Buscar en el registro

While operating the drill press in the wash maintenance shop to make a hole on plate, the drill bit got stuck and the base plate jerked and turned hitting the associates hand and cutting middle finger on left hand. The associate had to get sutures.

While unbolting two pipes and taking the last bolt out, one of the pipe flanges popped up striking the miner by the right eye.

Miner was crimping a hydraulic hose fitting. The metal plate shifted causing a metal sliver to become imbedded into his finger.

Cutting handrail with Porta band saw, took one hand off to catch handrail, saw came of handrail and struck his forearm resulting in stitches.

EE was cleaning the north cooler with a ompressed air tool. EE inserted the tool into a cooler tube and when the tube reached the bottom of insertion, the EE's finger got pinched between a 90 degree union and the seal block. The EE was not wearing gloves at the time of the incident. The injury to his right hand pointer finger required four stitches.

Shirt sleeve contacted grinding wheel & pulled arm into grinding wheel. Caused laceration on right forearm. Butterfly stitches used to close the wound.

While operator was running the dozer, the air conditioner vent came loose and fell down. The operator attempted to replace the vent cover without turning off the air conditioner and his hand hit the fan blade which is about five inches inside the unit.

Associates were welding pipe. A tension problem for pipe clamped into position. The associate got out of crane to assist the ground man. The associate was unbolting tension using his left hand which was near pinch point. At the same time other associate made adustment with hydraulic level to remove tension. The level spiked up then down pinching thumb between metals.

EE FINISHED REBUILDING THE H20 PUMP & WAS READY TO REMOUNT TO THE H20 TRUCK. USING A HYDRAULIC BOTTOM JACK TWO WORKERS STARTED TO JACK UP THE PUMP IN PLACE. DURING THE ALIGNMENT OF MOUNTING HOLES THE PUMP FELL OFF JACK HITTING EE'S MIDDLE FINGER OF RIGHT HAND AGAINST THE FLOOD. EE WENT TO DOCTOR ON MONDAY 7/12/04.

EE REPORTED SORENESS IN RIGHT ELBOW WHICH BEGAN ABOUT 9 A.M. & CONTINUED TO WORSEN THROUGHOUT THE DAY. EARLIER THAT MORNING HE WAS WORKING ON THE EAST OUTSIDE ELEVATOR TRYING TO TIGHTEN BELT & HAD PROBLEM TIGHTENING FROZEN TAKE UP SLIDES. HE HAD BEEN USING AN IMPACT WRENCH AND RATCHET. DOCTOR DIAGNOSED TENNIS ELBOW ON 12/31 & THOUGHT HIGH IMPACT WRENCH MAY HAVE CONTRIBUTED.

WHEN ADJUSTING A BAG GUIDE FENCE ON PALLETIZER, THE ADJUSTMENT BOLT WAS LOSSENED WITH RIGHT HANDHOLDING FENCE WITH LEFT HAND. FENCE SWUNG CAUSING A LACERATION TO LEFT INDEX FINGER Y

EE-THE PERSON WAS CUTTING 10" STEEL PIPE-AFTER PIPE WAS CUT HALF WAY THROUGH-HOOKED CHAIN TO PIPE TO ROLL PIPE OVER. PERSON WALKED OVER TO FINISH CUT AND SLIPPED ON PIPE AND TWISTED KNEE AND S TUMPED INTO ANOTHER PIPE CAUSING CNT IN SHIN-1STAID AT TIME OF ACCIDENT-NO MEDICAL ATTENTION NOTE ACCIDENT OCCURRED IN JULY BUT MAN RECEIVED RESTRICTED DUTY-11-11-98.

HOT PLATE SHIFTED AND HIT FINGER AGAINST PLASTIC PIPE WELDING MACHINE WHICH SMASHED FINGER, CHIPPED BONT AND LOST FINGERNAIL.

THE INJURED EE WAS STRETCH WRAPPING A PALLET OF CAT LETTER. A CORNER OF THE PALLET WAS HANGING OVER THE EDGE OF THE TURNTABLE. AS THE PALLET CORNER CAME AROUND, THE CORNER OF THE PALLET PASSED OVER EE'S FOOT & PINCHED HIS FOOT BETWEEN THE PALLET & THE FLOOR & PULLED THE EE ABOUT FIVE FEET BEFORE HIS FOOT WAS RELEASED FROM THE PALLET.

FINISHED TORCH CUTTING A PIECE OF 6" PIPE. STARTED TO GRIND OFF TO ATTACH A NEW FITTING. GRINDING WAS BEING DONE OVERHEAD FROM AN EXTENSION LADDER, APPROX 8' ABOVE THE GROUND. THE ASSOCIATE MOVED FOR A BETTER POSITION. HAND SLIPPED UP GRNDER AND CUT RIGHT INDEX FIGNER, REQUIRING STITCHES.

EMP WAS LIFTING AN ELECTRICAL ENCLOSURE WITH AN ELECTRIC HOIST. THE CHAIN HE WAS USING WAS BAD, IT HAD A BAD LINK. SOMEONE HAD DROPPED IT OFF FOR REPAIR BUT DID NOT RED TAG IT. EMP DID NOT NOT ICE BAD LINK,BROKE & DROPPED ENCLOSURE ON FOOT.

EE WAS GRINDING THE LIP OFF OF A BRAKE DRUM & GRINDING DUST GOT INTO HIS RT EYE ON 08-11-94 NO TE IRRITTATION WAS NOT REALIZED OR REPORTED UNTIL THE NEXT DAY 08-12-94 EE THEN WENT TO THE DOC FOR THE IRRITATION

CONTRACTOR WAS REMOVING A STEEL CYCLONE WITH A CUTTING TORCH. SPARKS FROM THE CUTTING TORCH STARTED A RUBBER LINNING BURNING. WHEN THE UPPER PIPE WAS REMOVED A WIND DRAFT FORCED FLAMES OUT THE LOTTON OF THE CYCLONE BURNING THE WORKERS LEFT HAND AND SOMEWHERE ON THE LEFT SIDE OF HIS FACE.

AS HE WAS GRINDING A PIECE OF METAL WITH A 4" GRINDER, THE GRINDER KICKED BACK AND CUT HIS LEFT INDEX FINGER. HE HAD TO HAVE 5 STITCHES.

EMPL WAS PRODING INSTRUCTION TO ANOTHER EMPL ON CRANE & BASKET LIFTING PROCEDURES. INJ THEN GOT INTO BASKET & DIRECTED OTHER EMPL TO LIFT & THEN MOVE B ASKET WITH HIMSELF IN IT. CHAIN UNHOOKED & BASKET & INJ FELL APPROX 10 TO 12' TO GROUND.

I.NAME GRINDING ON TRAILER FRAME.WAS WEARING RESPIRATOR WHICH LIFT HIS SAFETY GLASSES OFF HIS NOSE.SLIVER OF STEEL BECAME IMBEDDED IN LEFT EYE.NOT NOTICED IMMEDIATELY.EYE BECAME IRRITATED 4 HR S LATER.I.NAME WENT TO DR TO HAVE SLIVER REMOVED AND RETRW.

DRILLING HOLES 3N A CONTROL BOX IN A BENT POSITION EMPLOYEE INDICATED LATER THAT HE HAD A SORE BACK FROM LONG CAR RIDE TO ILLINOIS AND BACK

I.NAME OPERATING FRONT END LOADER,SPRAY OF WATER FROM MONITOR HIT STONES BY SLURRY BOX WHICH BOUNCED OFF INTO LOADER WINDSHIELD KNOCKING IT OUT.SUTURES.

I,NAME WAS HOLDING I-BEAMS IN PLACE FOR SPOT WELDING FOR ANOTHER WELDER DURING THE MORNING OF SU AUG. 20TH, 1984. I,NAME RECEIVED SOME WELDING FLASH DURING THIS PERIOD TO BOTH EYES.

#2 BUCKET ELEVATOR HAD BROKEN & FELL TO BOTTOM OF UNIT. THE ELEV. WAS LOCKED OUT. REPAIR CREW RA,WRAPPING ROPE AROUND HEAD PULLEY & WERE PULLING ON DRIVE BELTS TO LIFT UP BELTING TO HEAD PULLE Y. WHILE PULLING ON DRIVE BELTS-I.NAME\S LITTLE FINGER ON HIS LEFT HAND BECAME PINCHED BETWEEN THE BELT & SHEAVE OF THE MOTOR. THE FINGER WAS CUT REQUIRING 4 STITCHES.

EMPLOYEE WAS DRILLING INTO AN OVERHEAD I-BEAM WITH AN ELECTRICAL DRILL. A PIECE OF METAL SHAVING FLEW OUT OF THE DRILL INTO THE LEFT EYE. EMPLOYEE WAS WEARING SAFETY GLASSES WTSAFETY GLASSES W GLASSES WITH NO SIDE SHIELDS.

MIKE WAS MOVING AN UNLOADING HOSE ON A RAIL CAR.HE WAS ATTEMPTING TO CLIMB THE CAR METAL LADDER WHEN HE SLIPPED ON A STEP PART WAY UP THE CAR LADDER. AS HE FELL BACKWARD HE HIT HIS TAILBONE ON ANOTHER RAIL CAR BEHIND HIM. HE SAID HIS TAILBONE WAS EXTREMELY SORE FROM THE INCIDENT. HE WAS TAKEN TO THE CLINIC WHERE THE DO CTOR DISCOVERED A BROKEN TAIL BONE.

EMPLOYES WERE MOVING SLURRY BOX OUT OF SUMP HOLE WHEN THE 8" PLASTIC PIPE BECAME CAUGHT ON SLURRY PUMP. TIM ASTRACH THEN TRIED TO DISLODGE PIPE WHEN AIT BROKE STRIKING HIM IN THE CHEST AND KNO CKING HIM TO THE GROUND. THE SLURRY BOX WAS BEING MOVED WITH A RUBBER TIRED DOZER.