Buscar en el registro

WHEN AIR BLASTER WAS ACTIVATED, ROCKS HIT WINDOW OF DOZER WHICH BROKE CAUSING GLASS TO ENTER EE S EYE.

EE WAS CUTTING A STEEL PIECE OF METAL AND WHILE DOING SO THE OTHER PIECE FELL OFF TABLE AND HIT HIS LEFT FOOT.

EE CUTTING METAL WITH A TORCH WHEN HOSE CAME OFF CUASING BURNS TO LOWER LEFT ARM & ABDOMEN AREA

WHILE CUTTING A BOLT WITH A BLOW TORCH, BURNED LEFT HAND,WRIST, AND FOREARM

WHILE CUTTING WITH TORCH SLAG, EMPLOYEE BURNED THROUGH PANTS AND BOOT BURNING LEFT FOOT.

EE WAS REACHING OVER THE TOP OF A FEED CHUTE TO INSERT A BOLT WHILE ANOTHER EE WHO WAS NOT AWARETHAT HIS HAND WAS IN THAT AREA, PASSED A LIT TORCH OVER THE BACK OF IT BURNING HIS HAND

WHILE REMOVING A WINGED HOPPER, THE SCREEN FELL AND STRUCK EE'S RT FOOT.

EE WAS USING A HAND GRINDER CLEANING UP STEEL PLATE WHEN HE WAS STRUCK BY A STEEL CHIP IN THE LEFT EYE.

EE WAS GRINDING ON METAL SURGACE WHEN METAL PIECE RICOCHED INTO HIS EYE.

EE WAS PUSHING MATERIAL INTO A PILE WHEN HE TWISTED HIS BACK.

EMPLOYEE WAS STANDING NEXT TO A CO-WORKER THAT WAS WELDING AND RECEIVED FLASH BURN IN HIS EYES.

EE BENT OVER TO CHECK 4" WATER PUMP, BEARING WHEEL BROKE ON BEARING & HOT GREASE FROM BEARING BLEW ONTO HIS FACE.

EMPLOYEE WAS GREASING U-JOINT ON LOADER WITH PRESSURIZED GREASE GUN. THE NEW GREASE UNDER PRESSURE FORCED THE OLD GREASE TO SHOOT OUT INTO HIS EYE.

EMPLOYEE WAS USING TORCH TO CUT STEEL ON FLUME LINE WHEN TORCH POPPED AND BURNT LEFT HAND.

EE WAS DIRECTING THE CRANE OPERATOR IN LIFTING CONVEYOR'S COUNTERWEIGHT WHEN THE WEIGHT BECAME UNBOUND AND SWUNG OVER AND PINCHED HIS ANKLE BETWEEN THE COUNTER WEIGHT FRAME AND COUNTERWEIGHT.

WHILE TRYING TO REMOVE LOCKING PIN, THE HOPPER WAS BEING LIFTED BY A MECHANICAL SHOVEL. THE EE GOT HIS FINGER CAUGHT BETWEEN THE PIN AND THE HOPPER.

HOIST CABLE ON DRAGLINE BROKE. THE CABLE FELL DOWN THE BOOM AND STRUCK EE IN THE FACE.

EMP WAS UP ON DUST SILO SHUTTING OFF VALVE WHEN THE AIR LINE BROKE BLOWING DUST PARTICLES INTO HIS FACE AND EYES.

WHILE LOWERING TOOTH ON CHAIN TO UNPLUG JAW CRUSHER, MATERIAL MOVED, PULLING CHAIN DOWNWARD CAUSING HAND TO HIT I BEAM, FRACTURING RIGHT THUMB.

EMPLOYEE WAS HOOKING UP RIGGING (LARGE SHACKLE) TO OVER-HEAD CRANE BLOCK WHEN HIS RIGHT THUMB BECAME SMASHED/PINCHED BETWEEN TWO OBJECTS. EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 4-12-96.

EMPLOYEE WAS WELDING IN A AWKWARD POSITION AND A DROP OF HOT METAL FELL INTO HIS BOOT BURNING HIS LEFT FOOT. EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 2-15-96.

EE WAS ON TOP OF PIT BANK PUSHING MATERIAL OFF A WALL WHEN THE WALL COLLAPSED UNDER THE MACHINE HE WAS OPERATING. IN THE ACCIDENT HE STRUCK A MIRROR MOUNTED INSIDE THE CAB AND HIS LEGS STRUCK THE CONTROL LEVERS AND PANEL CAUSING BRUISES TO BOTH LEGS AND A CUT ABOVE HIS RIGHT EYE.

CRANE OPERATOR EXTENDED BOOM WITHOUT LOWERING LOAD BLOCK. HE CONTINUED TO EXTEND BOOM UNTIL THE LOAD LINE BROKE STRIKING EE IN THE BACK.

WHILE EE WAS CUTTING BROKEN ADAPTOR OFF CAT WITH TORCH, HE WAS HIT BY CHEST PAINS.

GRADUAL ONSET OF BACK INJURY FROM OPERATING A DOZER & OTHER HEAVY EQUIPMENT OVER A PERIOD OF 26 YEARS.

EMPLOYEE WAS WELDING IN ROCK HOPPER USING AIR CHIPPER AND THE AIRBORNE DUST FROM THE CHIPPER FLEW INTO HIS RIGHT EYE.

WHILE WELDING UNDER SCREEN, DUST OR STEEL PARTICLE FELL INTO EE'S RT EYE.

EMPLOYEE WAS REMOVING A STEEL PLATE FROM A SHAKER SCREEN AT THE ROCK PLANT USING A CUTTING TORCH. WHEN CUT THROUGH, THE PLATE FELL, MASHING, & BREAKING THE TIP OF THE MIDDLE FINGER OF HIS LEFT HAND.

EE WAS REMOVING WEAR SEGMENTS FROM 988B BUCKET WITH A 1" IMPACT AIR GUN. THE PLOW BOLT FELL OUT OF KEYED SLOT AND STARTED SPINING WHICH CUT HIS ARM (WRIST).

EE WAS HOLDING A STEEL PLATE IN PLACE WHILE ANOTHER EE WAS WELDING, HIS ELBOW HIT THE WELDING TORCH CAUSING OXYGEN TO ESCAPE FROM THE WELDING SPARKS. THIS CAUSED THE TORCH TO BURN HIS LEFT ARM .

EE WAS WORKING WITH A HYDRAULIC PRESS TO REMOVE SHAFT FROM A BEARING. UNEXPECTED MOVEMENT OF THE JACK ASSEMBLY WHILE BEING INSTALLED INTO POSITION CAUSED EE'S FINGER TO LODGE BETWEEN THE BOLT AND PLATE ASSEMBLY CUTTING THE TIP OF HIS RIGHT FINGER.

TRYING TO REMOVE THE DRIVE SHEAVE FROM THE NEW ASH 12 X 14 PUMP. THE EARS OF THE BUSHIN GHA DBUSTED OFF AND THE EMPLOYEE WERE USING APORT A POWER AND PULLER TO TRY TO REMOVE THE SHEAVE. ONE OF THE BOLTS ON TE PULLER BROKE SHOOTING THE BOLT END OUT AND STRIKING ELMPLOYEE IN THE RIGHT CHIN.

EMPLOYEE WAS HAVING DIFFICULTY GETTING A GROUND ON THE PIECES HE WAS WELDING SO HE RAISED HIS DARK LENS TO SEE WHAT THE PROBLEM WAS. AT THAT TIME THE WELDING ROD ARCHED BURNING BOTH OF HIS EYE S.

EMPLOYEE WAS PULLING ON V-BELT AND WATCHING A FELLOW EMPLOYEE EMPLOYEE ASSISTING HIM.HIS HAND GOT TOO CLOSE THE THE PULLEY AND WAS DRAWN IN EQUIPMENT WAS DEENERGIZED AND LOCKED OUT PROPERLY.

WHILE REPAIRING WATER LINE NEXT TO SCREEN A COBBLE ROCK APPROX 8" IN DIAMETER BOUNCED OFF AND FELL 12 TO 14 FEET AND STRUCK IN LOWER BACK.

EMPLOYEE WAS CITTOMG WOTJ AOR ARC - STOPPED TO REPOSTION CABLE LEAD, TURNED TO STRUCK AN ARC WITH THE AIR ARC ROD AGAINST TRUCK BED, CAUSING VIEW OF EYE WITHOUT EYE PROTECTION.

WHILE CUTTING METAL WITH A CHOP SAW, SPARKS RICOCHETED OFF HARD HAT INTO LEFT EYE.

EMPLOYEE WAS HOLDING UP GUARD WITH LEFT HAND AND PROCEEDED TO WELD GUARD BRACKET. HE FLICKED WELDING HELMET DOWN; BUT BEFORE IT COVERED HIS EYES, THE WELDING ROD ARCED AGAINST TRUCK BODY.

EMPLOYEE WAS MAKING A LEFT TURN WHEN THE BOB CAT STARTED TO BOUNCE. AT THAT TIME HE COUGHED. THIS CAUSED HIS MUSCLES TO TIGHTEN UP.

DR'S FIRST MEDICAL REPORT NOT RECEIVED UNTIL 10-9. EMPLOYEE WITH THE HELP OF ANOTHER EMPLOYEE WAS REPLACING A SKIRT ON THE FEEDER WHEN THE OTHER EMPLOYEE ACCIDENTLY RAN A LIT OXY-ACT TORCH OV ER THE EMPLOYEE'S RIGHT HAND BURNING HIS 3RD, 4TH, AND 5TH FINGERS ON THAT HAND.

WELDING ON BASE HOPPER AND A HOT SPARK GOT INTO THE EAR.

GRINDING INTERRIDGE FROM BRAKE DRUM OFF TRUCK PC OF SLAG ENTER L EYE

FINISHING HOLE REACHING DRILL CONTROLS STRUCK ON R CALF BY ROCK ROLLED DOWN THE SLOPE

TAKING LUG NUTS OFF TRK TIRE IMPACT WRENCH SLIPPED CAUGHT LEFT RING FINGER CUTTING TIP TO BONE.

HOLDING HEAD OF CUTTING EDGE BOLT LOCKED IN PLACE IMPACT WRENCH ON NUT CAUSED BOLT TO SPIN AND CUT THROUGH GLOVE IN PALM OF R HAND

PUT L INDEX FINGEWR IN SOCKET OF IMPACT WRENCH, HE TRIGGERED IT NUT LODGED IN FINGER

LYING ON BACK GRINDING OVERHEAD WITH SAFETY GLASSES ON, ELMPLOYEE REPORTED TO EMPLOYER THAT HE THOUGHT HE HAD SOMETHING IN HIS EYE BUT IT WAS NOT SERIOUS, LATER IN THE WEEK HE WENT TO HIS DOCT OR.

EMPLOYEE STATED WHILE WORKING WITH JACKHAMMER, CLEANING OUT BUCKET ELEVATOR, RAISED JACKHAMMER ADN STRUCK THUMB AGAINST ELEVATOR BUCKET.

PARTICLES IN AIRE FROM T.D.FAN LODGED IN RIGHT EYE.

EMPLOYEE WAS REACHING UP TO GET A LIGHTED ACETYLENE TORCH WHICH WAS BEING PASSED TO HIM BY ANOTHER EMPLOYEE. THE HOSE WAS KINKED AND WHEN IT UNTWISTED THE TORCH SPUN AROUND BURNING EMPLOYEE.