIDE OF CATWALK. TRIED TO PUSHC A BOARD UNDER THE BELT. LOST HIS FOOTING AND FELL TO THE GROUND. EE WAS NOT WEARING A SAFETY LINE & BELT AND WAS NOT ON THE CATWALK AS TRAINED & INSTRUCTED. EE BROKE LEFT TIBIA IN SEVERAL PLACES REQUIRING HOSPITALIZATION & SURGERY TO REPAIR INJURY.

EE WAS IN FEEDER BOX CUTTING OUT OLD STEEL. HE DID NOT KNOW WHERE THE TRASH GOT IN HIS EYE. HIS EYE STARTED BURNING WENT TO OFFICE OFFICE MANAGER WASHED TRASH OUT OF HIS EYE. EYE WAS STILL IRR ITATED SO HE WENT TO URGENT C. EYE WAS SCRATCHED

EE WAS TIGHTENING HOSE CLAMP ON WATER HOSE WITH A SCREWDRIVER AND SCREWDRIVER SLIPPED OUT OF SLOT AND RIGHT HAND HIT SHARP EDGE OF CLAMP CUTTING RIGHT INDEX FINGER.

OPERATOR HAD LEFT LOADER TO CLEAR JAMMED CHUTE. HE WAS USING PRY BAR TO CLEAR DISCARGE CHUTE. HE RAISED THE BAR SEVERAL TIME STO CLEAR OBSTRUCTION. AFTER SEVERAL TRIES, BAR STRUCK OVERHEAD STEEL STRUCTURE, DEFLECTED ANAD IMPACTING OPERATORS HAND AND WRIST.

EMPLOYEE STEPPED ON A COVER ON THE WALKWAY BEHIND SCREEN #03563 TO CHECK THE SCREEN FOR HOLES THE COVER WAS NOT BOLTED DOWN THE COVER TILTED & THE EMPLOYEES LEFT LEG WENT THROUGH THE OPENING & HIT A BEAM TEARING AN APPROX 1IN PLACE OUT OF THE SHIN AREA OF HIS LEG REQUIRING 6 STITCHES TO CLOSE THE WOUND

EE WALKING DONW CONVEYOR CAT WALK WHEN HE SLIPPED AND FELL CAUSING CONTUSION ON THIGH FROST ON CATWALK.

WORKER WAS REMOVING SPLIT BOLT FROM CRUSHER HEAD BY HITTING A SLUGGING WRENCH WITH A SLEDGE HAMMER. TWO DAYS LATER WORKER REPORTED LOWER BACK PAIN ANDMUSCLE SPASM.

EMPLOYEE CUTTING STRIPS (BUCKER UP STRIPS) ON TOP DECK SCREEN WHEN BODY SHIFTED CAUSING RAZOR KNIFE TO CUT FINGER.

COWORKER HAD SHUT OFF AIR VALVEWS IN CAB AND AT TANK. GAUGES SHOWED ZERO AIR PRESSURE. EE THOUGHT IT SAFE TO WORK ON BLOW TUBE AREA WHICH WAS CLOGGED. HE YSE A SCREWDRIVER TO DISLODGE IT. WHEN HE BROKE THROUGH, THE AIR THAT WAS TRAPPED BETWEEN THE CLOSED VALVE AND THE RESTRICTED AREA WAS RELEASED & BLEW THE MATERIAL ONTO EE. PUNCTURE WOUNDS RESULTED FROM THE MATERIAL.

EE REMOVING U JOINT ON FLE LOADER WITH AIR HAMMER. APPLIED PRESSURE ON 1 OF 2 BOLTS THAT SECURED A FLANGE ON U JOINT OTHER BOLT BROKE CAUSING FLANGE TO SPIN STRIKING LEFT HAND LACERATED LEFT H AND PALM.

EE WAS DISLODGING PIECE OF STONE HUNG IN PRIMARY CRUSHER FEEDER USING A CABLE AND PIECE OF PIPE. EE CUT LOWER LEFT HAND ON PIECE OF PIPE. REQUIRED SIX STITCHES TO CLOSE WOUND.

EMPLOYEE LEAVING YARD ON ENTRANCE RD ON PERSONAL VEHICLE FOR LUNCH COLLIEDED WITH INCOMING DUMP TRUCK PRIVATE EMPLOYEE PASSING PARKED TRUCKS

SUPERVISOR WAS HELPING CHANGE DRILL STEEL. DRILL STEEL GOT OFF BALANCE AND CAUGHT MIDDLE FINGER AGAINST DRILL CAUSING CUT. STITCHES REQUIRED TO CLOSE WOUND.

EMPLOYEE CLOSING DOOR ON RAIL HOPPER FINGER CAUGHT BETWEEN LOCK & DOOR

EMPLOYEE USING AIR HOSE TO CLEAN DIRT & DUST FROM WHEEL ON CAT TRUCK ON WHCH HE WAS WORKING

TRUCK DRIVER WAS BACKING UP UNDER LOADER TRUCK STOPPED LOADER OPERATOR STARTED TO DUMP DRIVER BELIEVED HE WAS NOT UNDER BUCKET SO HE BACKED UP SOME MORE AT THIS TIME LOADER BUCKET HIT TRUCK BE DLINER CAUSING WHIPLASH INJURY TO TRUCK DRIVER

EE WENT INTO THE SWITCH HOUSE TO SEE IF THE BREAKER HAD KICKED OUT ON THE SHUTTLE BELT HE THEN WENT UP ON TH3E LOAD OUT BINS TO THE SHUTTLE BELT & SAW THAT THE CHAIN WAS PARTIALLY OFF OF THE B OTTOM SPROCKET EE TOOK A PIECE OF PIPE APPROX 3FT IN LENGTH & BUMPED THE CHAIN BACK ONTO THE BOTTOM SPROCKET ALL GUARDS WERE IN PLACE A THE TIME OF THE INCIDENT EE LAID THE PIPE DOWN BUT DOES