Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
EE was using a hacksaw to cut down loose roof bolt and cut his right wrist.
Trimming splice and knife came into contact with left hand. Sutures required. No lost time.
Beating a race into wheel and pin slipped and cut finger. 2 sutures required.
EE was cutting belt, knife slipped and he cut his left hand. 4 sutures required.
EE was using a lifting jack and it fell over and hit his right middle finger. Fractured finger.
Lifting jack kicked out and put pressure on arm and jerked jack bar out of hand - hurt shoulder. Started missing work 11-29-2010.
He was cutting a piece of belt, knife slipped and cut his right leg. 4 sutures required.
Employee was cutting a rope with a knife and cut his left hand. Sutures were required.
Cutting jacket on a cable with a utility knife and cut left thumb. Sutures required.
Prying with pry bar and hit upper lip and broke some teeth. Went to the dentist to get teeth repaired. No lost time.
Putting a car on the truck and the jack bar hit him on the forehead. Sutures were required just above eyebrow.
Using a jack to raise up belt drive, bar on jack broke and cut his leg. Sutures required - no lost time.
EE was splicing car cable and cut left leg with knife. 3 sutures required. No lost time.
EE was cutting a cable and knife slipped and cut his leg. Ten sutures were required. No lost time.
Cutting belt and cut left leg with knife. 4 sutures required - No lost time.
EE was hitting a metal dolly wheel with a hammer and got a piece of metal in finger. Required surgery & 1 suture. He is working on restricted duty.
EE was splicing phone line and cut top of left hand. Required 7 stitches.
EE bumped his left elbow against the rig. He later had some swelling and pain. He did not report injury until 8-29-05. Started missing 8/23/05. RTW 9/6/05.
Employee cut his left thumb while using a utility knife. 2 sutures required.
EMPLOYEE WAS USING A HAMMER HITTING A CONVEYER SHAFT AND HIT LEFT INDEX FINGER AGAINST A PIECE OF METAL. EE RECEIVED 3 SUTURES TO LEFT INDEX FINGER. NO LOST TIME.
EE WAS HOLDING A FLUID COUPLING FOR HEADRIVE & ANOTHER EE HIT HIS HEARD WITH A SLEDGE HAMMER CAUSING A LACERATION REQUIRING SUTURES TO RT. INDEX FINGER.
EMPLOYEE WAS PULLING ON PRY BAR WHICH SLIPPED & HIT HIS FOREHEAD RESULTING IN 4 SUTURES.
COME-A-LONG HOOK SLIPPED LOOSE AND STRUCK EE LEFT EAR. LACERATION - 3 SUTURES- NO LOST TIME.
EE CUT FOREARM ON BROKEN UTILITY KNIFE BLADE (9 SUTURES).
EE WAS USING A LIFTING JACK & JACK FLEW OUT AND PINCHED INDEX FINGER. EE RECEIVED 4 SUTURES.
EE WAS USING A WRENCH-BOLT BROKE AND JAMMED HAND/THUMB INTO GROUND AND FRACTURED LEFT THUMB.
A GREASE PLUG COME OUT OF A GREASE JACK WHILE UNDER PRESSURE AND STRUCK EE ABOVE RT. EYE.
EMPLOYEE HURT RIGHT ELBOW WHEN PRY BAR SLIPPED. STRAINED ARM & ELBOW.
EE CAUGHT HAND BETWEEN PRY BAR & A PIECE OF METAL ON BRIDGE CONVEYOR AND CUT HAND. RESULTED IN 7 SUTURES.
EE CUT LEFT HAND WITH UTILITY KNIFE WHEN CUTTING ON MINE BELT. EE REQUIRED SUTURES.
EE CUT LEFT ARM WITH A UTILITY KNIFE (7 SUTURES)
CUT RIGHT THUMB WITH KNIFE.
EE WAS CHANGING OUT A TAIL ROLLER AND A RATCHET SLIPPED AND HIT HIM IN LOWER LIP. 2 SUTURES.
EE WAS DRIVING A CONNECTING LINK IN WITH A HAMMER AND A PIECE OF METAL STRUCK EE IN FACE. 8 SUTURES REQUIRED.
EMPLOYEE WAS HELPING SPLICE BELT AND SPLICE BOARD FELL AND HIT EE ON RIGHT MIDDLE FINGER. RESULTED IN 5 SUTURES.
EE CUT RIGHT MIDDLE FINGER WITH KNIFE IN MANTRIPRECEIVED 3 SUTURES.
EE WAS PUTTING ROLLERS IN SLOPE BELT & HURT HIS LEFT ELBOW AND LEFT SHOULDER. EE STARTED MISSINGWORK ON 7/23/01 DUE TO NEED FOR SURGICAL REPAIR TO SHOULDER.
EE HIT RIGHT LITTLE FINGER WITH A HAMMER AND BROKE FINGER.
EE WAS HELPING PULL ROCK OF CONTINUOUS MINER. CHAIN BROKE AND HIT HIM IN THE FACE.
EMPLOYEE'S KNIFE SLIPPED & CUT HIM ON THE RIGHT KNEE, REQUIRING SUTURES.
SLATE BAR SLIPPED AS EMPLOYEE WAS PRYING ON A RAILRUNNER MOTOR, RECEIVED 3 SUTURES.
EE CUT HIS LEG WHILE USING A UTILITY KNIFE TO CUT A PIECE OF CONVEYOR BELT. SUTURES
EE CAUGHT FINGER BETWEEN SLATE BAR AND MOTOR COUPLING - REQUIRED SUTURES.
EMPLOYEE WAS SHOVELING TAKE-UP AND STRAINED BACK