Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
EMPLOYEE ALLEGES THAT WHILE WELDING ON A FRONT END LOADING ARM A WELDING SPARK ENTERED HIS RIGHT EAR. HE ALLEGES THAT IT BURNED FOR A COUPLE OF MINUTES THEN IT QUIT HURTING SO HE FORGOT ABOUT IT.
EE ALLEGES THAT WHILE OPERATING A GRINDER IN AN AREA WITH LIMITED WORKING SPACE, THE GRINDER KICKED BACK STRIKING HIM IN THE NOSE. INJURY REQUIRED STITICHES.
EE LOOSENED HOSE ON RIPPER LIFT CYLINDER UNAWARETHAT IT WAS UNDER PRESSURE. AIR & OIL SPRAYED OUT OF HOSE INTO HIS FACE. HIS EYES WERE FLUSHED; HE WAS TAKEN TO AREA DOCTOR TO BE CHECKED OUT. FLUSHED EYES. OBSERVED NO SCRATCHING. GAVE PRESCIPTION & RELEASED TO RETURN TO WORK.
WAS RELEASING THE TIRE RAM REACHED OVER TO MOVE AN AIR POT & LEFT HAND BECAME CAUGHT BETWEEN THETWO ITEMS
EE ALLEGES THAT HWILE MOUNTING A TIRE ON A COAL HAULER'S RIM, THE OVERHEAD CRANE IN THE SHOP FAILED TO STOP. THE TIRE RING SMASHED EMPLOYEE'S FINGERS AGAINST THE TIRES RIM.
EE ALLEGES THAT HE WENT UPON THE 2 PLOW TO CHECK THE TOE OF COAL IN THE BARN, WHEN THE PLOW HIT ITS STOP 1/2 REVERSED DIRECTION, CAUSING THE EE TO LOSE HIS BALANCE AND FALL ONTO THE HANDRAIL I NJURING HIS SHOULDER.
EE ALLEGES THAT A TRUCK STOP BEING MOVED BY AN OVERHEAD CRANE, HIT HIS RIGHT FOOT & RESTED ON HIS TOES. EE ALLEGES THAT CONTROL BUTTON DID NOT FUNCTION PROPERLY FAILING TO STOP.
EE ALLEDGES THAT WHILE GRINDING WELDS DOWN ON THE DRAGLINE BUCKET, HE RECEIVED FLASH BURNS TO HIS EYES FROM A NEAR BY WELDER'S OPERATION. EE ALLEDGES THAT HE WAS WEARING PROTECTIVE EYEWEAR,(RE G. SAFETY GLASSES & A CLEAR GLASS ON HIS WELDINGHOOD.) EE WAS STILL FEELING DISCOMFORT IN HIS EYES SO ON 6-27-07 HE RETURNED TO DR WHERE THEY REMOVED METAL SPLINTERS FROM HIS EYES, CAUSING HI
EMP ALLEGES WHILE HELPING TO LIFT A TRUCK BOX ONTO THE TRUCK, THE OPERATOR SLACKED SLINGS TO READJUST BOOM. THE ANGLE PIN USED TO SECURE SLINGS CAME LOOSE AND PIN FELL ON EMP'S ANKLE. INCIDENT QUESTIONED AS EMP DID NOT SEE DR TIL 3 DAYS LATER, NOR DID HE REPORT IT TO HIS SUPERVISOR TIL 2 DAYS LATER ON 7-28-96.
EMPLOYEE WAS CUTTING IRON IN WELDING SHOP WHEN EMPLOYEE TURNED TO SHUT OFF OXYGEN, A 50 LB PIECE OF IRON FELL OFF CUTTING TABLE, BOUNCED AND LANDED ON EMPLOYEE'S FOOT, CAUSING A FRACTURE TO ME TA-TARSAL AND TARSUS ON LEFT FOOT.
THE EE S RIGHT INDEX FINGER WAS PINCHED BY AN AIR VALVE CONTROL ROD THAT ACTIVIATED THE HYDRAULIC VALVE FOR THE AIR COMPRESSOR ON THE TEREX LUBE TRUCK. WHEN THE CONTROL ROD ACTIVATED IT CAUGHT THE EE INDEX FINGER CAUSING AN AVULISON TO THE TIP OF HIS FINGER.
THE EMPLOYEE STATED THAT WHILE REPAIRING THE WELDING SHOP OVERHEAD DOOR HE GOT SOMETHING IN HIS EYE. THE EMPLOYEE STATED HE FIRST STARTED NOTICING THAT SOMETHING WAS IN HIS EYE AFTER HE UNHOO KED THE AIRHOSE TO AN M-PACT GUN HE WAS USING. THE EMPLOYEE STATED HE WAS USING HIS SAFETY GLASSES.
THE EMPLOYEE STATED HE WALKED INTO IS OFFICE AFTER BEING OUT IN THE WAREHOUSE & FELT SOMETHING IN HIS EYE THE EMPLOYEE SAID HE HAD BEEN WEARING HIS SAFETY GLASSES
EMPLOYEE WAS OPERATING A CAT DOZER PLOWING IN LIME WHEN HE GOT LIME DUST IN HIS RIGHT EYE.
EMPLOYEE STATED HE HAD SOME DUST BLOWN IN TO HIS RIGHT EYE WHEN HE STARTED THE GRINDER IN THE WELDING SHOP. HE WAS WEARING SAFETY GLASSES. THE DOCTOR FOUND A SMALL PIECE OF CLEAR PLASTIC EMBED DED IN HIS EYE.
EE WAS UNHOOKING A CABLE FROM A MACHINE WHEN THE CABLE UNEXPECTEDLY MOVED CAUSING THE 1 INCH CUT TO HIS INDEX FINGER OF HIS LEFT HAND.
EMPLOYEE WAS OPERATING A CAT SCRAPER BEING LOADED IN THE CUT AREA WHEN HE WAS BEING PURSHED BY THE CAT DION PUSH TRACTOR THE PURSH TRACTOR BUMPED THE SCRAPER JERKING THE OPERATOR CAUSING THE I NJURY
EE WAS NOT PAYING ATTENTION TO THE ACCOUMULATION OF GRINDING PARTICLES AT THE TOP OF GRINDING FACE SHIELD.
EE WAS NOT PAYING ATTENTION TO THE ACCUMULATION OF PARTICLES AT THE TOP OF GRINDING FACE SHIELD.
2 MEN WERE GRINDING SIDE BY SIDE OBJECT GOT INTO EYE AND SUCK INTO EYEBALL.
WHILE WORKING IN WELDING SHOP, EE DROPPED A PIECE OF ANGLE IRON ON HIS HAND.
THE EMPLOYEE, (A SUPERVISOR) ALLEGED HIS RIGHT GLOVE AND THUMB GOT CAUGHT AND WRAPPED AROUND THE SHAFT OF A 10" HONE THAT WAS CONNECTED TO A 1/2" DRILL MOTOR. THE EMPLOYEE WAS ASSISTING ANOTHE R EMPLOYEE WHO WAS OPERATING THE DRILL WHEN THIS OCCURRED.
THE EE ALLEGED WHILE CHIPPING SLAG FROM A WELD WITH AN AIR CHIPPER HE GOT SLAG INTO HIS RIGHT EYE. THE EE STATED THAT THE CLEAR LENS INSIDE HIS WELDING HOOD WAS NOT PROPERLY INSTALLED ALLOWING THE SLAG TO COME THRU THE EE STATED HE WAS WEARING HIS SAFETY GLASSES.
THE EMPLOYEE SAID THAT WHEN HE DRAPED THE CARBON ARC GOUGING ASSEMBLY OVER HIS ARM TO CHECK HIS PROGRESS THE YELLOW HOT TIP OF THE GOUGING ROD STRUCK HIS UPPER LEFT THIGH PENETRATING HIS PANTS AND PUNCTURE HIS LEG APPROX. 1/4 INCH.
THE EMPLOYEE ALLEGED WHILE TROUBLE SHOOTING AN AIR OPERATED LUBE PUMP HE PLACED HIS HAND OVER THE PUMP SUCTION PORT TO DETERMINE IF THE PUMP WAS CREATING A VACUUM AND HIS LITTLE FINGER CAME IN CONTACT WITH THE PUMP PISTON AND THE PUMP BODY.
THE EMPLOYEE ALLEGED THAT AFTER USING A TORCH TO CUT A BROKEN DUMP ROPE (1 1/2" WIRE ROPE CABLE) ON THE PAGE DRAGLINE BUCKET THE HOT END OF THE ROPE DROPPED AGAINST THE INSIDE CALF OF HIS RIGH T LEG. THE CABLE BURNED THROUGH HIS PANTS CAUSING A 1" X 4" SECOND DEGREE BURN.
RIGGER WAS DRILLING BOLTS AND STATES THAT DRILL BIT BROKE PUNCTURING LEFT INDEX FINGER AND HAND.
WELDER WORKING CLOSE TO CO-WORKERS GRINDING; GRINDING DUST/FOREIGN BODY IN LEFT EYE.
54736YEE WAS OPERATING A CAT D9 PUSH TRACTOR PUSHING SCRAPERS. WHILE BACKIN GUP TO START PUSHING A SCRAPER THE D9 BACKED OVER SOME UNEVEN GROUND CAUSING THE MACHINE TO JERK INJURING THE EMPLO 855?2 LOWER BACK. THE EMPLOYEE INFORMED HIS SUPERVISOR THAT HE WAS NOT INJURED AND RETURNED TO WORK REFUSING MEDICAL TREATMENT UNTIL 7-13-92. AT THIS TIME THE EMPLOYEE WAS TAKEN TO THE DOCOT
EE ALLEGES THAT WHILE USING A CHUTTING TORCH TO CUT ENDS FROM WIRE ROPE SOCKETS WHILE CHANGING DUMP CABLES ON 2570 DRAGLINE BUCKETS, HE FELT A FOREIGN OBJECT ENTER HIS RIGHT EYE EE ALLEGES HE WAS WEARING SAFETY GLASSES AND A FACE SHIELD.
EMPLOYEE ALLEGED THAT WHILE PERFORMING GRINDING OPERATIONS,THE GRINDING DISC EXPLODED AND A FRAGMENT LACERATED HIM IN THE LOWER TRUNK REGION BELOW THE RIGHT HAND SIDE OF THE RIBCAGE.
EMPLOYEE ALLEGES THAT WHILE GRINDING A METAL STRAP 2INX1/4INX3IN WIT H HIS SNAP ON AIR GRINDER THE GRINDING WHEEL BROKE THE GRINDING WHEEL WAS A NORTH 31/2X1/3X7/8 A PIECE OF THE WHEEL CAUSED A LACRATION R4EQUIRING STITCHES TO EMPLOYEES LEFT THIGH
THE EMPLOYEE ALLEGED THAT WHILE WELDING ON THE MARIONDRAGLINE BUCKET HE HAD HIS BODY IN THE SAME POSITION FOR A PERIOD OF 4 TO 5 HOURS. AFTER STANDING UP AT THE END OF SHIFT THE EMPLOYEE FELT A STIFFNESS AND PAIN IN HIS LOWER BACK. THE EMPLOYEE WENT TO A CHIROPRACTOR FOR A TREATMENT OF HIS BACK.
EMPL STATED THAT HE HAD BEEN GRINDING ON DRAGLINE BUCKET DURING SHIFT & WAS WEARING SAFETY GLASSES & WELDING HOOD. EMPL ATTEMPTED TO IRRIGATE EYE BUT COULD NOT REMOVE FOREIGN MATERIAL.
THE EMPLOYEE ALLEGED THAT WHILE OPERATING A 16G MOTOR GRADER IN THE PIT, A PIECE OF DIRT CAME OUT OT THE A/C BLOWER AND GOT UNDER HIS RIGHT EYE LID. HE WAS WEARING SAFETY GLASSES. HE WAS TAKEN TO THE HOSPITAL EMERGENCY ROOM AND HAD IT WASHED OUT. THE DIRT PARTICLE DID NOT SCRATCH HIS EYE, BUT HE WAS GIVEN MEDICATION AS A PRECAUTION. THIS WAS STANDARD PROCEDURE AT THE HOSPITAL TO PR
AFTER ADJUSTING THE BRAKE OF A SWING MOTOR ON A 8200 MARION DRAGLINE, THROUGH A MISS COMMUNICATION, HIS COWORKER ENGAGED THE SWITCH TO CLOSE THE BRAKE. HIS THUMB BECAME PINCHED IN THE SHAFT/BR AKE. HIS COWORKER, DUE TO THE HIGH LEVEL OF NOISE THOUGHT THAT HE HEARD THE REQUEST TO CLOSE THE SWITCH BUT FAILED TO VERIFY AND ENSURE THAT EVERYONE ELSE WAS CLEAR. THIS OCCURRED WHILE I.NAM
EMPL CUTTING LARGE PLATE WITH TRACK CUTTING TORCH,PIECE OF PLATE FELL TO GROUND BOUNCED AND LANDED ON TOP OF HIS FOOT.
POSITIONING SELF TO FRIND ON DRUM HAND PUSHED DOWN ACTIVATING TRIGGER LACERATING FINGER INDEX , RIGHT
EMPL HAD BEEN GRINDING ON LUBE BED OF #1135-125 FUEL TANK AND LATER RUBBED EYES AND FELT SOME DISCOMFORT IN RIGHT EYE.EMPL HAD BEEN WEARING FACESHIELD AND SAFETY GLASSES WITH SIDE SHIELDS WHIL E GRINDING.
THE EMPLOYEE STATED THAT WHILE INSTALLING A/C HOSES AND WIRING ON #1390-410 ASH TRUCK HE FELT FOREIGN MATERIAL STRIKE HIS RIGHT EYE. THE EMPLOYEE STATED THAT THE CAB AREA WAS BEING CLEANED WIT H COMPRESSED AIR BY OTHER MECHANICS. THE EMPLOYEE STATED THAT HE WAS WEARING SAFETY GLASSES.
THE EMPLOYEE STATED THAT WHILE ATTENMPTING TO REMOVE A RUNNING CHAIN SAW THAT WAS JAMMED UNDER A FELLED TREE, HE IJURED HIS LEFT KNEE WHEN THE CHAIN SAW FELL AGAINST HIS LEFT KNEE.
WAITING TO BE PUSHED UP MIDRAMP MUD BROKE DRIVERS WINDOW GLASS LACERATED L ARM.
THE EE STATED THAT HE WAS DOING BODY WORK ON THE CRANE PRIOR TO PAINTING. THE EE STATED THAT HE WAS GRINDING THE BONDO SMOOTH WHEN A FOREIGN BODY BECAME EMBEDDED ON HIS RIGHT EYE. EE WAS WEARI NG SAFETY GLASSES BUT NO GOGGLES WHEN INJURED.
THE EMPLOYEE ALLEGES THAT WHILE GRINDING RIDGE OUT OF BRAKE DRUM,SMALL PIECES OF METAL ADHERED TO HIS HARD HAT AND HAIR AND EVENTUALLY WORKED INTO HIS EYE WHEN HE REMOVED HIS AFCE SHIELD AND G LASSES.SITUATION IRRITATED BY RUBBING EYE PRIOR TO 1ST AID.
EMPL STATED THAT SHE WAS CLIPPING GRASS WITH PAIR OF ELECTRIC GRASS CLIPPERS & CAUGHT MIDDLE FINGER IN BLADES.
355 DOZER WAS ATTEMPTING TO PULL A 992 LOADER WHEN THE LOADER SLIPPED DEEPER INTO A MUD HOLE. THIS INCREASED TENSILE PRESSURE, THE SHACKLE BROKE FROM THE 992 AND BROKE THE REAR SAFETY WINDOW O F THE DOZER. THE SAFETY GLASS STRUCK THE EMPLOYEE'S FACE AND EYES. RESULT GLASS IN ONE EYE (NOT EMBEDDED) AND 2 MINOR CORNEAL ABRASIONS.
EMP WA> GAS CUTTING SOME PIPE HE WA> WEARING PAIR OF HIGH TOP COWBY BOOTS PANTS WERE PULLED UP KMAKING A LEDGE ON TOP JOF BOOT AS THE PIPE WA> CUT A PC. OF SLAG LANDED ON LEDGE AND BURNED THROUGH AND DROPPED IN BOOT. SLAG CAUSED 2ND DEG. BURN TO L. FOOT AND ANKLE.
THE EMPLOYEE STATED THAT HE HAD BEEN GRINDING AND WELDING ON A NEW PUMP TRAILER AND LATER FOUND A METAL FOREIGN BODY IN HIS RIGHT EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AND A FACESHIELD WHEN INJURED.
WELDER WAS WORKING ON SURFACE MINER CUTTING LOOSE TEETH HOLDER WHEN A STEEL PLATE FELL ON HIM SUBCONTRACTORS EMPLOYEE FAILED TO BLOCK OR SECURE MATERIAL BEFORE CUTTING IT LOOSE
EMPLOYEE WAS ALLEGEDLY CHIPPING SLAG OFF OF A HOT WELD WHEN A FOREIGN OBJECT FLEW INTO HIS RIGHT EYE.