Buscar en el registro

Employee was grinding a piece of metal when the end fell the off grinding table and the employee attempted to catch it heard a "pop" in left shoulder.

Employee was repairing bent leg of dredge suction cage and was heating it with a torch. Second employee reach to move it and grabbed the hot piece of metal with employee's bare hand, Employee received Less than 1% second degree burns to employee's right hand.

EE was grinding a piece of metal and a piece of metal went into left eye. Ths claim was reported due to the fact the pieces had to be removed from the eye. There was no lost time

EE was drilling a road sign post, when the bit caught, twisting his hand and breaking the bones in right hand to the little and ring fingers. Released to light duty, transferred to light duty position until further medical evaluation.

EE was using cutting torch to cut a piece of metal. The metal was not secured and after it was cut it fell off the bench onto EE's right foot. EE had X-ray and returned to regular duties on 1/13/06. EE called in on 2/13/06, stating he was having problems with his foot. 2/13/06 would be the first day lost due to his injury. Release form is on file for 1/13/06.

Operator was stating boat motor, put motor in reverse and it jumped, cutting operator on left elbow

Employee was cutting grass with a weedeater eater and he pulled his back.

WORKING ON HAMMER MILL, HAMMER STARTED TO SPIN, HOLDING ON TO IT TO PREVENT CO-WORKER FROM GETTING INJURED, PINCHED LEFT THUMB. CUT L THUMB IN 2 PLACES

EE TRIED TO INSERT A PAN INTO LA MACHINE WITHOUTTURNING MACHINE OFF. THE MACHINE CAUGHT EE'S HAND/ARM & PULLEDEE. HAD TO SNATCH HIS ARM OUT OF MACHINE. RESULTS WERE INJURED HAND & ARM

EMPLOYEE WAS WIRE BRUSHING METAL WITH AN ELECTRIC GRINDER. IT CAUGHT IN ONE OF THE BOLT HOLES AND KICKED BACK, HITTING HIS RIGHT HAND.

MAKING HYDRAULIC HOSE, MOVED FAN, SOMETHING FLEW INTO LEFT EYE.

EE WAS STANDING PICKING WOOD FROM CONVEYOR BELT WHEN A ROCK FROM A NEARBY SCREEN TOWER STRUCK HER IN FRON OF LEFT SHOULDER.

WAS GRINDING & GRINDER CAUGHT ON PIECE OF METAL CAUSING IT TO KICK BACK, HITTING ARM WHILE STILL RUNNING.

WAS CLEAN GRINDING FOR A WELDING REPAIR IN SIDE HOPPER WITH FACE SHIELD. DUST GOT INTO OPERATOR'S EYE.

EE WAS GRINDING STEEL FLANGE WITH 71/4" HAND HELD GRINDER. DISK BINDED KICKING BACK AND CURTINE LEFT WRIST.

WHILE CHECKING A BELT ON THE POWERSCREEN A ROCK ROLLED BACKWARDS DOWN BELT PINNING SMALLEST FINGER ON LEFT HAND AGAINST SAFETY SHROUD CUTTING FINGER AND BREAKING THE BONE.

AFTER PULLING WATE TRUCK OUT OF HOLE I WAS TRYING TO UNHOOK CABLE FROM GRADER THE CABLE BINDED UP WITH CLEVIS PIN WOULD NOT UNFASTEN. THE GRADER DRIVER PROCEEDED TO MOVE FORWARD AND CABLE BRO KE SWINGING AROUND AND HITTING ME IN THE RIGHT LEG THROWING ME IN ROAD.

EE WAS CUTTING METAL WITH A GAS TORCH AT CHEST LEVEL WHEN THE METAL WAS CUT INTO ON ONE END, ITFELL HITTING EE IN THE RIGHT FOREARM.

HOLDING METAL PLATE WHILE ANOTHER EE WAS DRILLING A HOLE IN IT. METAL PLATE TURNED, GOUGING FINGER.

PINCHED LEFT INDEX FINGER AND THUMB UNDER PISTON OF AIR GREASE GUN.

EMPLOYEE WAS GRINDING WELD, GRINDING WHEEL KICKED BAKC AND CUT HAND BETWEEN PIMLEY AND RING FINGER.

EE WAS GREASING SEAL WATER PUMP - GREASE GUN HOSE CAUGHT ON ROTATING COUPLING-THIS PULLED GUN & HAND INTO COUPLING GUARD. INJURED BACK OF LEFT HAND.

TWO WELDERS WORKING ON BUCKET BACK TO BACK. ARC FLASHED INSIDE WELDING HELMET CAUSING FLASH BURN ON EYES.

USING AIR IMPACT WRENCH TO REMOVE 3/4IN H NUT THE NUT ST RIPPED METAL & RUST FLEW FROM THE SOCKET A SMALL METAL FRAGMENT WENT INTO RIGHT EYE

WELDING.

XX CLEANING OUT SUCTION SOMETHING GOT IN LEFT EYE WHILE CUTTING

RE,MOVING ROCK WAS BLOCKING ENTRANCE TO CRUSHER ROCK ROLLED BACK CAUGHT FINGER BETWEEN ROCK & FEEDER PLATE

CUT THUMB ON LEFT HAND WITH BANDING WHEN PUTTING (?) ON PIPE LINE

A SLIVER OF METAL GOT IN EYE WHILE TIGHTENING BOLTS ON THE SADDLE(CLAMPS) ON DREDGE WITH A AIR WRENCH.

WHILE ASSISTING WELDERS GLARE FROM ARCH BURNING EYES.

GRINDING METAL BELOW WORK PIECE A PIECE OF METAL BROKE LOOSE THROWING GRINDING ONTO HIS LEFT HAND CUTTING THUMB

CARELESSNESS

OPERATING BULLDOZER-MACH. WENT OVER STEEP EMBANKMENT-THROWING HIS BODY FORWARD & STRIKING HEAD AGAINST ROLL BAR.

EMPLOYEE WAS HELPING ANOTHER WHILE WELDING WELDER ACCIDENTLY STRUCKE ARC. CAUSING FLASH BURNS TO HIS EYES.

CUTTING A PIECE OF 2" X 12" WOOD AND THE SAW KICKED BACK INTO THUMB AND CUT TIP OF IT ALMOST OFF.DR REATTACHED WITH SUTURES.

EMPLOYEE WAS INSTALLING HYDRAULIC CYLINDER WHEN MACHINE BECAME OVER-BALANCED. CAUSING ARM TO STRIK SHOULDER.

EMPLOYEE WAS USING A GRINDER WHEN THE WIND BLEW A PIECE OF SLAG INTO RIGHT EYE.

MOVING STEEL BEAMS WITH OVER-HEAD CRANE. A STEEL BEAM TURNED OVER ON EMPLOYEES FOOT.

EMPLOYEE WAS GRINDING ON PIECE OF METAL- A SMALL PIECE FLEW INTO HIS EYE.

EMPL WAS WORKING CLOSE TO WELDERS & REFLECTION FROM ARC FLASHED BURNED EMPLS EYES.

EE WAS SAND BLASTING TWISTED NECK.

EMPLOYEE WAS WEARING SAFETY GLASSES & WAS GRINDING A WELD-A SMALL METAL FLAKE OR RUST PARTICAL HIT RIGHT EYE & REQUIRED REMOVAL BY DOCTOR.

HOT AFTERNOON END OF SHIFT.OLD USED CONVEYOR BEING CUT APART FOR JUNK YARD.IN A HURRY TO FINISH.

INHALED FUMES FROM GALVINIZED METAL

METAL FLEW FROM3FLYWHEEL AND INJURED FOREHEAD