Buscar en el registro

Ee was using a flubber (air lance) to loosen compacted material in a cement silo. While lifting on the flubber he felt a pain in his shoulder. This accident was reported on 9/4. It was not until Friday, 9/18 that the employee requested to be seen by a doctor. Report filed on 9/24, three working days later.

Employee was cutting bolts from a liner with an oxyacetylene torch when his pant leg caught fire. He sustained second degree burns to his shin in an area approximately 2 by 5 inches. He was wearing polyester coveralls which contributed to the severity of the burn.

Employee was manually cycling tipping gate when cam drive pinched his finger against the actuating arm. He had removed guarding and had not stopped cam drive motor. He worked on tipping gates while gates were in operation.

Ee was cleaning build up from the inside of a distribution manafold on the slurry line spray nozzle. She used compressed air to blow out the line and the plugged line blew material back into her face and into both eyes. This required medical care to remove the alkali material.

Employee was injecting compressed air into a discharge pipe beneath the drop out box when hot dust "spashed" into the opening around the gauntlet on his heat reflective gloves. This resulted in a second degree burn on his right hand. He was placed on light duty, to keep hand clean and dry.

Employee backed a D10 dozer over the berm on Bench 8 and fell to Bench 9, 35 feet below. He suffered minor lacerations on his face and a strained shoulder. He was placed on light duty.

Miner was cleaning out blower hose when sand flew under his safety glasses and into his left eye.

Employee was cutting with a torch and hot slag popped into his eye around loosely fitted welding goggles.

Ee was using hand grinder cutting thin plate metal. strip of cut metal flipped off the edge of the grinder and cut his hand. Sutures required.

Ee operating a dozer inside the Clinker Shed. He was leaning on the right arm rest when he was jostled. His right arm slipped off the rest and banged against the metal plate under the arm rest resulting in a contusion. The Ee coming off swing shift, not required to return to work until following Wednesday, no light duty, Rx for pain and swelling.

WHILE EMPLOYEE WAS CUTTING A NUT OFF A BOLT SOME HOT SLAG POPPED AND LANDED IN HIS LEFT EAR.

WHILE EE WAS LAYING ON HIS BACK, CUTTING A WATER PIPE A PIECE OF HOT METAL SLAG FELL INTO HIS RIGHT EAR.

WHILE WALKING BETWEEN JAW CRUSHER AND JCI SCREEN A ROCK FELL AND HIT EE ON HIS LEFT SIDE OF HEAD.

WHILE CUTTING METAL IN TUNNEL, A PIECE OF HOT SLAG FELL INTO RIGHT EAR.

EE WAS GRINDING BURRS OUT OF HOLES WITH GRINDING WHEEL. SOME FRAGMENTS FLEW & HIT EE IN RIGHT EYE.

EE TWISTED KNEE WHILE SAND BLASTING. WHILE BLASTING ON UNEVEN SURFACE HE STEPPED ON A ROCK AND TURNED HIS KNEE.

WHILE EE WAS PUSHING MATERIAL AT SURBE PILE MUD FLEW UP OFF OF TRACK HITTING HIM IN THE EYE.

EE MIXES CEMENT WITH KEROSINE IN DEVICE CALLED A WAGNER. A CYLINDER OF MIXTURE IS PLACED INTO A CLAMP MOUNTED ON THE WALL.

EE WAS EXPOSED TO WET CLINKER (CEMENT DUST) WHILE WORKING A JACK HAMMER. DEVELOPED A RASH. FIRST SEEN BY PHYSICIAN 3-28-00

WHILE USING CUTTING TORCH RUST FLEW IN EE'S RIGHT EYE

ROCK ON SCREEN FELL OFF AND SMASHED FINGER.

CRANE LIFTING CHAIN, 1 OF 3, DISCONNECTED CAUSING GENERATOR TO BECOME UNBALANCED AND WHEN HITTING GROUND, ROLLED ON TOP OF EE.

HOT SLAG SPLASHED ONTO EE AS HE WAS SCARFING METAL. THE HOT SLAG BURNED THROUGH HIS PANT LEG AND ENTERED HIS OPEN TOP BOOT.

EE WAS CUTTING A LINER OUT OF THE MILL. A LINER PLATE BROKE LOOSE AND STRUCK HIM ON THE THUMB. EE 'S FIRST KNOWLEDGE OF THE INJURY WAS 2-19-98.

EE WAS CUTTING STEEL WHILE BENDING OVER. A PIECE OF HOT SLAG METAL ENTERED HIS EAR BURNING THE TYMPANIC MEMBRANE. THE CO'S FIRST KNOWLEDGE OF THE INJURY WAS 2-19-98.

EMPLOYEE WAS OBSERVING A ROCK BREAKER BUST BOULDERS IN THE LIMESTONE CRUSHER HOPPER. A SMALL ROCK SHEARED OFF THE BOULDER AND STRUCK EMPLOYEE IN THE MOUTH. LACERATIONS TO HIS UPPER AND LOWER L IPS.

EE STEAM CLEANED FRONT END LOADER. FELT SORE NEXT DAY. SEEKED MEDICAL CARE FOUR DAYS LATER. FIRST DAY MISSED 12/26/96.

THE OPERATOR WAS DOZING A ROAD ACROSS THE 2ND BENCH WHEN THE ROAD BENEATH HIM GAVE WAY.THE REAR OF THE MACHINE SLID DOWN AND WAS AT A VERY STEEP ANGLE.THE MACHINE SAT STATIONARY FOR ABOUT 10-1 5 SECONDS AND THEN ROLLED ONCE AND LANDED ON ITSTRACKS ON THE PIT FLOOR.THE OPERATOR WALKED OUT.

EE WAS ASSISTING IN REMOVING ROCK FROM 41/2" TO CRUSHER THAT HAD PLUGGER UP WHEN ROCK ROLLED OFF STRIKING TOP OF RIGHT FOOT.

BURNING RIPPER TEETH FROM D-10-N DOZER. HOT METAL SLAG WENT INTO INNER EAR.

HAUL TRUCK WAS BEING LOADED BY DRAGLINE. DRAGLINE BUCKET HIT TAILGATE OF TRUCK CAUSING A WHIPLASH ACTION.

EE REPORTED TWO DAYS LATER 5-12-96 THAT HE WAS SORE AT THE END OF HIS SHIFT FRIDAY 5-10-96. EE UNSURE OF EXACT CAUSE. STATES THAT THE ROLLERS ON THE 1 PACKING MACHINE ARE NOT WORKING MAKES SEA T ROLL HARD.

EE WAS USING A TORCH, THE EE CUT THE SUPPORT FOR THE GATE. THE GATE FELL CAUSING THE EE TO FALL BACKWARD.

EMPLOYEE WAS DRAINING AIR RECEIVER ON BRAKING SYSTEM FOR 9 TON TRACKMOBILE. BLAST OF AIR BLEW LOOSE MATERIAL FROM BACK OF 9 TON TRACKMOBILE INTO HIS RIGHT EYE. MATERIAL BECAME LODGED IN EYE.

EE WAS HOOKING UP HOISTING DEVICE TO BARREL OF GRINDING BALLS. THE EE PLACE HIS HAND IN A PINCH POINT. THE LOAD WAS LIFTED & THE EE'S FINGER WASLACERATED.

EMPLOYEE WAS PUSHING A SMALL PIECE OF WOOD THROUGH BLADE. A PIECE KICKED BACK AND STRUCK HIS RIGHT FINGER AND THUMB, PUSHING BACK AND TEARING THE FINGER NAIL AND FLESH ON TIP OF RING FINGER.

TOO MUCH STRAIN ON BACK FROM TURNING IN SEAT TO BACK UP. TOO MANY HOURS ON DOZER.

EMPLOYEE WAS ARC WELDING. HE LIFTED HIS HOOD TO CHECK HIS WORK AND A PIECE OF WELD SCALE POPPED INTO HIS RIGHT EYE. DR. FOUND NO FOREIGN OBJECTS IN RIGHT EYE. EVIDENCE OF SCRATCHED CORNEA. PRE CAUTIONARY MEDICATION PRESCRIBED (ANTIBIOTICS).

WHILE PERFORMING NORMAL DUTIES. SACK WAS FULL OF SAND. IT CAME OFF SACKER AND FELL ON LEG, CAUSING HIM TO FALL OFF OF THE CHAIR.

ON 04-14-95 EMPLOYEE WAS CONSTRUCTING A METAL PLATFORM WORKING IN HIGH WIND AREA HOT SPARKS FROM CUTTING TORCH BLEW UP PANT LEG &INTO BOOT WOUND BECAME INFECTED REPORTED 04-27-95

LEANED AGAINST THE AIR CYCLINDER VALVE WHEN THE THUMB GOT SMASHED AGAINST THE VALVE AND BACK STOP ON THE CUT OFF SAW (SHOP AREA).

EE WAS LINING CHUTE ABOVE CURSHER #2. WHEN DIRECTING STEEL CHUTE LINER INTO POSITION, THE CABLE HOOK ON THE CRANE HUNG UP ON A CROSS MEMBER. EE PULLED ON THE CABLE TO RELIEVE IT. THE PLATE SLI PPED HITTING HIS LEFT SHIN.

EE TURNED ON THE GRINDER USING THE PROPER HAND POSITION. WHEN THE GRINDER WAS ENERGIZED, THE TORQUE SPUN THE GRINDER ENOUGH FOR THE THE DISC (7") TO CUT HIS LEFT ARM.

EE WAS REPAIRING A CONVEYOR BELT SPLICE. HE USED HIS LEFT HAND TO SUPPORT THE BOLT HEAD SIDE OF THE FLEXCO FASTNER. HE WAS TIGHTENING THE NUT WITH AN ELECTRIC IMPACT WRENCH WHEN BOLT HEAD SPUN LACERATING THE PALM OF HIS LEFT HAND.

EMPLOYEE WAS INSTALLING "BLUE RAM" PLASTIC REFRACTORY IN THE DROP OUT BOX ON THE KILN. HE WAS USING A PNEUMATIC RAMMING TOOL, INTERMITTENTLY OVER AN 8 HOUR SHIFT. HANDS FELT NUMB FOLLOWING THE SHIFT. TREATING PHYSICIAN APPLYED SPLINT AND EMPLOYEE WAS PLACED ON MODIFIED WORK.

EE IS NOT SURE WHEN OR HOW DURING HIS SHIFT, HE GOT A METAL PARTICLE IN HIS RIGHT EYE. EE HAD BEEN USING BOTH A HAND HELD GRINDER AND AN IMPACT WRENCH DURING THE SHIFT.

EE WAS OPERATING A MOTOR GRADER. WHEN HE TURNED TO LOOK BEHIND HIM HE FELT A TWINGE IN HIS LOWER BACK. EE WAS UNDER CURRENT CARE FOR A NON WORK RELATED INJURY TREATMENT FOR PREVIOUS 6 WEEKS.

EMPLOYEE WAS GATHERING SAMPLES OF DUSTY MATERIAL, DUST FROM THE PUMP BLEW INTO HER FACE, GETTING DUST IN HER EYES. SHE WAS WEARING SAFETY GLASSES.

INJURED WAS WORKING WITH DOLLAR REMOVING THE DOOR FROM THE FIRST COMPARTMENT OF THE #1 FINISH MILL. A NUT FROM THE DOOR BECAME CAUGHT IN THE SOCKET ON THE IMPACT WRENCH. SILVA HAD SCREWED TH E NUT ONTO A STUD AND WAS PULLING ON THE SOCKET.THE DOOR FELL PINCHING HIS FINGER BETWEEN THE NUT AND THE CROSS BAR.

EMPLOYEE WAS LOOSING THE BOLTS HOLDING THE TEETH ON THE SCRAPER. EMPLOYEE WAS WORKING FROM BELOW AND AIR FROM THEIMPACT GUN CAUSED MATERIAL TO BLOW INTO THE AIR AND A FOREIGN OBJECT ENTERED T HE EMPLOYEE RIGHT EYE.