Buscar en el registro

The operator of the fletcher roof bolter dropped the head of the machine on his knee.

Employee was tramming the roof bolter from the deck and had his foot hanging out of the bolter when he got his foot caught between the roof bolter and the rib in the number 5 entry.

Employee was drilling the top installing a bolt when his drill steel hung. As he was reaching for a wrench to loosen the bolt it came unloosed and fell. The ee had his hand lying on the top of the drill pot and the bolt hit his middle finger on his right hand. Caused a fracture to finger.

EE HAD DRILLED A 42" HOLE & GOT THE DRILL STEEL HUNG IN HOLE. HE THEN PUT THE WRENCH ON THE HUNGDRILL STEEL & WHEN HE TURNED THE WRENCH THE RUBBER GLOVES HE HAD ON FOULED ON THE WRENCH & DRILL STEEL & TWISTED HIS ARM. THE AREA HE WAS WORKINGIN WAS WET & MUDDY.

EE WAS BOLTING TOP IN THE #3 HEADING WHEN 3O" PIECE OF DRILL STEEL HE WAS USING BROKE & HIT HIM IN THE MOUTH AREA

EE WAS HANGING A LINE CURTAIN IN #2 HEADING AND HAD HIS BACK TURNED AWAY FROM MINER. MINER CAME AROUND CORNER GOING INTO #2 HEADING STRIKING EE IN BACK AND RT FOOT WITH MINER HEAD.

WHILE MAKING A CROSSCUT TURN IN THE NO. 7 HEADING, THE MINER HELPER WAS STRUCK BY THE BOOM OF THE CONTINUOUS MINING MACHINE.

EMP WAS SPOT BOLTING THE ROOF. PIECE OF ROCK 6" THICK BY 2" WIDE, 6.8"LONG, FELL WHEN THE PINNERSTEEL STARTED IN THE ROOF CATCHING HIS FINGER ONTHE HEAD OF THE BOLTING MACHINE.

THE INJURY OCCURRED WHEN EMPLOYEE WAS INSTALLING ROOF BOLTS AND A PIECE OF DRAW SLATE FELL. THE VICTIM JUMPED TO MISS IT AND STRAINED LOWER BACK.

DRAW SLATE FELL BETWEEN THE ROOF BOLTS, STRIKING HIM ON THE RIGHT SIDE OF HIS BACK.

THE MAN WAS SPOT BOLTING. HE WAS PUTTING IN EXTRA BOLTS IN A LOOSE ROCK IN THE ROOF. A PIECE OF ROCK 6"X2'X2' BROKE OFF THE ROCK HE WAS SUPPORTING & FELL BEHIND THE MAN, CAUSING HIM TO TURN QU ICKLY. ALL THE MAN'S WEIGHT. WAS ON HIS LEFT ANKLE IN A TWISTED POSITION CAUSING THE INJURY. THE ROCK DIDN'T HIT THE MAN BUT IT CAUSED HIM TO REGET SUDDENLY & CAUSE THE INJURY.

WAS OPERATING CONTINUOUS MINER WITH FEET HANGING OUTSIDE OF DECK. CONTINUOUS MINER WITH FEET HANGING OUTSIDE OF DECK. CONTINUOUS MINER CAUGHT HIS FOOT BETWEEN THE MINER FRAME AND A ROCK, CAU SING A BRUISED FOOT.

THE ATRS JACK WAS EXTENDED WHEN THE OPERATOR LOWERED THE BOOM HIS R HAND BECAME FOULED BETWEEN THE SHIELD AND A VALVE

MAN WAS BOLTING 2 HEADING. PLACE WAS SLANTING TO THE LEFT. MAN WAS ATTEMPTING TO BACK THE BOLTER FROM LEFT TO RIGHT SIDE OF THE PLACE. HE WAS OPERATING THE BOLTER FROM THE DECK. THE MAN S LEFT FOOT WAS OVER THE EDGE OF THE DECK. THE BOLTER SLID TO THE LEFT CATHING HIS TOE UNDER THE SIDE OF THE BOLTER.

EMPL WAS ROOF BOLTING SMALL PIECE OF ROCK FELL STRIKING EMPL ON HEAD. HE TRIED TO MOVE AWAY FROM ROCK CAUSING HARD HAT TO DROP OFF HIS HEAD.

MARKING OFF LAST BOLT IN 2ND ROW & ROCK FELL BETWEEN SAFETY JACK & ATRS JACK CATCHING MACHINE OPER ON BACK & SHOULDER & PINNING HIM TO GROUND.

EMPL WAS ROOF BOLTING HE HAD STARTED DRILLING HOLE WHEN SMALL PIECE OR ROCK FELL FROM AROUND DRILL STEEL STRIKING EMPL IN FACE. IMPACT OF ROCK CAUSED INSDIE OF LIP TO BE LACERATED.

HE WAS STARTING TO PUT A ROOF BOLT IN THE DRILL HOLE WHEN THE ROOF BOLT PLATE HIT HIM IN THE LEFT EYE

REACHED UP TO GET STEAL OUT OF BOLTER HEAD AND HIT LEVER AND RAISE DD PINNER HEAD UP AND CAUGHT HAND BETWEEN TOP AND PINNER HEAD.

A WRENCH USED FOR TIGHTENING BOLTS SLIPPED FRO THE BOLT HEAD AND STRUCK THE OPERATOR ON THE FOREARM. THE IMPACT BROKE A BONE IN THE FOREARM.

WHILE TURNING A RT BREAK IN THE #3 BELT ENTRY THE CONVEYOR CHAIN ON THE 14-1 JOY MINER SLIPPED OUT OF THE BOOM STRIKING THE OPERATOR ON THE LEFT SHOULDER THE INJURED MAN WAS T AKEN TO A LOCAL CLINIC X-RAYS WERE TAKEN DIAGNOSIS BRUISED SHOULDER

WHILE TRAMMING THE 300 GALIS ROOF BOLTER THE OPERATOR INADVERTENTLY TRAMMED THE MACHINE UPON HIS LEFT FOOT THE OPERATOR SUSTAINED A BRUISE AND SWELLING THE HIS FOOT X RAYS SHOWED NO BREAKAGE O F ANY BONES.

WHEN INSTALLING ROOF BOLT THE ROOF BOLT BENT & HE WAS TRYING TO BEND IT AGAINST TOP & THE WRENCH SLIPPED & CAUGHT HIS LEFT HAND AGAINSTG ROOF BOLTER NO 1 FINGER & THUMB WAS HURT NO CUTS

ROCK DISLODGED 0ROM BETWEEN BOLTS ALREADY INSTALLED FALLING ON HAND OF OPERATOR

HE WAS MOVING M3NER HE SPLIT THE CATS THE MINER PINNED HIM AGTAINST THE RIB

ROOF BOLTER OPE9ATOR WAS INSTALLING FINAL BOLT OF CUT WHEN A ROCK DISLODGED FROM TOP. THE OPERATORS HAND WAS CAUGHT BETWEEN THE ROCK & THE DRILL HEAD.

GREASING TRUCK 4ITH AIR GREASE GUN QUIT OPERATING WENT & CHECKED GUN & CAUGHT TIPS OF 3RD & 4TH FINGER IN GREASE TUB AIR PISTON CUT FINGERS OFF AT 1ST KNUCKLE.

INJURED WAS DRI5LING TOP WHEN ROCK AROUND DRILL STEEL FELL OUT HITTING PINNER ABND SMALL PIECE BROKE OFF AND BOUNCED HITTING OPERATOR IN ARM ARM WAS BRUISED AND BONE CRACKED JACKS HAD BEEN SE T ROOF HAD BEEN3VISUALLY CHECKED AND SOUNDED

MAN HAD SCALED 9OCK IN FACE AREA PRIOR TO BOLTING DURING HIS BOLTING PROCEDURE HE TRAMMED. HIS PINNER FORWARD WITH OUT RAISING UP HIS STAB JACK. JACK SHOVED ROCK AGAINST HIS KNEE AND BRUISED I

INJURED MAN WAS3ATTEMPTING TO PULL CABLE OFF OF A BELT TAKEUP WHEN HE GRABBED CABLE AT SHIR WHEEL THE TAKEJERK WAS OPERATED THE WRONGDIRECTION & THE VICTIMS HAND WAS PULLED AGAINST WHEEL MAN O PERATING TAKE-U1 DIDNT KNOW THE MAN HAD HIS HAND ON STEEL CABLE THE INJURED MANS FINGERS WERE SMASHED

PINNER WAS ATTEMPTING TO SPIN GLUE BOLT AND WRENCH SLIPPED ON BOLT HEAD WHILE ROTATION WAS ON AND A PIECE OF METAL WENT IN MAN EYE.

THE SECTION IS ONLY 36" HIGH, WE USE 36" ROOF BOLTS SO IT IS NECESSARY TO PUSH ROOF BOLTS IN HOLE WITH BOOM OF ROOF BOLTER TO BE ABLE TO USE THE TORQUE WRENCH TO TIGHTEN THE BOLTS WHEN THE BOO M IS NEAR THE TOP YOU SHOULD TAKE CARE TO KEEP HAND IN THE CLEAR

CAUGHT RIGHT KNEE BETWEEN PINNER AND RIB.

PIECE OF ROCK FELL ON ARM

SUBJ ROOFBOLTING #5 R BREAK HAD COMPLETED 1 ROW WAS MOVING BACK TO LEFT SIDE OF PLACE TO BOLT 2ND ROW.CONTROL LEVER HUNG PINNING OPERATOR INTO RIB AT HIPS.

PIECE OF ROCK FELL AROUND ROOF JACK.

PUSHED STEEL IN BOLTER UP ON FINGER.

PIECE OF ROCK FELL BETWEEN JACKS

OPERATOR WAS MOVING MINER AS A RESULT OF NORMAL MINING CYCLE FROM #1 ENTRY TO #3 ENTRY WHEN OPERATOR SPLIT CATS ON MINER TO SQUARE UP WITH #3 ERNTRY HE PINNED BOTH LEGS BETWEEN MINER & RIBS.

INJURED HAD ARM ON BOLTER AND A PIECE OF ROCK FELL HITTING HIM ON ARM