Buscar en el registro

Miner was repairing packing on a vacuum pump. Water sprayed in miner's eyes. Foreign object embedded (small bit of metal) in right eye either when water sprayed or when miner wiped his eyes to clear water. Miner received a prescription.

Drilling bolt out of Raymond Mill when drill hung & twisted left wrist counter clockwise causing a wrist strain.

A Mechanic received some 2nd degree burns from starting a Miller Sturdi-Saw. The Mechanic's body position caused him to contact the engine's exhaust on his left hand's palm, ring finger, and little finger.

EMPLOYEE WAS CLEARING OUT BAGGING MACHINE. EMPLOYEE WALKED OVER TO HEATER TO GET WARM. THE HEATER WAS BESIDE BAGGING MACHINE. DUST BLEW UP IN THE EMPLOYEE'S EYE'S. BAGGING MACHINE EMPLOYEE RUB BED EYES & THE EYE'S BECAME SCRATCHED. EMPLOYEE WAS TAKEN TO AN EYE DR WHERE PATCHES WERE PLACED OVER THE EYE'. HE MISSED 1 DAY'S WORK.

EE WAS CUTTING METAL WITH A GAS TORCH AND A PIECE OF HOT METAL FLEW INTO HIS EYE.

EE WAS INSPECTING TOP OF RAILCAR WHEN ANOTHER EE TURNED ON HI PRESSURE PUMP WHICH CAUSED HOSE TO WHIP AROUND AND SPRAY RT. EYE W/HI-PRESSURE WATER.

EE WAS ADJUSTING IDLE CONTROL ON WELDER ENGINE W/O PROPER GUARD IN PIKE IDLE SPRING PINCHED FINGER CAUSING EE TO JERK HAND, WHICH HIT ROTATING FAN BLADE, CUT RIGHT INDEX FINGER.

KICK BACK BRAKE ON THE CROWD OF NW SHOVEL WAS VIBRATING AND JUMPING CAUSING PAIN IN MIDDLE & LOWER BACK.

EE WAS USING CHIPPING HAMMER IN GENERAL AREA WHERE WELDING WAS GOING ON WAS NOT WEARING GOGGLES AND THE FLASH MUST HAVE BURNT HIS EYES.

EE WAS USING CHIPPING HAMMER IN GENERAL AREA WHERE WELDING WAS GOING ON WAS NOT WEARING GOGGLES AND THE FLASH MUST HAVE BURNT HIS EYES.

EMPLOYEE WAS RUNNING SCREEN TEST WHEN STEEL LID FROM SCREEN STACK DROPPED ONTO RIGHT HAND.

EMPLOYEE WAS BLOWING OFF EXOLON MACHINES AS PART OF HIS NORMAL DUTIES. FLEDSPAR WAS BLOWN INTO HIS LEFT EYE. SAFETY GLASSES WERE NOT BEING WORN AT THE TIME. EYEWASH AT THAT TIME AND CONTINU ED WORKING, INCLUDING THE NEXT DAY. INFLAMATION OF EYE HAD ONSET AFTER ACCIDENT DATE. OUT OF WORK 4-1-91 ONLY.

WHILE CHANGING DRILL BIT MAN WAS CENTERING BIT IN BIT BASKET AND DOWN PRESSURE FROM DRILL MASHING ENDS OF MIDDLEFINGER ON RIGHT HAND AND SMALL FINGER ON LEFT HAND.

CONTRACTOR WAS GUIDING A PUMP BOX INTO PLACE, WHEN THE CHAIN SECURING THE LOAD SLIPPED, DROPPEING BOX ONTO HIS HEAD AND BACK. THE LOAD WAS BEING MOVED USING A MONORAIL.

MOVING DROPBALL STARTED TO PULL UP BRAKE LEVER HIT L. ELBOW OVER BEARING HOUSING.

EMPL WAS PLACING MATERIAL TO BE WELDED FOR CONSTRUCTION OF STEPS ON THE OUTSIDE WHILE A SECOND MAN WELDED THE MATERIAL INTO PLACE RECEIVED WELDING BURNS TO BOTH EYES FROM TO LONG EXPOSURE TO G LARE FROM WELDING ARCS

HE SAID SOMETHING GOT INTO HIS EYE WHILE WORKING. HE WAS OPERATING A DROPBALL. SOMETHING HAD SCRATCHED SURFACE OF EYE.

INSTALLING RUBBER BOOT ON DISCARGE END OF TRUCK LOADING CONVEYOR FORM AND ELEVATED FORNT END LOADER BUCKDET LOADER MOVED AND E MP UNPED TO GROUND.

EMPLOYEE LOST FOOTING WHILE REPAIRING DIAPHRAGM PUMP, FELL TOWARD PUMP. THE MOVING ARM OF THE PUMP HIT EMPLOYEE IN RIBS ON RIGHT SIDE.

EMPLOYEE WAS CUTTING HOIST CABLE FROM DROPBALL TO REMOVE WEDGE USING A CUTTING TORCH SMALL PARTICLES FLEW BEHIND GLASSES INTO LEFT EYE CAUSING SMALL CUTS ON EYE HAD TO HAVE PRESCRIPTION ANTI BIOTIC DROPS & PAIN MEDICATION WORE EYE PATCH 24 HOURS

EMPLOYEE WAS OPERATIN G DROP BALL MACHINE AND OBJECT CAME THROUGH SCREEN AND CARRIED METAL INTO EYE

EMPLOYEE WAS WORKING NEAR FELDSPAR CONDITIONER(A TUB-LIKE CONRTAINER FOR CONDITIONING THE ORE IN AWASHING TYPE ACTION)WHEN SOME OF THE SLURRY SPLASHED IN HIS EYE.

EMPLOYEE REMOVE8 GUARD TO GREASE EXOLON MACHINE ROLLERS AND NOTICED GUIDE ROLLER WAS NOT TURNING REACHED IN TO TURN ROLLER AND IN SO DOING CAUGHT FINGERS IN BELT

EMPLOYEE WAS SA4ING BOLT INTO TWO PARTS THE SAW SLIPPED EMPLOYEE CUT HIS FINGER ON THE BOLT REQUIRING SUTURES

EMPLOYEE WAS WE5DING ON RODMILL DORR. A SMALL METALLIC FOREIGN BODY GOT IN EYE WHILE EMPLOYEE WAS WEARING WELDING HOOD.

IN AN ATTEMPT T2 UNCHOKE PIPE AT TAILINGS DIAPHRAM PUMP HE ALLEGEDLY WAS STRUCK BY T HE STROKING ARM OF THE PUMP

EMPLOYEE WAS DR3LLING A HOLE IN CONCRFETE FLOOR PRIOR TO INSTALLING A PIECE OF EQUIPMENT DRILL BECAME LODGVED IN CONCRFETE FLOOR CAUSING DRILL BIT TO LOCK THE WHOLE DRILL THEN BEGAN TO ROTATE RESULTING IN IM1ACT TO BACK OF LEG-RIGHT LEG CALF-3IN BELOW KNEE-WITH DEEP BRUISES

EMP WAS CHIPPIN1 A PIECE OF ANGLE IRON WITH THE CHIPPING HAMMER AND APPARENTLY PIECES OF METAL GOT IN HIS EYE, IRRITATION OF LEFT EYE

EMPLOYEE WAS TR2ING TO START PONY ENGIN ON D6 DOZER AND IN SO DOING THE PULLEY ON THE PONY ENGIN KICKED BACK AND CAUGHT HIS FINGERS IN V-BELT DRIVE.

EMPLOYEE WAS TRYING VACUUM UP DUST WITH DUST HOSE WHILE STANDING ON FORKLIFT FORKS. MACHINE SWITCH WAS OFF, BUT WAS NOT LOCKED OUTON BAG LOADER MACHINE. HURT LEFT HAND AND FOREARM.

EMPLOYEE WAS WELDING A PIECE OF METAL AND AFTER THE METAL COOLED OFF A PIECE OF SLAG POPPED OFF AND WENT IN HIS LEFT EYE IRRITATION OF LEFT EYE

SEAT ON DROPBALL CAME LOOSE CAUSING EMPLOYEE TO FALL TO FLOOR OF MACHINE, HURTING LOWER BACK.

EMPLOYEE WAS GOING TO CUT WATER VALVE OFF. ROCK FLEW FROM CRUSHER AND HIT RIGHT EYE.

EMPLOYEE WAS USING DRILL WHEN DRILL BIT BECAME LODGED CAUSING DRILL TO KICK BACK HITTING EMPLOYEE OVER AND IN LEFT EYE

EMPLOYEE WAS CHECKING THE OPERATION OF THE SPAR RAKE PUMP WHEN IT WAS TURNED ON MISTAKENLY FOR THE SPAR RAKE. THE UNGUARDED BELT DRIVE CAUGHT THE FINGERS OF HIS RIGHT HAND. TAG & LOCK OUTS WERE NOT USED BY EMPLOYEE.

DRILL TRACK GOT IN WASHOUT DRILL WAS TURNING OVER EMPLOYEE JUMPED CLEAR OF DRILL AND HIT SOME ROCK