Buscar en el registro

PULLED A DRILL STEEL OUT OF HOLE AND PINCHED RIGHT INDEX FINGER BETWEEN STEEL AND DRILL CHUCK. FRACTURED TIP OF FINGER.

HELPER ACCIDENTLY HIT LEVER IN WRONG DIRECTION CAUSING THE WRENCH TO SWING AROUND STRIKING EE IN THE FACE.

USING A BLOWPIPE TO CLEAR AREA. HOSE KINKED EE PULLED ON HOSE KINK STRAIGHTENED AND SURGED CAUSING THUMB TO BE STRUCK BY HOSE. FX TIP OF THUMB.

EE CLAIMS THAT WHILE RINGDRILLING THE COUPLER ON DRILL ROD HIT BOTTOM OF CENTRALIZER AT AN ANGLE AND COUPLER STARTED TO CHIP OFF METAL WHILE DRILL WAS ROTATING AND METAL CHIPS HIT EE IN FACE, /FRAGMENT IN EACH CHECK.

EE STEPPED DOWN FROM A D-9 DOZER WHILE CARRYING AN AIR OPERATED IMPACT WRENCH WITH A BOLT AND BRACKET STILL IN THE SOCKET. AS HE STEPPED DOWN, THE EE ACCIDENTALLY PULLED THE TRIGGER ON THE IMP ACT WRENCH WHICH CAUSED THE SOCKET WITH THE BOLTAND BRACKET STILL IN THE SOCKET TO TURN IN THE EES HAND, CAUSING A LACERATION TO HIS LEFT HAND.

EE CLAIMS HE WAS DRILLING A UP HOLE AT LINE 10 24N WHEN MACHINE CAME OFF THE STEEL, MACHINE FELL AND LEG BOUNCED UP. STINGER CAUGHT HIM JUST BELOW RIGHT KNEE CAUSING BRUISE. EE RESTRICTED WORK DAYS WERE 12-22,23 AND 28,1998.

EE CLAIMS WHILE WORKING ON #1 REGRIND BLANKINGS OF GRATES, HE WAS WORKING ON A CONFINED AREA CAUSING OVER EXERTION TO RIGHT SHOULDER.

EMPLOYEE CLAIMS HE HAD FINISHED DRILLING A DOWNHOLE AND AS HE WAS BLOWING OUT THE HOLE A ROCK BLEW OUT OF THE HOLE AND HIT HIS ON THE MOUTH LOOSENING HIS TOOTH.

WHILE DRILLING WITH JACK LEG, EE CLAIMS THAT WHEN THE DRILL STEEL BROKE, THE JACK LEG JERKED TO THE RIGHT & CAUSED HIS BACK TO TWIST. [ON 4/19/96 EE WENT TO DR & WAS REFERRED TO PHYSICAL THERA PY]

EMPLOYEE WAS BOLTING OFF A SCISSOR LIFT TRUCK, PUSHING A DYWIDY BOLT INTO A HOLE WHEN STRINGER OF DRILL SLIPPED INTO HOLE IN RANK FLOORING, TWISTING HIS BACK. REPORTED IMMEDIATELY AS A BACK ST RAIN WITH NO LOST TIME. DIAGNOSED AS HERNIA ON 2-28, ACCEPTED AS ON-THE-JOB INJURY ON 3-6.

EMPLOYEE CLAIMS THAT WHILE RUNNING THE SUCTION HOSE OF A PORTABLE AIR PUMP, HE FELT A TUG AS THE HOSE BECAME TANGLED IN THE AGITATOR SHAFT. THE PUMP ALLEGEDLY WAS JERKED TOWARDS THE TANK AND P INNED EMPLOYEE'S KNEE AGAINST THE RAILING'S CORNER POST.

WHILE LOADING PIPE INTO HOLE, PIPE FUSION MACHINE PIPE TRIM CUTTING WHEEL FELL INTO OPERATING POSITION FALLING ON L. BUTLERS FINGER.

EMPLOYEE STATED: WHILE USING A VACUUM CLEANER TO CLEAN UP SOME BROWN GLASS IN A TRUCK, A PIECE OF GLASS POP UP AND WENT INTO HER RIGHT EYE.

EMPLOYEE WAS USING ACETYLENE TORCH TO CUT OFF A SECTION OF I-BEAM. AS BEAM WAS CUT THROUGH, IT SNAPPED BACK JARRING THE LEFT ARM AND SHOULDER.

INJURED WAS DRILLING ROCK HOLES.DRILL STEEL MADE CONTACT WITH EXISTING SPLIT SET BOLT,CAUSING A SUDDEN JERK.

WHILE TRYING TO TAKE THE COLLAR OFF OF THE STUCK, DRILL STEEL, A PIECE OF SLAB (APPROX 10"X6") CAME LOOSE FROM THE FACE, STRIKING HIM ON THE LEFT, BACK SIDE OF HEAD, JUST ABOVE THE NECK AREA.

DRILLING WITH JACKLEG TURNED OFF AIR HAMMER STAYED HUNG UP PULLING IT CAME LOOSE CATCHING HIS FINGER

BOLTING ROCK FELL IT JUMPED FROM MACHINE KNEE PAINFUL

WELDING, FLASH BURN TO BOTH EYES

THE EMPLOYEE GOT A PIECE OF MOLTEN SLAG IN HIS RIGHT EYE WHILE WELDING OVERHEAD N A LOADER IN THE MINE MAINTENANCE SHOP. THE EMPLOYEE DID NOT SEEK TREATMENT UNTIL THE FOLLOWING DAY AND WAS PL ACED ON RESTRICTED DUTY.

EMPLOYEE CLAIMS THAT HE SUSTAINED A BURN ON HIS LEFT FORE ARM WITH STEAM. EMPLOYEE STATED THAT HE UNTIED THE STEAM LINE FROM 10' CARBONATE ODS PUMP BOX UNIT. WHEN HE MOVED THE HOSE IT JUMPED O FF HIS HAND DUE TO STEAM PRESSURE BUILD UP IN THE HOSE. THE BUILD UP OCCURRED AS A RESULT OF A KINK ON THE HOSE. AS THE HOSE FELL, IT CAUGHT EMPLOYEE ON THE LEFT ARM.

EMPLOYEE WAS CLEANING OUT PLUGGED CHUTE WITH AIR LANCE, (AT #1 TRANSFER HOUSE/DECLINE BELTS) WHEN DIRT/FOREIGN MATTER ENTERED LEFT EYE.

EMPLOYEE WAS WORKING IN THE MANBASKET OF A ROOF BOLTER. AS THE BASKET NEARED THE BACK THE FRONT BASKET BOOM CYLINDER PIN GUSSETS BROKE AT THE WELDS. THE BASKET THEN FREE FELL 23 FEET TO THE GR OUND. EMPLOYEE STAYED IN THE BASKET AND WAS INJURED UPON IMPACT WITH THE BASKET.

PREPARING TO LIFT MOVE 24 FT TRAILER, WITH OVERHEAD CRANE FRONT END SWUNG SIDEWAYS STRIKING PINNING EMP AGAINST CELL BARGE. TAKEN TO ER. DR DETERM INTERNAL BLEEDING CAUSED BY LACERATED LIVER.

EE WAS USING BLOW PIPE AT THE 25-A 14E CHUTE, WHEN GLOW PIPE CAUSED HIM TO STRIKE HIMSELF AGAINST THE OPPOSITE CHUTE CAUSING INJURY TO RIGHT RIBS EE REGULAR JOB WAS MOTORMAN HE WAS ASSISTING T HE CHUTE PUTTER CLEAR A CHUTE.

APPROACHING TRANSFORMER TO RELEASE TRAILNG CABLE SAFETY CHAIN AS JUMBO DRILL BACCKING OUT OF HEADING AS THE JUMBO ROUNDING JPILLAR CORNER SAFETY CHAIN BROKE ALLOWING TRAILING CABLE TO SGRIKE V ICTIM IN KNEE.

PREPARING TO CLEAN OUT LIFTER HOLE OF DRILLED FACE ROUND WHILE DRILL JUMBO OPER. WAS POSITIONING R. BOOM FOR DRILLING BACK HOLE WHEN BOM CONTACTED FACE IT DISLODGED SOME MEDUIM SIZED ROCKS FRO M FACE AND ROCK STRUCK EMP ON HEAD. EMP WA> WEARING SKULLGARD HAT SHELL WAS CRACKED.

EMPL WAS SCALING ON RIGHT RIB A LARGE ROCK FELL ON THE END OF THE BOOM THE WEIGHT OF THE ROCK OLWERED THE FRONTOF THE SCALER AND RAISED THE REAR END OFF THE GROUND A FEW TIMES UNTIL THE ROCK F ELL OFF EMPL WAS JOLTED AS THE SCALER WAS BOUNCED AROUND ON 11-4-88 EMPL WAS SEEN AT OUR INHOUSE CLINIC AND WAS GIVEN A PRESCRIPTION FOR PAIN

EMPL WAS DRIVING THE R-10 ATLAS COPCO BOLTER INTO THE MINE MAINTENANCE SHOP HE DROVE OVER A BUMP IN THE ROAD AND HIS R KNEE STRUCK THE BOTTOM OF THE DASH RESULTING IN A BRUISED KNEE CAP HE CON TINUED TO WORK REGULAR DUTY UNTIL 10-12-88 WHEN FLUID WAS DRAINED FROM THE KNEE AND HE WAS PLACED ON RESTRICTED DUTY

EMPLOYEE CLAIMS THAT HE CHIPPED A CORNER EDGE APPROX. 3/32INCH OF FRONT UPPER TOOTH WHILE CHIPPING SLAG OFF THE EDGE OF A PIPE WITH A CHIPPING HAMMER. EMPLOYEE CONTINUED WORKING AND WILL HAVE THE EDGE SMOOTHED OUT AT A LATER DATE AT HIS CONVENIENCE NO LOST TIME, NO IMMEDIATE MEDICAL OR DENTAL ATTENTION WAS REQUIRED.

EMPL USING CUTT3NG TORCH TO CUT HOLE IN FLOOR OF 540 LOADER.WHEN TORCH WAS DROPPED,EMPL TRIED TO CATCH IT AND MISSED,BURNING BACK OF HAND.

EMPLOYEE WAS IN3THE PROCESS OF RAISING THE MAN BSKET,WITH A BOLT ALONGSIDE,WHEN THE TOP OF THE BOLT CLEARED THE CANOPY ABOVE THE BASKET THE END OF THE BOLT SWUNG TOWARD HIM AND STRUCK HIM IN T HE MOUTH CHIPPI3G HIS TEETH.

EMLOYEE AND HIS3PARTNER WERE REMOVING WEAR PLATES FROM THE BOTTOM OF ROUGHER CELLS BY WELDING A PAD EYE TO WEAR PLATE AND HOISTING THEM OUT WITH AN OVERHEAD CRANE.EMPLOYEE WAS INSIDE CELL AFTE HAVING ATTACHED3A CHOKER & CLEVIS TO THE PAD EYE.HIS PARTNE HOISTED THE CHOKER TO SNUG IT UP.AS EMPLOYEE WAS GETTING READY TO GET OUT OF THE CELL,THE WELDING BROKE,THE CHOKER SLING SHOT.STRIK

OPERATOR SUFFER9D NECK AND BACK PAIN AFTER PROLONGED OPERATION OF THE MECHANICAL SCALER OPERATOR MUST LEAN FORWARD AND EXTEND THE CHIN TO OBSERVE OERHEAD SCALING

MINER WAS DRILL3NG H OLES FOR BOLTING PURPOSES HE WAS DRILLING HOLES FOR 2ND ROW OF BOLTS FOR STRIP OF WIDE MESH WHEN A PIECE OF ROCK CAME DOWN & STRUCK HIM ON HAT & RIGHT SIDE OF BODY LACERAT ED BRIDGE OF NO8E BRUISED RT SHOULDER & RT LEG

I.NAME & I.NAME3HOISTING MATERIAL UP TO WORK AREA IN 27B #11 RAISE.I.NAME AT CONTROLS OF TUGGER,I.NAME RECEIVING MATERIALS UP IN THE RAISE.WHEN MATERIALS GOT TO I.NAME HE ATTEMPTED TO GUIDE MA TERIALS AND GOT3FINGER IN SHEAVE BLOCK.

EMPLOYEE WAS DR3LLING FOR 6 FT PONY SET. AS HE WAS PULLING OUT O F HOLE HE HAD JUST DRILLED THE JACK LEG HIT HIM ON RIGHT SHOULDER AND RIGHT SHOULDER HIT RIB RIGHT SHOULDER BRUISED.

EMPLOYEE WAS US3NG AN AIR LANCE TO RELIEVE A BRIDGE OVER IN THE #1 CERIUM DRYER FEED BIN WHILE TRYING TO PUSH THE AIR LANCE THRU THE CERIUM SHE FELT A PAIN IN HER LOWER ABDOMEN SHE HAD A NON-I NDUSTRIAL RELAT9D HERNIA IN THE SAME AREA IN JAN. OF 1981 SHE HAD IT REPAIRED AND THIS APPEARS TO BE AN AGGRAVATION OF THE OLD INJURY

EMPLOYEE WAS DR3LLING HOLES TO BLAST FOR 4 FT PONY SETS IN PANEL 27B. AS HE WAS DRILLING A PIECE OF ROCK FELL OUT OF THE BACK STRIKING EMPLOYEE, RESULTING IN INJURY.

EMPL TRYING TO 2OLD SPRAG FROM SLIDING WITH HIS FOOT.WHILE SPRAGGING MUCKER BACK ON TRACK.SAFETY PIN ON BUCKET CAME OFF BUCKET HIT EMPL ON HEAD.SLIGHT CONCUSSION BUT NO IMPAIRMENT.

EMPLOYEE CLAIMS3HE WAS INSTALLING A BOLT IN 4INX4IN MESH AT THE UNDERCUT LINE 7( PANEL 27 HAULAGE LEVEL WHEN A ROCK CAME THROUGH THE MESH & STRUCK HIM ON THE TOOTH

EE CLAIMS HE W5S DRILLING TO INSTALL BOLTS & A STRIP OF WIRE AT THE AHULAGE LEVEL 16 X0 15 ACESS SOUTH & 15 SOUTH LADDER WHEN A SMALL SLAB-ROCK-CAME DOWN STRIKING THE JACKLEG ROLLED DOWN THE LEG & STRUCK H3M ON HIS LEFT KNEE LEFT SIDE.

EMPLOYEE CLAIMS THAT WHILE HELPING WELDER REPAIR MAIN POCKET AT THE DECLINE HE GOT FLASH BURN ON LEFT EYE.

WHILE MUCKING AT THE GRIZZLY LEVEL, PANEL 28, HE GOT ROCK IN HIS RIGHT EYE. HE HAD SAFETY GLASSES ON.

EMP WAS HELPING INSTALL BOLTS TO HANG A FAN FOR THE LUNCHROOM AT #2 WEST HAULAGE LEVEL, WHEN WITNESS I.NAME LOST CONTROL OF THE DRILL WHEN THE CHUCK-TENDER CAME OFF THE DRILL STEEL. THE MACHIN E HIT HIM AND KNOCKED HIM DOWN AND CUT HIS LEFT EYELID. THE SPRING HAD JUST BEEN CHANGED IN THE CHUCKTENDER

WHILE DRILLING PIN HOLES IN SLAB AT 2 SHAFT, BATCH PLANT, TO BE USED AS BRACING PINS AND AS HE WAS DRILLING THE DRILL STEEL HUNG UP CAUSING THE HAMMER TO SPIN AROUND WHICH STRUCK HIM.

EMPL DRILLING HOLES IN FACE ON 28 S HAULAGE LEVEL,AS HE PULLED MACHINE OUT OF HOLE HE FELT PAIN IN LEFT ARM.AS SHIFT CONTINUED ,HIS HAND HAD A TINGLING SENSATION AND ARM WAS WEAK.

EMPLOYEE CLAIMS HE WAS USING GRINDER ON TRUCK #404 WHEN A PIECE OF STEEL FLEW AND HIT HIM ON THE LEFT EYE.

EMPLOYEE CLAIMS HE WAS USING A BLOW PIPE IN THE PONY SETS, AS REQUIRED AT PANEL 26-A HAULAGE LEVEL AND TWISTED HIS RIGHT WRIST

EMPLOYEE CLAIMS HE WAS DRILLING UP RAISE ON LINE#5, PANEL 26-A, GRIZZLY LEVEL, WHEN DRILL STEEL CAME DOWN AND HIT HIS RIGHT TOE.