Buscar en el registro

Employee was outside under feeder cutting bolt heads off. Employee stated wasn't feeling well and started coughing, stopped cutting and sat on tailgate of truck till started feeling better. Next day came in still coughing sent to ER.

Going to work on crusher went to use auto crane on F750 service truck when cable bird nested on cable wheel. Pulled all the cable out to rewind on wheel, as they were reeling cable in cable caught employee's glove and pulled it in between crane structure and cable wheel causing injury to fingers

Employee was operating a D8 dozer with cab, he was traveling around area that was being stripped of overburden. A rock being seen by employee was misjudged for its size (part of rock was covered with dirt)the track runs over rock when dozer came down it tossed employee forward hitting forehead causing a laceration that required stitches.

EMPLOYEE WAS WELDING & CUTTING ON GUARD AT PLANT. PIECE OF METAL SHAVINGS WENT UNDER SAFETY GLASSES INTO RIGHT EYE CAUSING IRRITATION. WENT TO DOCTOR WHERE METALLIC FOREIGN BODY WAS REMOVED.

EMPLOYEE WAS WORKING ON 988F LOADER. EMPLOYEE CRAWLED BETWEEN TIRE AND BODY OF MACHINE TO WELD ON HYDRAULIC TANK BRACKET, (IN AN AWKWARD POSITION), WHEN HE NOTICED HIS LEFT HAND GOING NUMB. MR I SHOWED THAT THE EMPLOYEE HAS HERNIATED DISC. (PLEASE SEE ATTACHED LETTER, GIVING MORE DETAIL.)

EE WAS CUTTING METAL OFF A HANDRAIL, THE BLAST OF METAL WENT UNDER HIS CUTTING GLASSES AND A PIECE OF METAL WENT INTO EYE.

EE WAS HELPING ON DRILL AND WAS STANDING NEAR THE NEXT HOLE TO BE DRILLED WHEN A PIECE OF DRILL STEEL FELL ON HIS RT FOOT ACROSS THE TOP ABOVE HARD TOE SECTION.

WHILE UNLOADING CONVEYOR OFF LOWBOY THEY HOOKED CABLE FROM THE CRANE TO UNLOAD IT. AFTER TAKING THE HOOK OFF CO-WORKER WENT TO SWING CRANE. CABLE CAUGHT CONVEYOR & PULLED CONVEYOR UP. INJURED SLIPPED AND GRABBED CABLE, IT JERKED AND PULLEDSHOULDER AND ARM.

GOING DOWNGRADE AND DOOR SHUT ON MIDDLE FINGER, LEFT HAND.

MORTAR SAND BELT TRIPPED OFF LINE. RESET ENGAGED & BELT WAS RESTARTED. BELT STOPPED AGAIN. FUSE DISCONNECT WAS OPENED & FUSES WERE REMOVED. WHILE REINSTALLING NEW FUSES, ELECTRICAL ARC OCCURRE D CAUSING FLASH OVER BURNING RIGHT HAND. LIGHTINHIT LINE DURING THIS CHANGE-OVER RUNNIGN IN ON EQUIPMENT.

WAS USING A CUTTING TORCH TO CUT BOLTS HEADS OFF FLASHING WHEN FIRE CAME OFF HOT METAL AND WENT INTO BOOT AND BURNT LEFT FOOT.

AIR LINE BLEW OFF DRILL HEAD & HIT EMPLOYEE IN THE MOUTH & CHAIN. CAUSED A JAGGED CUT FROM ONE END OF THE MOUTH TO THE OTHER END ON THE INSIDE DO MOUTH. ALSO A PUNCTURE FROM INSIDE TO THE OUTS IDE ON CHIN BELOW LIP. KNOCKED FRONT TEETH LOOSE & BENT PARTIAL PLATE.

EMPLOYEE PUSHED TRAVEL LEVER AND KNUCKLED THE CRANE. WHEN HE REACHED FOR LEVER TO MOVE THE CRANE, THE LEVER SLIPPED OUT ON ITS OWN AND JAMMED MIDDLE FINGER ON LEFT HAND AND BRUISED FINGER.

EMPLOYEE FELL 42"-48" AND LANDED ON LEFT SIDE AND SHOULDER IN A PILE OF DUST. HE WAS ON A WORK PLATFORM. SPEED REDUCER END OF WASH SCREW BOLT IN GUARD POPPED OUT. EMPLOYEE FELT HE WAS ALRIGHT HOWEVER MUSCLES BEGAN TO TIGHTEN UP ON 4-19-91. DECIDED TO GO TO DOCTOR 4-23-91.

CLUTCH DRAGGED ON REHAUL BRAKE FOOT CAUGHT & CLUTCH PUSHED FOOT TOO FAR BACK BRUISED FOOT

WHILE CUTTING BOLT IN CONVEYOR FRAME PIECE OF FRAME DROPPED APPROX. 4 TO 5 INCHES STRIKING LEFT FOOT BETWEEN SAFETY TOE AND ANKLE OF BOOT.

HE WAS AT THE SANDPLANT CUTTING METAL & A SPARK FLEW IN HIS EYE

EMPL OPERATING PUGMILL,INHALED DUST FROM CEMENT BEING ADDED TO MATERIAL.

INJURED WAS DRILLING AND A ROCK CHIP FLEW INTO HIS LEFT EYES.

EMPLOYEE WAS WELDING LIFTED WELDING SHIELD AND STARTED TO DESLAG PIECE OF SLAG HIT LOWER LEFT EYE.

I,NAME WAS CUTTING METAL WITHOUT CUTTING GOGGLES. THE SLAG BLEW BACK INTO HIS EYE CAUSING MINOR BURN AND IT SCRATCHED HIS EYE.

HE IS A DRILLER1 A RAG BLEW INTO THE ROTATION OF THE DRILL AND HE REACHED OUT TO GET IT AND IT PULLED HIS HAND TOWARD THE DRILL. IT BURST THE GLOVE THAT HE WAS WEARING. IT BRUISED HIS LEFT H AND. 3

BURNED RIGHT HA3D WITH TORCH.