Buscar en el registro

EE was installing a roof bolt on the corner of a newly created intersection. While pushing the bolt in the drilled hole and straightening the bolt out, he felt pain in his lumbar area of his back.

While installing a roof bolt the employee accidently caught his right index finger between the plate and the roof.

Employee was tramming the dual boom bolter. He reached out to grab his cable and caught his hand between a pallet of block and the roof bolter.

Employee was spotting bolts in a loose roof area, along the rib. The drill steel helped dislodge a piece of rock that slid onto the driller's canopy and then off it and onto his left ankle. Rock was 27" long x 14" wide and 0-2" thick (employee worked restricted duty. Dr visit 1/4/08 another MRI showed fracture. Employee off).

While installing a roof bolt, left index finger got caught between roof bolt plate and drill head of roof bolter.

Employee was installing a roof bolt. While straightening the bolt the bolt slipped and the employee fell forward hitting the bolt with his mouth. He dislodged 2 top teeth and 2 bottom teeth.

While pushing up roof bolt employee placed hand on top of coupler and pushed wrong leaver causing bolt to cut left hand index finger.

WHILE PUSHING BOLT & PLATE UP TO THE ROOF BOLT, IT KICKED OUT & STRUCK BACK OF LT. HAND CUTTING RING FINGER & MIDDLE FINGER, REQUIRING STITCHES.

Ee was bolting when a piece of rock dislodged along the rib striking him on the hard hat and left shoulder. The rock measured 2" thick, 1" wide and 3' long.

EMPLOYEE WAS INSTALLING CABLE BOLTS WITH A DUAL BOOM BOLTER. WHILE PUSHING CABLE BOLT INTO THE ROOF THE EMPLOYEE EXPERIENCED PAIN IN HIS LEFT SHOULDER. EMPLOYEE DID NOT MISS ANY WORK UNTIL 8/24/04 ON WHICH DATE HE RECEIVED SURGERY ON HIS SHOULDER ROTATOR CUFF.

PRIOR TO MOVING TO THE NEXT PLACE TO BOLT THE OPERATOR & HELPER SHUT DOWN AND TALKED. THE OPERATOR STARTED THE MACHINE UP & DROPPED THE ATRS NOT KNOWING THE HELPER SAW HIS BOLT MEASURING ROD A GAINST THE FACE. WHEN THE T-BAR WAS RELEASED IT HIT THE HELPER IN THE LEFT BACK & SHOULDER AREA KNOCKING HIM FROM A CRAWLING TO A PRONE POSITION.

WHILE ATTEMPTING TO INSTALL A ROOF BOLT THE EMPLOYEE HAD A HOLD OF THE BOLT AND PUSHED THE WRONG LEVER SPINNING THE BOLT AND THE PLATE STRUCK THE EMPLOYEE ON THE RIGHT WRIST.

WHILE PUSHING A ROOF BOLT INTO THE ROOF IN A FALL AREA, USING A LONG BOLT TIGHTENING WRENCH THE OPERATOR WAS SPINNING THE BOLT TO MIX THE RESIN WHEN THE WRENCH CAME OFF THE HEAD OF THE BOLT AN D STARTED TO FALL WITH A CIRCULAR MOTION. THE OPERATOR STUCK HIS LEFT HAND OUT FOR PROTECTION AND THE STEEL HIT HIS HAND

DURING BOLT INSTALLATION THE MAN STRAIGHTENED THE BOLT INSERTING THE HEAD OF THE BOLT IN THE CHUCK OF THE BOLTER. HE STARTED SPINNING THE BOLT WHICH EVALENTLY HAD A BURR, WHICH CAUGHT HIS GLOV E AND WRAPPED HIS LEFT HAND GROUND.

WHILE BACKING MINOR OUT OF X CUT PINCHED FOOT BETWEEN MINER SEAT AND RIB.

THE EMPLOYEE WAS INSTALLING A 42" RESIN BOLT AND PLATE IN THE DRILLED HOLE. HE PUT 1/2 OF THE BOLT IN THE ROOF THEN STRAIGHTENED IT BY HAND, PUT THE HEAD OF THE BOLT IN THE CHUCK, STARTED TO P USH IT IN THE ROOF AND SPIN IT TO MIX THE RESIN.HIS CUFF ON HIS GLOVE CAUGHT THE PLATE AND TWISTED HIS HAND AROUND THE BOLT.

EE WAS PUSHING A BOLT UP WITH A BOLTER HEAD AND GOT FINGER BETWEEN HEAD OF BOLTER AND BOLT. CUT FINGER.

WHILE ROOF BOLTING KNEE SWELLED UP AND GOT SORE.

VICTIM WAS INSTALLING ROOF BOLTS. PINCHED FINGER BETWEEN BOLT PLATE & BOOM OF ROOF BOLTER.

EMPLOYEE WAS ROOF BOLTING AND GOT FINGER BETWEEN BOLT PLATE AND DRILL HEAD OF MACHINE.

AFTER INSTALLING A ROW OF BOLTS UNDER EDGE OF ROCK, EMPLOYEE MOVED MACHINE AHEAD A SHORT DISTANCE TO INSTALL SPOT BOLT. THE EDGE OF ROCK FELL, STRIKING BOLTER OOPERATOR WHILE HE WAS REACHING F OR DRILL STEEL. THE DRILL STEEL HIS HIS RIGHT HAND CAUSING SWELLING AND DISCOLORATION AS WELL ASA SMALL CUT.

WHILE INSTALLING A ROOF BOLT, MINER HAD MUD FLY OFF OF BOLT INTO HIS LEFT EYE.

WHILE ROOF BOLTING, A PIECE OF ROOF FELL, STRIKING EE ON RIGHT FOREARM.

INJURED WAS BOLTING HAD SET BOLTER TO DRILL WHEN A PIECE OF ROCK FELL FROM ROOF STRIKING BACK. PIECE OF ROCK WAS APP 38X38" 4" THICK TO OF EATHER EDGE CAUSING SPINAL FRACTURE LUMBAR REGION L.

INJURED WAS DRILLING HOLES IN ROOF WITH BOLTING MACHINE DRILL STEEL STRUCK IN ROOF AND HE RAN HEAD UP TO FREE DRILL STEEL AND CAUGHT LEFT THUMB BETWEEN DRILL HEAD AND ROOF SMASHING LEFT THUMB.

INJURED WAS ROOFBOLTING AND WAS GUIDING BOLT INTO HOLE WHEN GLOVE CAUGHT BOLT AS HE HIT ROTATION TWISTING RIGHT RING FINGER AND CAUSING PULLED TENDON.

WHILE INSTALLING A ROOF BOLT THE GLOVE ON THE RIGHT HAND CAUGHT ON A BURR ON THE BOLT WRAPPING THE RIGHT HAND AROUND THE BOLT DISLOCATING THE RIGHT THUMB

WHILE ROOFBOLTING ON HIS KNEES EMPLOYEE ALLEGES THAT HE TWISTED HIS KNEE CAUSING PAIN IN BACK OFKNEE.

INJURED WAS FINISHED BOLTING ON HIS SIDE AND WAS WAITING FOR THE OPERATOR ON THE OTHER SIDE TO DROP THE ATRS AND MOVE THE BOLTER FORWARD. WHEN APIECE OF ROCK MEASURING APPROX 0-18"WIDE, 3'LONG AND 0-6"THICK FELL FROM THE BROW, STRIKING THE EMPLOYEE ON THE NECK, SHOULDER, AND LEGS.

THE ATRS WAS SET AGAINST THE ROOF THE BOLTER OPERATOR LOWERED THE ATRS A COUPLE OF INCHES TO ENABLE INSTALLATION OF A CHANNEL A PIECE OF ROCK FELL BETWEEN THE ATRS & THIS LAST ROOF BOLT WHILE THE OPERATOR WAS ATTEMPTING TO INSTALE THE CHANNEL BREAKING HIS LEG

INJURED WAS POSITIONING ROOFBOLTER IN THE FACE WHILE LOOKING OVER THE OPERATOR'S COMPARTMENT. WHEN IT BECAME NECESSARY TO BACK UP, HE DID SO WITHOUT LOOKING, AND CAUGHT HIS HEAD BETWEEN THE CA NOPY AND AN OFFSET IN THE ROOF.

EMPLOYEE HAD JUST START ED DRILLIG HOLES FOR INSTALLATION OF 4FT RESIN BOLTS WHEN A PIECE OF ROCK APPROX 5FTX2FTX4IN TO 0 BROKE LOOSE NEAR THE RIB & STRUCK HIM ON THE BACK

EMPLOYEE WAS BEGINNING TO DRILL A HOLE WITH A FLETCHER TWIN BOOM BOLTER WHEN A PIECE OF LOOSE COAL FELL FROM THE ROOF AND STRUCK HIM ON THE HAND.

EMPLOYEE WAS BEGINNING TO DRILL A NEW HOLE FOR INSTALLATION OF RESIN ROOF BOLTS, AND WAS GUIDING THE STEEL WITH HIS HAND WHEN HIS GLOVE CAUGHT THE DRILL STEEL CAUSING AN INJURY TO HIS FINGER A ND HAND.

EMPLOYEE WAS DRILLING IN FACE OF 5RT SECTION WHEN THE DRILL STEEL BROKE CAUSING A SECTION OF THE STEEL TO FLY LOOSE & STRIKE THE EMPLOYEE IN THE ELFT CHEEK BONE REQUIRING 3 STITCHES

EMPLOYEE WAS USING A HAND-HELD GRINDER TO REMOVE SLAG FROM A PIECE OF METAL THAT HAD BEEN CUT WITH A TORCH WHEN IT "KICKED" SIDEWAYS HITTING HIM ON THE WRIST CUTTIN OUT A PIECE OF FLESH REQUIR ING SUTURES.

ROOFBOLTER CANOPY WAS APPARENTLY STOCK ON A BOLT AGAINST THE ROOF AND WOULD NOT LOWER. THIS OEPRATOR ACTUATED THE BOOM SWING AND THE CANOPY DROPPED STRIKING THE EMPLOYEE ON THE SHOULDER. EMP LOYEE WORKED ON 2-12- AND 2-13 AND MISSED 2-15 AND 2-16.

EMPLOYEE WAS EXPERIENCING PAIN IN HIS LWOER BACK AS HE WAS OPERATING THE LEE NORSE CONTINUOUS MINER AS HE CONTINUED LOASDING THE PAIN INCREASEDED TO THE POINT WHERE HE WAS NO LONGER ABLE TO O PERATE THE MAHINE & HAD TO BE TAKEN OUTSIDE

EMPLOYEE WAS INSTALLING A 42" RESIN BOLT. AS HE PUSHED THE BOLT UP, HE BEGAN TO ROTATE IT. HIS GLOVE SUDDENLY CAUGHT THE BOLT. RESULTING IN THE AMPUTATION OF HIS LEFT MIDDLE FINGER UP TO TH E 2ND JOINT.

EMPLOYEE HAD JUST FINISHED BOLTING ATURN ON A T CCUT AND WAS SQUARING THE ROOF BOLTER UP WITH A COAL FACE. AS HE WAS TURNING THE MACHINE, HE GOT HIS LEFT INDEX AND MIDDLE FINGER PINCHED BETWE EN THE BUMPER OF THE BOLTER AND THE COAL RIB.

BACKING BOLTER OUT STRUCK RIB PINNING L ARM BETWEEN RIB AND POST OF CANOPY

EE WAS ASSISTING THE MECHANIC WELDING ON THE JOY CONTINUOUS MINER AND EXPERIENCED A FLASH BURN OF HIS EYE WHICH LATER RESULTED IN AN INFECTION OF THE LEFT EYE.

INSTALLING 4 FT RESIN BOLTS EXPR PAIN IN LOWER BACK

EE WAS ROOFBOLTING A PILLAR SPLIT IN 3 EAST SECTION & WAS IN THE PROCESS OF INSTALLING A 4FT RESIN BOLT. EE WAS HOLDING THE RESIN BOLT IN HIS RIGHT HAND & SPUN THE ROTATION LEVER TO LINE HIS WRENCH UP WITH THE BOLT WHEN THE BOLT ENGAGED INTHE WRENCH. IT TURNED SUDDENLLY CATCHING HIS CLOVE & TWISTING HIS WRIST. THIS IS BEING SUBMITTED DUE TO A PART 50 AUDIT.

EE WAS HELPING ROOF BOLTER REMOVE A STUCK DRILL STEEL FROM MINE ROOF AND WRENCH SLIPPED CAUSING EE TO SMASH HIS LEFT INDEX FINGER.

EMPLOYEE WAS INSTALLING 4 FOOT ROOF BOLT WITH RESIN AND PUSHED THE BOLT UP INTO THE HOLE AND BEGAN SPINNING IT TO MIX THE RESIN. WHILE HE WAS SPINNING IT, SOME FOREIGN MATERIAL FLEW OFF FROM T HE DRILL HEAD AND ENTERED THE RIGHT EYE OF THE EMPLOYEE.

WHILE MOVING BOLTER TO PREPARE TO BOLT OPERATOR MOVED HAND TO TOP OF CANOPY TO SEE ATRS & BOLTER ROCKED OVER & LEFT HAND WAS PINCHED AGAINST ROOF