Buscar en el registro

USING SLATE BAR TO REMOVE TAILGATE STRAINED LOWER BACK

EMPLOYEE WAS BENDING OVER USING A 3/4 INCH RACHET AND IN DOING SO HE STRAINED HIS BACK.

EE WAS CUTTING PLASTIC TIES OFF OF WIRE AND THE KNIFE SLIPPED CUTTING HIS LEFT THUMB.

EMPLOYEE WAS HITTING A STEEL RAIL WITH AN AX TO STRAIGHTEN THE RAIL. LOCATION - TRACK ENTRY.

EMPLOYEE WAS MOVING BRAD BAR FASTENER WHEN HE WAS STRUCK WITH A HAMMER BY ANOTHER EMPLOYEE.

EMPLOYEE WAS PULLING DRAW ROCK DOWN WITH A SLATE BAR AND EXPERIENCED PAIN IN THE RIGHT GROIN AREA.

EMPLOYEE WAS HELPING SPLICE A TRAM CHAIN ON A MINER AND A PIECE OF METAL FROM THE CHAIN PIN BROKE STRIKING EMPLOYEE ON LEFT WRIST.

EMPL HITTING PUNCH WITH HAMMER AND PIECE OF METAL BROKE OFF STRIKING EMPL ON HEAD.#4 ENTRY 280'INBY SPAD 13882.

EMPLOYEE WAS HOLDING A WRENCH ON A BOLT FOR ANOTHER EMPLOYEE TO STRIKE WITH A HAMMER & A PIECE OF METAL FROM THE WRENCH STRUCK THE EMPLOYEE IN THE NECK

EE WAS USING A JACK ON A WRECKED RAIL RUNNER, THE HANDLE SLIPPED FROM THE JACK STRIKING EE UNDER LEFT JAW.

EMPL WAS HELPING MAKE A BELT SPLICE HOLDING NAIL INSERTER TO BRAD BOARD AND WAS TRUCK WITH HAMMER BY FELLOW WORKER

EE WAS INSTALLING A MOTOR IN A FEEDER WITH COME ALONG AS THE MOTOR WENT INTO PLACE IT CAUGHT HIS RIGHT LEG AND KNEE BETWEEN THE MOTOR AND FEEDER FRAME.

AN EMPL WAS XXXXX HELPING EMPL TAKE SLACK UP IN A CONVEYOR CHAIN USING A SLEDGE HAMMER TO HIT CHAIN EMPL ACCIDENTLY STRUCK EMPL ON THE L LITTLE FINGER WITH THE SLEDGE HAMMER

EMPL WAS PRYING BEARING OUT OF SHAFT INTERNAL PART POPPED OUT UNEXPECTEDLY STRIKING EMPL ON LEFT EYE.

EMPL USING LIFTING JACK ON TAILPIECE LETTING IT DOWN USING RATCHET HANDLE FOR JACK BAR.HAD FOOT ON BAR.FOOT SLIPPED AND RATCHET HANDLE FLEW UP STRIKING EMPL ON RIGHT CHEEK.

EMPLOYEE WAS ATTEMPTING TO FREE A FROZEN GEAR ON A RAILROAD CAR HOIST WITH A BLOCK OF WOOD AND SLIPPED HITTING HIS AHND AND FRACTURED HIS THUMB.

BRUISED RIBS RIGHT SIDE. EMPLOYEE WAS PRYING ON BATTERY LID ON A SCOOP, LID CAME OFF AND EM PLOYEE FELL STRIKING RIGHT SIDE ON BATTERY STAND.

EMPLOYEE WAS TRYING TO REMOVE A ROCK FROM THE COAL CHUTE WITH A BAR.

EMPLOYEE WAS MAKING UP SHOTS & POWSDER PUNCH WENT IN FINGER

EMPLOYEE WAS PUTTING REEL IN CUTTER USING ROPE HOIST, ROPE BROKE ON HOIST CAUSING EMPLOYEE TO CUT HIS RIGHT EYE.

PRY BAR SLIPPED WHILE PRYING STRICKING AGAINST A PIECE OF METAL.

EMPL PULLING DRAW ROCK WITH SLATE BAR.

STRICKING METAL PIPE WITH HAMMER RUST FLEW OFF THE PIPE WENT UNDERNEATH SAFTEY CUTTING GLASSES INTO THE EYE.

EMPLOYEE WAS PLASTERING STOPPINGS, CEMENT RAN DOWN HIS ARM SLEEVE AND RUBBLED BISTER ON ARM.

PULLING WITH SLAGE BAR BAR SLIPPED CAUSING WORKER TO TWIST R T .KNEE

WAS OPENING POW8ER BOX WITH A PUNCH, THE PUNCH SLIPPED OUT SIDE OF BOX AND WENT INTO HAND

LIFTING BELT WI7H 7' PIECE OF PIPE.

LIFTING PC 10 P3PE RED DEVILS SLIPPED HANDLE STRUCK ON CORNER OF RIGHT EYE

INSTALLING SHEE7ING ON BUILDING USING ROPE & BLOCK. THE BLOCK CAME LOOSE & HIT THE EE ON THE LEFT CHEEK.

EMPL LEANING OV9R GUARDRAIL AT THE DUMP TO PRY OUT A ROCK THAT WAS HUNG.HE RESTED AGAINST RAIL TO REACH THE ROCK WITH BAR.PRYING THE ROCK LOOSE,HE BROKE RIB ON LEFT SIDE.

EMPLOYEE WAS CU7TING A 3 INCH PLASTIC PIPE, HE CLOSED THE KNIFE UP ON HIS FINGER.

REMOVING OLD SL9EVE FROM OFF OF MEDIA PUMP, STRIKING CHISEL WITH HAMMER, SLIP OFF INJURY TO LEFT THUMB.

A PIECE OF COAL AND ROCK APPROX 4 IN WIDE BY 6 IN LONG AND 5 IN THICK FELL FROM FACE AND HIT HIM ON HAND PIECE WEIGHED APPROX 3 TO 5 LBS

A PIECE OF ROCK FELL OFF FACE OF COAL & HIT FOOT (MIDDLE ROCK IN COAL)

EMP WAS CUTTING A PIECE OF METAL WHEN HE CUT THE METAL OFF IT FELL FROM THE BENCH HITTING HIS RT FOOT