Buscar en el registro

Employee was clearing off a screen that was overloaded with material, when a rock fell off and struck his right foot.

Employee lacerated his thigh with a power tool while cutting screen cloth. Injury required five stitches and medication for infection.

Employee was turning over the cutting edge of a 972G CAT loader. As he was loosening the right nut/bolt of the cutting edge the center bolt broke free causing the edge to drop suddenly to the ground on his right foot.

The affected miner had been welding on guards during his shift and had gone home at the end of his shift. Soon after arriving home, both of his eyes started to hurt and swell closed. He sought immediate medical attention and was diagnosed as having welding flash.

Employee was operating Komatsu PC 300 with a hydraulic hammer, a small stone came thru screen over windshield and shattered windshield, and piece of glass lodged in employee's index finger on his left hand.

EE WAS ASSISTING A WELDER. HE WAS TOLD NOT TO LOOK AT THE WELDING ROD, BUT DID SO ANYWAY. HE DID NOT HAVE WELDING GOGGLES ON. HE SUSTAINED MINOR FLASH BURN TO HIS EYE.

EE STATES THAT HE WAS GRINDING A PIECE OF STEEL WHEN THE GRINDER KICKED BACK HITTING HIS MIDDLE FINGER ON HIS LEFT HAND

EE WAS DIRECTING CRANE OPERATIONS WHEN A CABLE CAME LOOSE & BELL AGAINST HIS BACK CAUSING A CUT.

EE WAS WELDING CHIPING OF SLAGS OFF METAL WENT OVER TOP OF GLASSES CAUSING A SLAG TO GET INTO HIS EYE.

WHILE DRILLING, EE STATES THAT SOMETHING GOT IN HIS LEFT EYE. EE ATTEMPTED REMOVE OBJECT THROUGH EYEWASH. HIS EYE CONTINUED TO GET WORSE AND HE WENT TO SEEK MEDICAL TREATMENT.

EE WAS STANDING BACK OBSERVING THE LIFT WHEN THEWELDED LIFTING EYE BEING USED TO PULL A PIN FROMCRUSHER BROKE FREE & STRUCK HIM ON HIS SAFETY GLASSES CUTTING HIM ABOVE HIS EYE.

I NAME WAS WELDING ON SCREEN 4. HOT SLAG FROM THE WELDING ROD FELL ON TOP OF HIS LEFT BOOT TONGUE AND BURNED THRU THE TONGUE OR THE BOOT ONTO THE LEFT SIDE OF HIS FOOT.

EMPL CHANGING CUTTING EDGE ON LOADER.HELD THE BOLT TO PREVENT IT FROM TURNING WHILE TAKING THE NUT OFF WITH IMPACT WRENCH THE BOLT DROPPED ON HIS HAND AND TURNED WITH THE FORCE OF THE IMPACT W RENCH CUTTING HIS HAND.

HE WAS CLEANING WITH THE WATER HOSE AND HOLDING HOSE BETWEEN HIS LEGS. WHEN THE OTHER HOSE WAS TURNED OFF, PRESSURE BUILT UP ON HIS HOSE. THE PRESSURE ON HIS HOSE HIT HIM ON THE LEFT KNEE CAP KNOCKING IT OUT OF PLACE. NOTE- BOTH OF HIS KNEES HAVE BEEN INJURED BEFORE AT SCHOOL FROM WRESTLING.

I.NAME WAS WORKING WITH EMP 2 ON JOB SITE, AND WAS REMOVING LIFT CYLINDER; HE HAD 2 BOLTS IN CYLINDER. THE CYLINDER BLEW OUT, AND BUCKET STARTED TO FALL. I.NAME JUMPED OFF BACKHOE TO GET OUT O F THE WAY OF THE BUCKET AND CYLINDER WHEN BACKHOE RAN OVER HIS RIGHT FOOT.

EMPLOYEE WAS CHIPPING SLAG OFF OF A PIECE OF STEEL WITH CHIPPING HAMMER WHEN A SMALL PIECE OF THE HAMMER BROKE OFF AND INJECTED INTO THE EMPLOYEEHS LEFT HAND BETWEEN THUMB & INDEX FINGER.

EMPLOYEE WAS TRYING TO FREE STUCK FAN BY PULLING ON DRIVE BELT WHEN FAN BROKE LOOSE HE GOT HSI FINGER CAUGHT BETWEEN SHEIVE AND DRIVE BELT

INJURED WAS WELDING LIONER IN SURGE IN SHUTE -ROCK FELL DOWN FROM OVERHEAD AREA

EMPLOYEE WAS HO5DING LIGHT FOR ANOTHER EMPLOYEE WHO WAS OPERATING GRINDER WHEN HE WAS STRUCK IN THE EYE BY A GRINDING CHIP.

SHOVEL OPERATOR3WAS SWINGING LOAD ONTO TRUCK.WHEN HE RELEASED SWING LEVER,SHOVEL DID NOT STOP CAUSING BUCKET TO HIT BACK OF TRUCK.THREW TRUCK OPERATOR FORWARD IN CAB AND CAUSED WHIPLASH.

EMPLOYEE WAS WE5DING, CHIPPINGH OFF HOT SLAG, WHICH FELL INTO HIS BOOT AND BURNED LEFT EYE & ANKLE.

EMPLOYEE WAS WA5KING BY 4 1/4 CRUSHER,LOOKED UP AND ROCK FELL HITTING HIM IN THE CHIN AND MOUTH.

EMPLOYEE WAS US3NG CUTTING TORCH IN MUDDY AREAS SLIPPED & BURNED RT WRIST WITH ACETYLENE TORCH