Buscar en el registro

EE WAS RIDING 3 WHEELER TO THE OUTSIDE AND A PIECE OF DRAW ROCK FELL STRIKING HIM ON LEFT SHIN.

EE WAS HOOKING A CHAIN UP TO PULL A PIECE OF DRAW ROCK OFF OF A JOY 14.10 MINER. MINER OPERATOR SWUNG MINER AROUND CATCHING HIM ACROSS CHEST WITH BOOM.

ROOF BOLTER OPR. WAS BETWEEN ROOF BOLTER AND RIB LINE WHEN A PIECE OF DRAW ROCK FELL FROM MINE ROOF HITTING EE ON HIS LEFT SHOULDER.

EE WAS OPERATING A SINGLE HEAD FLETCHER ROOF BOLTER IN THE 7 ENTRY. HE WAS DEADLING A TEST HOLE IN THE INTERSECTION. HE WAS TO GIVE DRILL STEEL OF THE HOLE WHEN HIS HEAD STEEL HUNG IN THE HOLE AFTER RE MOUND THE MIDDLE EXT. STEEL THE HEAD STEEL FELL FROM THE HOLE STRIKING EE ON HIS MIDDLE FINGER ON HIS LEFT HAND.

BOLTING ROOF IN #3 HEADING DRILL STEEL BROKE HITTING EE IN MOUTH

BOLTING ROOF, SMALL PIECE OF SLATE FELL HITTING MAN ON LEFT HAND.

MINER HELPER WAS STRUCK ON LEFT FEMUR BY BOOM ON 14CM10 MACHINE APPROX. 7.5" BELOW LEFT HIP JOINT.

PUTTING U ROOF BOLTS, WHEN A PIECE OF DRAW ROCK FELL OUT FROM BEHIND CANOPY HITTING MAN ON SHOULDER AND HIP

WHILE BOLTING ROOF, MAN WAS HOLDING DRILL STEEL, GLOVE CAUGHT IN STEEL, RESULTING IN SPRAIN TO RIGHT ARM.

A PIECE OF DRAW ROCK FELL FROM BETWEEN THE BOLTS AND STRUCK HIM ON THE LEG.

EE OPERATING ROOF BOLTER WHEN DRAW ROCK SLIPPED AND HIT EE IN RT LOWER BACK. EE STOPPED WORK ON 12/9/97/

PUTTING UP ROOF BOLT, GRABBED DRILL STEEL. STEEL HAD A SMALL SPUR ON IT. CAUGHT IN GLOVE, CATCHING HAND, RESULTING IN BROKE LITTLE FINGER ON LEFT HAND.

PUTTING UP ROOF BOLTS, GLUE WAS SITTING UP TO FAST. TRIED TO REMOVE ROOF BOLT, CAUGHT HAND BETWEEN DRILL AND ROOF.

EE OPERATING ROOF BOLTER. GLOVE WAS CAUGHT ON WRENCH AND EE WAS NOT AWARE OF IT. EE TURNED ROTATION ON.

EMPLOYEE WAS BOLTING ON A SLOPE /W TILTING TO THE RIGHT, WHE HE LET A&RS DOWN FROM THE TOP, DRILL SLIDE DOWN HILL BUMPING HIM ON HIS RIBS.

HE WAS OEPRATING A ROOF BOLTER, WHILE DRILLING A HOLE HIS FINGER GOT CAUGHT BETWEEN THE ROOF BOLTER HEAD ADN ARMS GOING TO THE HEAD.

EE WAS OPERATING A ROOF BOLTER ON 003 SECTION. HE WAS DRILLING A HOLE FOR SECOND BOLT IN A ROW 8' FROM FACE WHEN A PIECE OF DRAW SLATE MEASURING 3' X 5' X 4" FELL OUT AND HIT EE ON HIS LEFT L EG. ROCK WAS REMOVED AND EE WAS TAKEN TO HOSPITAL.

EE WAS SETTING BITS ON 12-3 MINER IN #4 ENTRYY PINNER CABLE WS HUNG ACROSS ENTRY OVER MINER PINNER OPERATOR WAS BACKING OUT OF # ENTRY. HE TURNED REELON AND THE CABBLE WAS PULLED DOWN STRICKI NG EE IN BACK OF NECK.

EE WAS OPERATING A ROOF BOLTER WHEN A PIECE OF ROCK MEASUIRN G12" BY 20" BY 1" FELL FROM BETWEEN THE BOLS IN THE ROOF AND HIT ON HIS LOWER LEFT HAND AND ARM THAT WAS RESTING ON THE MACHINE. H E WAS GIVENFIRST AID AND WAS RESTING ON THE MACHINE. HE WAS GIVEN FIRST AID AND TAKEN TOT HE HOSPITAL WHERE AN X-RYA SHOWED A CRACKED BONE IN WIRST.

INJURED A ROOF BOLTER OPERATOR ON THE 003 SECTION WAS DRILLING TEST HOLES WITH A FLETCHER ROOF BOLTER WHEN HE GOT HIS MIDDLE FINGER ON HIS LEFT HAND CAUGHT BETWEEN THE LIFT CYLINDER AND THE FRAME. THIS RESULTED IN HIM MASHING HIS FINGER SO BAD THAT THE DR. HAD TO REMOVE APPROXIMATELY 1 INCH OF HIS FINGER.

MINE SECTION GOING THROUGH A ROLL CAUSING UNEVEN MINE FLOOR CONDITIONS.EMPL TRAMMING THROUGH INTERSECTION WITH UNEVEN MINE FLOOR WHEN ROOFDRILL TRAMMED OVER UNEVEN PLACE AND BOUNCED CAUSING EM PL TO HIT NECK AND SHOULDER.EMPL CAME OUT AT 4PM AND REPORTED ACCIDENT.

I WAS HELPING ON BOLT MACHINE I PLACED BOLT IN HOLE HAD TO STRAIGHTEN OUT BOLT IN ORDER TO PUSH IT UP WHILE STRAIGHTENING BOLT IT TURNED & HIT IT WITH RIGHT SHOULDER.

MOVING RF BOLTER FROM BOLT BOLT PINNER HAD FLAT SLID OVER CAUGHT R LEG

EMPLOYEE WAS PINNING TOP AND HAD HAND ON PINNER WHEN ROCK DISLODGED FROM TOP AND STRUCK HAND.

EMPLOYEE WAS BOLTING ENTRY AND WAS PUTTING HIS BOLT UP WHEN DRAW ROCK FELL INBY PINNER. EMPLOYEE WAS PINNED AGAINST PINNER BY ROCK EMPLOYEE WAS TREATED AND TRANSPORTED TO SURFACE.

EMPLOYEE WAS WELDING WHEN SPARKS FROM THE METAL BURNT BOTH EYES ARC WELDER BURN

WHILE GETTING READY IN INSTALL LEFT ROOF BOLT IN SECOND ROW IN THIRD LWFT INTERSECTION,THE INJURED ROOF BOLTER OPERATOR PULLED ROOF BOLT UP AND THE JACK ON PINNER CAME IN CONTACT WITH HIS RIGF HT KNEE PUSHING IT INTO RIB.

EMPLOYEE WAS HELPING TO MOVE MINER TO NEXT OUT. EMPLOYEE WAS WATCHING CABLE AND HAD HUNG PULL ROPE ON MINER BOOM TAIL THEN TURNED TO WALK AWAY. PERATOR THEN TRAMMED MINER CATCHING EMPLOYEE AGA INST RIB INJURING LEFT LEG.

WHILE OPERATING NEW BOLTER MACHINE/ PINNER EMPLOYEE'S LEFT THUMB WAS CRUSHED AGAINST CANOPY JACK WHILE STEEL BOLT BENT EMPLOYEE'S THUMB UP TO THE KNUCKLE HAD TO BE AMPUTATED

LEFT LITTLE FINGER CAUGHT IN GRINDING WHEEL FROM FIRST JOINT TO EEND OF FINGER AND RIGHT LITTLE FINGER SECOND JOINT DAMAGED.

WHILE INSTALLING THE FOURTH BOLT IN THE ROLL, HE CAME IN FRONT OF PINNER AND GOT MARKING STICK AND TURNED AROUND AND THE ROCK FELL, PUSHED THE JACK OUT ON THE RIGHT SIDE OF PINNER. THE ROCK F ELL IN BETWEEN THE THIRD AND FOURTH JACK AD BETWEEN THE FIRST AND SECOND ROW OF JACKS.

EMPLOYEE WAS SQ6ATTING WHILE BOLTING ROOF WHEN KNEE CAME OUT OF PLACE

WHILE PUTTING R2OF BOLT UP, SAFETY JACK FELL OVER AND STUCK RING FINGER OF LEFT HAND. CUT HIS FINGER.

BOTH KNEES OF E4PLOYEE WERE CAUGHT BETWEEN PINNER MACHINE AND RIB CAUSING ABRASIONS AND CONTUSIONS OF BOTH KNEES

OPERATOR TURNING ROOF BOLTER AROUND AND HIS LEFT FOOT WAS CAUGHT BETWEEN ROOF BOLTER FOOT JACK AND A ROCK ON BOTTOM.BRUISING LEFT FOOT AT ANKLE.