Buscar en el registro

Employee was outside under feeder cutting bolt heads off. Employee stated wasn't feeling well and started coughing, stopped cutting and sat on tailgate of truck till started feeling better. Next day came in still coughing sent to ER.

Employee was welding in the box chute off #1 screen when a piece of hot slag fell on EE's pant leg and caught pants on fire causing a burn to lower leg.

Going to work on crusher went to use auto crane on F750 service truck when cable bird nested on cable wheel. Pulled all the cable out to rewind on wheel, as they were reeling cable in cable caught employee's glove and pulled it in between crane structure and cable wheel causing injury to fingers

Employee was operating a D8 dozer with cab, he was traveling around area that was being stripped of overburden. A rock being seen by employee was misjudged for its size (part of rock was covered with dirt)the track runs over rock when dozer came down it tossed employee forward hitting forehead causing a laceration that required stitches.

EMPLOYEE WAS USING A STEAM JENNY TO WASH LOADER OFF. WHILE USING THE HIGH PRESSURE WAND, EMPLOYEE WAS JERKED AND TWISTED CAUSING LOW BACK PAIN.

EMPLOYEE WAS WELDING & CUTTING ON GUARD AT PLANT. PIECE OF METAL SHAVINGS WENT UNDER SAFETY GLASSES INTO RIGHT EYE CAUSING IRRITATION. WENT TO DOCTOR WHERE METALLIC FOREIGN BODY WAS REMOVED.

EMPLOYEE WAS WORKING ON 988F LOADER. EMPLOYEE CRAWLED BETWEEN TIRE AND BODY OF MACHINE TO WELD ON HYDRAULIC TANK BRACKET, (IN AN AWKWARD POSITION), WHEN HE NOTICED HIS LEFT HAND GOING NUMB. MR I SHOWED THAT THE EMPLOYEE HAS HERNIATED DISC. (PLEASE SEE ATTACHED LETTER, GIVING MORE DETAIL.)

EE WAS CUTTING METAL OFF A HANDRAIL, THE BLAST OF METAL WENT UNDER HIS CUTTING GLASSES AND A PIECE OF METAL WENT INTO EYE.

EE WAS HELPING ON DRILL AND WAS STANDING NEAR THE NEXT HOLE TO BE DRILLED WHEN A PIECE OF DRILL STEEL FELL ON HIS RT FOOT ACROSS THE TOP ABOVE HARD TOE SECTION.

CHANGING CUTTING EDGE ON 966 E CAT LOADER. EMPLOYEE WAS HOLDING HAND UNDER PLOW BOLT IN ORDER TOGET IMPACT WRENCH ON NUT. WHEN WRENCH WAS ENGAGEBOLT HEAD WAS PUSHED OUT OF HOLE SPINING OLD WOR N BOLT IN PALM OF HAND. EMPLOYEE WAS WEARING GLOVES. CUT REQUIRED STITCHES.

WHILE UNLOADING CONVEYOR OFF LOWBOY THEY HOOKED CABLE FROM THE CRANE TO UNLOAD IT. AFTER TAKING THE HOOK OFF CO-WORKER WENT TO SWING CRANE. CABLE CAUGHT CONVEYOR & PULLED CONVEYOR UP. INJURED SLIPPED AND GRABBED CABLE, IT JERKED AND PULLEDSHOULDER AND ARM.

GOING DOWNGRADE AND DOOR SHUT ON MIDDLE FINGER, LEFT HAND.

EMPLOYEE FELL 42"-48" AND LANDED ON LEFT SIDE AND SHOULDER IN A PILE OF DUST. HE WAS ON A WORK PLATFORM. SPEED REDUCER END OF WASH SCREW BOLT IN GUARD POPPED OUT. EMPLOYEE FELT HE WAS ALRIGHT HOWEVER MUSCLES BEGAN TO TIGHTEN UP ON 4-19-91. DECIDED TO GO TO DOCTOR 4-23-91.

WHILE CUTTING BOLT IN CONVEYOR FRAME PIECE OF FRAME DROPPED APPROX. 4 TO 5 INCHES STRIKING LEFT FOOT BETWEEN SAFETY TOE AND ANKLE OF BOOT.

HE WAS AT THE SANDPLANT CUTTING METAL & A SPARK FLEW IN HIS EYE

EMPL OPERATING PUGMILL,INHALED DUST FROM CEMENT BEING ADDED TO MATERIAL.

INJURED WAS DRILLING AND A ROCK CHIP FLEW INTO HIS LEFT EYES.

EMPLOYEE WAS WELDING LIFTED WELDING SHIELD AND STARTED TO DESLAG PIECE OF SLAG HIT LOWER LEFT EYE.

WASHING WAND LEVER WAS ACCIDENTLY TURNED ON NOT SURE HOW TURNED ON WAND STRUCK EMPLOYEE ON LEFT CHEEK

I,NAME WAS CUTTING METAL WITHOUT CUTTING GOGGLES. THE SLAG BLEW BACK INTO HIS EYE CAUSING MINOR BURN AND IT SCRATCHED HIS EYE.

HE IS A DRILLER1 A RAG BLEW INTO THE ROTATION OF THE DRILL AND HE REACHED OUT TO GET IT AND IT PULLED HIS HAND TOWARD THE DRILL. IT BURST THE GLOVE THAT HE WAS WEARING. IT BRUISED HIS LEFT H AND. 3

BURNED RIGHT HA3D WITH TORCH.

OPERATOR WAS BR9AKING LARGE BOULDERS WITH A CRANE AND DROP BALL WHEN A SMALL PARTICKE OF ROCK CAME THROUGH THE PROTECTIVE SCREEN ON THE FRONT OF THE CAB STRIKING THE OPERTOR ABOVE THE RT EYE CUTTING AND BR6ISING THE EYEBROW AND EYELID

INJURED WAS ASSISTING THE WELDER AND RECEIVED FLASHBURNS TO HIS EYES