Buscar en el registro

Cleaning up a weld with a chipping hammer a piece of slag flew up under the helmet and caused irritation to the eye.

During Removal of X-bracing, bolts were removed and a weld failed that was holding a 10' piece of 6x6 angle. Angle came down and fractured employee's arm.

EE was observing the maintenance crew work, EE was standing 15' away with all P.P.E. on when a piece of metal the crew was chipping flew at EE striking EE in the tooth.

The incident occurred during the day time hours. Weather was clear. Did rain in the morning, but was done by the time of the incident.

Using an air gun to put a bolt in, employee was holding bolt in place and by accident hit the trigger on the air gun .... spinning the bolt and cutting finger

Excavator operator was working to close to the Highwall. The Dozer working on the bench above knocked a bolder free that fell on the cab of the excavator, injuring the operator.

Employee was drilling pre-existing holes on a hinge when the drill caught, spun around and hit the employee's finger

The employee was using a handheld grinder when he felt a pain in his back.

Employee was using a grinder while another employee was welding. He felt like something was in his eyes and he went to the hospital emergency room.

THERE WAS A LEAK IN THE ACETYLENE TORCH HOSE. EE DID NOT EXAMINE HOSE. (IGNITED ACETYLENE BURNED RIGHT FOREARM.)

2'6"x29' Steel Concrete form clamp system failed, allowing the form to seperate into 2 sections (2'6"x9' and 2'6"x21') as it was being lowered to the ground. 9' section broke away from main piece and dropped to the ground. 21' section remaining suspended by crane dropped to the ground impacting injured.

THE EE WAS HELPING THE WELDER AND EVEN THOUGH HE CLAIMED HE HAD A WELDING HELMET ON HE STILL RECEIVED FLASH BURNS TO HIS EYES.

EE WAS ATTEMPTING TO BREAK A DRILL STEEL USING A LARGE WRENCH WHILE HOLDING WRENCH AND OPERATING THE HYDRAULIC LEVER THE WRENCH SLIPPED CAUSING A BACK STRAIN TO THE EE.

EE'S HAND WAS PINCHED BY A HYDRAULIC ARM WHILE CHECKING FOR A LEAK.

EMP WAS WORKING TOO CLOSE TO ANOTHER EMP WHO WASWELDING. EMP RECEIVED A FLASH BURN AS WELL AS A PIECE OF METAL IN RIGHT EYE.

EMP GOT A FOREIGN OBJECT IN EYE WHILE OPERATING BROOM TRACTOR USED TO R REMOVE LOOSE WET MATERIAL FROM ENTRANCE TO PLANT. WIND WAS BLOWING AND ALIGHT RAIN WAS FALLING AT THE TIME OF THE ACCIDE NT.

EE WORKING AS A DRILLER'S ASSISTANT REPORTED STRAINING BACK WHILE REMOVING DRILL STEEL. THE STEEL MOVED AND EE GRABBED STEEL TO STOP IT. EE DID MENTION IT TO DRILLER OR STATED HE NEEDED TO GO TO DR WHEN REPORTING ACCIDENT.

THE CONTRACTOR'S CREW WAS CUTTING UP A METAL TANK. THIS MAN HAD CUT A PIECE OF THE TANK AND IT CAME DOWN ON HIS FOOT. EMPLOYEE WAS NOT WEARING STEEL TOE SHOES. EMPLOYEE HAS THREE BROKEN TOES A S A RESULT OF INJURY.

EE WAS USING A GRINDER TO GRIND THE NOSE BEARINGAREA OF A HAUL TRUCK. GRINDER SLIPPED OUT OF HAND CUTTING INDEX FINGER.

WELDING ON CHUTE UNDER #1 SCREEN.FLIPPED HIS WELDING HELMET UP AND SOME OF THE HOT SLAG POPPED OFF OF THE AREA HE WAS WELDING INTO HIS RIGHT EYE AND WOULD NOT COME OUT.

FELLOW EMPLOYEE WAS GRINDING BOLTS OFF OF CONVEYOR LACING WHEN A PIECE OF METAL DEBRIS HIT RIGHTEYE.

EMPLOYEE WAS OPERATING PORTABLE GRINDER ON CARRYALL PAN.WHEN CLIMBING OUT OF PAN HE LIFTED GRINDER BY HANDLE.HE ACCIDENTALLY HOT ON BUTTON,GRINDER WAS TOUCHING LEG,GRINDER ACTIVATED BRIEFLY,ST RIKING LEG.

WHILE GRINDING ON A DOZER, A PIECE OF STEEL WENT INTO RIGHT EYE.

WORKING ON SHAKER, PC OF IRON OR FELL ON THUMB

EMPLOYEE WAS CLEANING FINISH DEPARTMENT SCREENS WITH JACKHAMMER. HE RECEIVED A BLISTER ON RIGHT HAND WHICH BECAME INFECTED AND CAUSED BLOOD POISON. HE RECEIVED A TETANUS SHOT AND MEDICINE ON 9 -21-91.

EMPLOYEE WAS USING A GRINDER, WEARING GLASSES, A PIECE OF STEEL WENT INTO EYE.

GRINDING & WELDING PIECE OF METAL WHEN SMALL FRAGMENT FLEW IN EYE.

2 EES WERE PREP5RING TO INSTALL FLOOR DECK AT SCREENHOUSE BELT 18 AREA. THEY WERE REMOVING UPRIGHT & DIAGONAL BEAMS BY TORCHING BOLTS. WHILE REMOVING BOLTS DIAGONAL BEAM BROKE FREE OF UPRIGH T & FELL THRU F5OOR OPENING APPARENTLY HIT GORUND FLIPPED & STRUCK EE. EE WAS NOT DIRECTLY UNDER WORK AREA BUT WAS TO T HE SIDE.

EMPLOYEE WAS DI1GING ROCK OUT OF IMPACTOR A ROCK FLEW UP & HIT CHIN CAUSING LACERATION REQUIRFING SUTURES

EE WAS REPLACING METAL SKIRTING ON #2 RAW SILO FEEDOWEIGHT. AFTER REMOVING SKIRTING USING A CUTTING TORCH HE CUT OUT WORN METAL FOR REPLACING. WHILE CUTTING THE SKIRTING WHICH WAS POSITIONED ON T HE FEEDOWEIGHT FRAME THE PIECE OF SKIRTING FELL OFF THE FRAME FALLING APPROX 3\ HIT THE DEAD MAN CABLE SPRUNG UP & CAME DOWN END FIRST & STRUCK EES RIGHT FOOT BEHIND STEEL CAP ON SHOE.

EMPLOYEE WAS REPAIRING AND RESETTING VIBRATORY SCREEN. WHILE RESETTING THE VIBRATORY SCREEN, THE SCREEN BECAME CAUGHT ON SUPPORTING STRUCTURE, CAUSING A SLIGHT SWINGING MOTION, WHICH CAUSED EM PLOYEE TO BECOME CAUGHT BETWEEN THE SCREEN AND STRUCTURE. PINCHED AND BRUISED NERVES AND MUSCLES IN BOTH LEGS, MAINLY KNEES AND THIGHS.