Buscar en el registro

While using a side grinder employee was struck in the eye with a small piece of shrapnel. The extent of the injury was minimal.

EE WAS PREPARING A BOILER TUBE TO REPAIR A CRACK IN THE TUBE. AIR FROM THE PNEUMATIC GRINDER BLEW DUST UP UNDER HIS WELDING HOOD.

EMPLOYEES WERE CUTTING AND WELDING PATCHES ON SEWAGE TREATMENT PLANT.

DRILLING HOLE AT AN ANGLE WHEN DRILL LOCKED UP AND CAUGHT EE'S HAND BETWEEN STEEL.

TAKING CENTER POST FROM D COAL MILL & CENTER POST FELL FROM MILL LANDING ON UPPER CHEST

EE WAS REMOVING A HOIST FRICTION HE DID NOT WEAR GLOVES & WAS CUT RESULTING IN 6 STITCHES

EE WENT TO GET THE ATTENTION OF A CONTRACTOR. THE CONTRACTOR TURNED AROUND WHILE UNHOOKING A GAINT GUN AND EE WAS SPRAYED WITH PAINT.

EE WAS SUPERVISING WELDER ON AN OPERATION WHICH DID NOT HAVE THE APPROPRIATE ARAC SHIELD IN PLACE. DURING THE COURSE OF THE OPERATION EE RECEIVED MINOR WELDING BURNS TO THE EYES.

EMPLOYEE WAS GRINDING PIPE WHEN WHEEL CAUGHT THREDS & THREW HIS FINGER INTO GUARD.

ATTEMPTING TO REPAIR MACHINE HAND SLIPPED HIT FAN

RIGHT PINKIE FINGER WAS PINCHED BETWEEN SHEAVE AND CABLE GUIDE OF CRANE CABLE BLOCK.

WHILE INPECTING V BELTS HIS FINGERS BECAME PINCHED BETWEEN BELTS AND SHEAVE.

EMPLOYEE WAS OPERATING BURNER AND DID NOT HAVE EAR PLUGS IN AT ALL TIMES.

EMPLOYEE WAS DRILLING HOLE IN ROCK. LOOKED AWAY FROM DRILL BIT. A PIECE OF ROCK WENT INTO EYE.

CHANGING AIR HOSE ON CLYCLONES HOT MATERIAL DISCAHRGED FROM AROUND CLEAN OUT AIR LANCE.

MATERIAL SAMPLER PLUGGED UP. EMPLOYEE THOUGHT THE MOTOR WAS TRIPPED OUT BUT IT WAS NOT. HE STUCK HIS RIGHT HAND IN SCREW TO CHECK FOR MATERIAL. THE SCREW WAS STILL TURNING CAUSING THE TIP OF H ISRIGHT MIDDLE FINGER TO BE CUT OFF.

CLEANING LEDGE OFF WITH A BLOW PIPE DUST BLEW UP IN FACE

EMPLOYEE WAS OPERA TING A MOTOR CONTROL VALVE IN A MANUAL STATE LOCALLY MANUAL LEVER KICKED OUT & THE HAND WHEEL SPUN BACKWARDS THE HANDLE ON THE HAND WHEEL STRUCK HIS RT.WRIST BREAKING IT

EMPLOYEE WAS OPERATING A PNEUMATIC IMPACT WRENCH WITHOUT WEARING A FACE SHIELF ONLY SAFETY GLASSES METAL PARTICLES FINE WERE BEING BLOW AROUND AND FEW LODGED IN HIS LEFT EYE.

EMPLOYEE WAS OPERATING A PNEUMATIC IMPACT WRENCH WITH-OUT WEARING A FACE-SHIELD, ONLY SAFETY GLASES. METAL PARTICLES (FINE) WERE BEING BLOWN AROUND AND A FEW LODGED IN HIS RIGHT EYE.

EMPLOYEE WAS ATTEMPTING TO CHIP AWAY THE REMAING STUB OF A SLEDGE HAMMER HANDLE THAT WAS STELL AFFIXED INTO THE SLEDGE HEAD WITH A WELDING SLAG CHIPPING HAMMER THE HAND THAT WAS STABLIZING THE SLEDGE HEAD SLIPPED AS HE WAS COMMING ON DOWN STROKE WITH THE CHIPPING HAMMER THUS CONTACTING HIS LEFT WRIST PUNCTURING IT.

EMPLOYEE WAS USING A LARGE HIGH SPEED PEDESTAL GRINDER TO GRIND EDGE DOWN ON A 1INCH WASHER HIS HAND SLIPPED & HIS FINGER CAME IN CONTACT WITH GRINDING WHEEL CAUSING INJURY TO HIS RT.FINGER

BLOCK WAS BEING LIFTED FROM QUARRY WHEN LIFT DOG ON BLOCK PULLED LOOSE PROJECTING PIECE OF STONEBLOCK WAS BEING LIFT ED FROM QUARRY WHEN LIFT DOG ON BLOCK PULLED LOOSE PROJECTING PIECE OF ST ONE APPROX.1LB 30FT STRICKING EMPLOYEE ON HARD HEAD

EMP WAS WELDING3A PIECE OF SHEET METAL WHEN IT F ELL DOWN ONTO HIS SAFETY BOOT. THE METAL PENITRATED THE BOOT JUST BEHIND THE SAFETY TOE, AND LACERATED HIS TOE

EMPLOYEE WAS WE5DING ON THE DRAGLINE BUCKET AND HURT HIS BACK.

EMPLOYEE WAS WE5DING ON A BRACE AND A PIECE OF STEEL FEEL AND HIT HIMIN THE BACK OF THE HEAD.

DRIVING DOWN HA6L ROAD IN 651 CAT PAN WHEN VEHICLE HIT A PILE OF ROCK LEFT BY AN INDEPENDENT HAULER VEHICLE VEERED RT EMPLOYEE LURCHED FORWARD HITTING HEAD ON THE STEERING WHEEL

EMPLOYEE WAS WE5DING ON THE BARGE AND BURNT HIS EYES

OPERATOR DROVE 2OE TO THE EXCAVATION AND AS HEW WAS TURNING AROUND TO OPERATE THE BUCKET THE BACK HOE APPEARED TO JUMP OFF INTO THE HOLE AND PINNED I.NAME CAUSING HIS INJURY

EMPLOYEE WAS GR3NDING ON A PIPE LINE THAT IS UNDER CONSTRUCTION, EPOXY RESIN DUST FROM THE COATING ON THE PIPE LINE WAS LIBERATED INTO THE AMBIENT AIR CAUSING MINOR SECOND. MAJOR FIRST DEGREE BURNS TO THE T3SSUE SURROUNDING THE EYES.

OPERATOR GOT TO2 CLOSE TO THE EDGE OF A SLOPED AREA HE MANEUVERED THE EQUIPMENT SO IT WAS FACING UPHILL INSTEAD OF WAITING TO BE PULLED UP AND OUT BY A DOZER HE GAVE IT THROTTLE AND TURNED THE WHEEL THIS IS 5N ARTICULATED MACHINE THE MACHINE LURCHED AND ROLLED ONTO ITS SIDE THE OPERATOR JUMPED FREE AND CLEAR OF THE MACHINE

EMPLOYEE WAS CU7TING WITH A CUTTING TORCH AND BURNED HIS EYES

EMPLOYEE WAS CU7TING WITH A CUTTING TORCH AND BURNED HIS EYES

RMP WAS GRINDIN1 ON THE HAMMERS THE GRINDER SLIPPED AND CUT HIS KNEE

EMPLOYEE WAS CLEANING MATERIAL FROM AREA AROUND FLOP GATE. GATE STUCK & HE WAS USING A JACK HAMMER TO LOOSEN GATE. HAMMER SLIPPED & GATE KICKED BACK, PINNING HIS RIGHT HAND BETWEEN HAMMER & ED GE OF FRAME.

EMP WAS WELDING ON A BALL JOINT. HE LEANED AGAIONST IT, .AND THE RING FELL ON THE END OF THE FINGER AND CUT THE TIP OF IT OFF

EMP WAS OPERATING THE DOZER AND A PIECE OF ROCK FLEW OFF THE DRAGLINE AND HIT HIM

EMPLOYEE WAS STANDING ON THE CRANE, AND A ROCK FLEW OUT OF CRUSHED AND HIT HIM ON T HE ELBOW.

HAVING TROUBLE WITH COAL SYSTEM, WAS CHECKING OUT ROTARY VALVE, AND PUT RIGHT HAND IN VALVE WHILE IT WAS RUNNING, OPERATOR PULLED DISCONNECT SWITCH AFTER ACCIDENT.