Buscar en el registro

EE STATES THAT HE & (2) TWO CO-WORKERS WERE ATTEMPTING TO FREE A WEDGED CONVEYOR CHAIN ON A CONTINUOUS MINER WITH A SLEDGE HAMMER & BAR. THE BAR WHICH THE INJURED WAS HOLDING SLID UNDER THE CH AIN & THE INJURED'S LEFT HAND WAS CAUGHT BETWEEN THE FRAME OF THE MINER AND THE BAR.

EE REPROTED THAT ON 11-23-02 HE FELT PAIN IN HISLEFT ARM AFTER RELEASING PRESSURE ON COME ALONG.EE WERE MAKING A BELT MOVE AT THE TIME. EE NOW REPORTS THAT A MEDICAL PHYSICIAN DIAGNOSED THE PA IN AS A HAIR LINE FRACTURE. EE STATES THAT THE ON SET OF THE PAIN OCCURRED AFTER RELEASING PRESSURE ON A COME ALONG WORKED UNTIL 1-6-03

THE EE WAS USING A BLOCK HAMMER TO LOOSEN A CLAMP ON A CHAIN. WHEN HE SWUNG THE HAMMER, IT GLANCED OFF THE CLAMP AND STRUCK HIS RIGHT KNEE.

THE EE WAS DIRECTED TO MOVE A BATTERY STAND IN THE CHARGING STATION (ABOUT 4"). HE USED A SLATEBAR 48" TO PRY THE STAND OVER. HE FELT LOWER BACK PAIN WHILE DOING THIS. HE STARTED MISSING WORK ON 5-29-02, DUE TO THIS.

EE WAS ASSISTING AN ELECTRICIAN TO ALIGN A MAIN CONTROL PANEL OF THE SHUTTLE CAR TO INSERT BOLTS. HE PLACED A BAR BETWEEN THE FRAM & PANEL OF SHUTTLE CAR. HE WAS PULLING WITH A JERKING MOTION ON THE BAR & CLAIM TO FEEL PAIN IN LOWER BACK.

WHILE USING A UTILITY KNIFE TO CUT A PLASTIC LID FROM A BUCKET, THE KNIFE SLIPPED AND CUT THE EMPLOYEE'S LEFT THUMB.

HE WAS HELPING PUT BEARINGS IN CENTER SECTION OFA UNIHAULER. ANOTHER EMPLOYEE WAS USING A PORTA-POWER TO PRESS THE BEARINGS IN PLACE. THE VICTIMWAS WATCHING THE BEARINGS TO SEE IF THEY WERE MO VING. THE BEARINGS SHOT OUT AND STRUCK HIM.

THE EE JOB TASK WAS TO REMOVE A TIRE FROM A ROOF BOLT MACHINE. THE LUG NUTS WERE TIGHT AND THE EE DECIDED TO USE A BREAKER BAR ALONG WITH THE RATCHET. WHILE STANDING ON THE BREAKER BAR, THE BA R SLIPPED FROM THE RATCHET. THE EE SLIPPED AND THE BREAKER BAR FLEW OFF THE RATCHET, STRIKING EE IN CHIN AND MOUTH LOST TOOTH AND STITCHES IN LIP.

HE WAS HELPING MAKE A BELT SPLICE & GOT HIS LEFTTHUMB CAUGHT IN THE COME-A-LONG RATCHET BEING USED TO PULL THE TWO ENDS OF THE BELT TOGETHER.

HE WAS HELPING MOVE A PIECE OF SHAKER SCREEN ACROSS THE BOTTOM FLOOR OF THE PLANT. THEY WERE USING CHAIN HOISTS & PRYBAR. HE SAID HE PRIED FROM AN AWKWARD POSITION AND FELT PAIN IN HIS LOWER BACK. FINISHED THE SHIFT COULD NOT GET OUT THE NEXT DAY.

WHILE WORKING IN SHIP USING A SLATE BAR, THE BAR SLIPPED AND RIGHT ELBOW WAS BENT BACK.

WHILE EMPLOYEE WAS CUTTING A PIECE OF MINE BELT WITH UTILITY KNIFE, THE KNIFE SLIPPED CAUSING A LACERATION TO RIGHT THIGH REQUIRING STITCHES.

THE EE'S WERE BEATING CONCRETE OUT OF A 3" SLICKLINE. ONE OF THE EE'S HIT HIM ON HIS LEFT RING FINGER.

EE WAS ATTEMPTING TO TAKE A HOSE OFF OF A FITTING WITH A HAMMER. HE HIT HIS LEFT INDEX FINGER WITH THE HAMMER, SMASHING FINGER.

WHILE EE WAS MAKING A BELT SPLICE USING A GERMAN HOIST, HIS KNEE POPPED OUT OF PLACE. THIS ACCIDENT HAPPENED ON 3 LEFT #1 BELT TRACK.

WHILE EMPLOYEE WAS PULLING THE BELT TOGETHER WITH A WIRE ROPE CABLE, THE SHIEVE WHEEL ANCHOR BROKE ALLOWING THE SHIEVE TO FLY DOWN THE CABLE,HITTING EMPLOYEE IN THE RIGHT LOWER LEG. IT BROK E THE FIBULA BONE.

EMPLOYEE WAS HOLDING A PIECE OF PLATE METAL THATWAS BEING PLACED ON A MOTOR SHAFT. THE PLATE WAS BEING DRIVEN ONTO, THE SHAFT WITH A SLEDGE HAMMER. DURING THIS WORK ACTIVITY, THE INJURED EMPLOYEE WAS HIT ON THE RIGHT THUMB WITH SLEDGE HAMMER.

WHILE USING WIRE CUTTERS TO TIE WIRE AROUND REBAR, THE CUTTERS GOT CAUGHT IN WIRE, INJURED PULLED ON CUTTERS AND WIRE BROKE CAUSING CUTTERS TO STRIKE INJURED IN MOUTH CAUSING LACERATION TO LIP AND CHIPPED FRONT TOOTH.

EE WAS MOVING TOOL BOXES IN THE PREPARATION PLANT CONTROL WITH A COMEALONG & PRYBAR & STRAINED HIS BACK. HE WAS USING THE COMEALONG & PRY BAR TOMOVE THE TOOL BOXES ACROSS THE FLOOR

WHILE EE WAS CUTTING MINE BELT, THE KNIFE SLIPPED CAUSING A CUT TO LATERAL SIDE OF RIGHT KNEE CAUSING 9 STITCHES

EMPLOYEE WAS HELPING MOVE A SCREEN MECHANISM OUT OF THE PLANT. THE MECHANISM WAS BEING MOVED WITH A HOIST WITH ONE END RESTING ON THE FLOOR AND THE OTHER END LESS THAN SIX INCHES FROM THE FLOO R. THE BACK OF THE MECHANNISM GOT HUN GON A PIECE OF PIPE AND THE EMPLOYEE PULLED SIDEWAYS TO FREE IT AND THE CHAIN HOOK SLIPPED AND CUT HIS FINGER.

EE WAS CHANGING A SPLIT UNIT SPROCKET. WHEN HE CUT THE WELD THAT WAS HOLDING THE UNIT TOGETHER HALF OF THE SPROCKET FELL CAUSING A PUNCTURE WOUND TO THE TOP OF HIS RIGHT FOOT.

WHILE EMPLOYEE AND ANOTHER EMPLOYEE WERE STARTING TO SAW A POST, THE SAW JUMPED AND CUT KNUCKLE ON HAND REQUIRING STITCHES.

MAN WAS PULLING ON A CONVEYOR BELT WITH HAND BELT CLAMP. THE CLAMP SLIPPED CAUSING MAN TO FALL DOWN. WHILE FALLING DOWN, HE EXTENDED LEFT ARM TO CATCH HIMSELF. HIS LEFT HAND STOPPED HIS FALL B UT HIS LEFT WRIST BROKE. CONVEYOR BELT WAS COLD AND HAD FROST ON IT DUE TO COLD WEATHER.

JACKING 65 LB RAIL AND JACK HANDLE SLIPPED OUT OF JACK STRIKIGN EMPLOYEE IN MOUTH.

EMPLOYEE WAS PRYING THE POCKET UP ON A RAILROAD CAR WHEN THE PRY BAR SLIPPED CAUSING HIM TO LOOSE HIS BALANCE AND FELL ON RIGHT ANLE.

EMPLOYEE WAS STANDING APPROX 10' FROM A DOZER WHEN ANOTHER EMPLOYEE STRUCK DOZER RAIL WITH A SLEDGE HAMMER. PIECE OF METAL FLEW OFF THE RAIL HITTING EMPLOYEE IN THE EYE.

EMPLOYEE WAS CUTTING BAND ON BOLTS WHEN THE BAND SNAPPED STRIKING HIM IN THE LEFT FOREARM REQUIRING 5 STITCHES

EMPLOYEE WAS PERFORMING MAINTANCE ON BELF CONVEYOR SCRAPER. EMPLOYEE WAS TIGHTENING A BOLT WITH A WRENCH THE WRENCH SLIPPED OFF THE BOLT HEAD, HITTING HIM IN THE NOSE.

EE WAS WORKING ON BELT SCRAPER WHEN THE WRENCH SLIPPED OFF THE BOLT HITTING HIM ON HIS RT SIDE. THE ACCIDENT HAPPENED ON 8-20-94. HOWEVER, DID NOT BECOME REPORTABLE UNTIL 8-30-94, WHEN HE BEGA N MISSING WORK.

INJURED WAS USING A SLATE BAR ATTEMPTING TO SLIDE THE TOP ROLLER OF THE MAGNETIC SEPARATOR SIDEWAYS. INJURED WAS STANDING ON THE FLOOR REACHING UP WHILE PRYING. THE SLATE BAR SLIPPED LOOSE CAUSING INJURED TO FALL BACKWARD. INJURED LANDED ON HIS MINE LIGHT BATTERY CAUSING PAIN INHIS RIGHT SIDE.

EMPLOYEE WAS CHIPPING CONCRETE WITH HAMMER & CHISEL WHEN THE HAMMER SLIPPED CAUSING A CONTUSION OF THE LEFT THUMB

HOOK ON CHAIN HOIST CONNECTED TO SIDE PLATE OF SCREEN UNIT SLIPPED LOOSE & STRUCK EMPLOYEE ON LEFT KNEE

EMPL REMOVING COVER FROM DISK DRYER WHEN IT SLIOPPED IN THE COMEALONGS AND WENT SIDEWAYS CAUSING THE CORNER OF THE COVER TO STRIKE EMPL ON FOOT BEHIND HARD TOE SHOE SMASHING TOE.

WHILE CHANGING A DRIVE UNIT ON A SCREEN,I.NAME MASHED HIS THUMB.HE WAS POSITIONING THE UNIT WHILE MOVING IT WITH A CHAIN HOIST.THE UNIT MOVED CAUSING THUMB TO BE MASHED AGAINST A BEAM.

EMPLOYEE WAS USING COME-ALONGS TO LFIT SUBFRAME WHEN THE CABLE SLACKED AND PINCHED HAND BETWEEN HANDLE AND DRAG CONVEYOR.

EMPLOYEE WAS USING COME-A-LONGS WHEN HE HIT HIS ELBOW ON SCREEN.

HELPING INSTALL WEAR PLACT IN TRUCK DUMP FEEDER TIGHTENING BOLTS OVERHEAD WITH SOCKET AND WRATCHET FELT PAIN IN LOWER BACK

WHILE REMOVING COUNTEWEIGHT FROM COAL SCREEN, THE COUNTERWEIGHT WAS BEING LIFTED WITH A RACHET CHAIN BLOCK. THE CHAINFALL SLIPPED CAUSING THE COUNTERWEIGHT TO FALL AND CATCHING THE EMPLOYEES HAND BETWEEN A BRACE ON THE GUARD FOR THE COUNTERWEIGHT AND THE COUNTERWEIGHT. THE EMPLOYEE WAS NOT SURE IF HE HAD LOCKED THE RACHET ON THE CHAIN.

WHILE INSTALLING NEW WEAR PLATEIN #6 RAW COAL FEEDER IT BECAME NECESSARY TO PRY PLATE AROUND PIPE. LADY SLIPPER PRY BAR WAS USED FOR THIS. ONCE PLATE CLEARED PIPE PLATE SLIPPED BACK CAUSING EM PLS HAND TO BE CAUGHT BETWEEN PLATE & LADY SLIPPER.

WHILE MAKING AN ADJUSTMENT ON THE NO. 6 REFUSE SKIRT RUBBER, HE STATED HE HIT THE RUBBER WITH A HAMMER CAUSING A PIECE OF SLATE TO CHIP WHICH THEN STRUCK HIM IN THE LEFT EYE. THE PIECE OF SLAT E WHICH STRUCK HIS LEFT EYE CAUSED A CORNEAL ABRASION.

DRIVING BULL PIN WITH HAMMER MISSED HITTING HAND AGAINST STEEL FRACTURED R HAND

AS I.NAME WAS U8ING A PRY BAR TO LOOSEN BOTTOM DECK SCREEN OF COARSE REFUSE UNIT THE PRY BAR APPARENTLY SLIPPED CAUSING I.NAME T O TWIST HIS BODY & THUS INJURING HIS BACK

EMPLOYEE WAS AD4USTING BELT ALIGNMENT ON #8 REFUSE BELT WHEN THE WRENCH HE WAS SUSING SLIPPED OFF THE ADJUSTING BOLT CAUSING HIM TO FALL BACK INTO JUNCTION BOX AND LADDER ON WALKWAY