Buscar en el registro

An employee using an ironworker sustained a finger injury. Taken to ER for treatment. Has been taken off work.

A mobile jib crane was being used to lift a piece of grating. When the grating did not move the crane was readjusted while still attached and under pressure. The grating cross bar failed and caused the chain assembly and crane arm to strike the EE in the face. EE was treated by MD and taken off work.

EE was welding a plate from the underside of a bucket and when he began to pry the plate off, it broke free, hit the ground and flipped onto the ee's R foot. He was evaluated and given restrictions to return to work. He returned to full duty on 12-31-15.

Mechanic installed a distribution hose on portable steam cleaner. When he started the steam cleaner hose came off, noise, caused mechanic to jump back twisting knee. Employee was evaluated and provided restrictions the department accommodated as normal work duties. 11/5/15 determined duties performed are not part of normal job duties and thus to be counted as Restricted Duty Days.

EE alleges back pain from leaning forward in an awkward position to weld. On 9/19 it was made known that he alleged a missed shift on 9/15 as related to his work injury. He was not disabled off of work by a health care provider. EE had self-treated with a chiropractor and on 9/24 the workers comp carrier determined to accept chiropractic tx with his comp claim.

Employee alleges right eye pain. No specific event stated; employee reports he'd been welding & grinding at work frequently. He was evaluated by a MD and a foreign object was removed. He was given Rx eye drops and narcotic pain medication. He missed his 8/15 shift due to taking pain medications. He was scheduled off 8/16-17 & returned to work full duty on 8/18.

Employee was backing a dozer up and reported that he hit a chunk of rock, causing him to be jostled in the dozer and experience back pain. He was evaluated by a physician and taken off of work.

Arc Flash from welding operation.

The employee was using a grinder to perform work when the grinder "jumped" and caught his left index finger, pulling it between the guard and cutoff wheel. He was evaluated by a physician and four sutures were used to close the wound. He was released back to work with restrictions to keep the wound clean and dry.

Employee was cutting a burn ring when a piece of hot slag entered into his boot, causing small burns to his left foot. Employee treated with his personal doctor on 9/26. He was taken off of work and missed his scheduled shifts on 9/25-9/27. Employer was made aware on 9/30 that the missed time was related to his to his reported 9/5 work injury.

While using an air chipper to chip rust off of a beam, employee felt a foreign object enter his left eye. He was evaluated by a physician. The foreign object was removed using a cotton swab and the employee was given a prescription for antibiotic eye drops.

On 1/23/13 a chunk of material rolled off of a mining face and made contact with the shovel, causing the shovel operator to be jostled. He was evaluated by a physician on 1/23 and released back to full duty work. On 10/10/13 he was prescribed physical therapy. He completed a "series" on 10/21/13.

While using a pneumatic grinder with wire wheel, the grinder kicked back and struck the employee in the right knee, causing a laceration. The employee was evaluated by a physician on 12/7. Dermabond medical glue was used as an alternative to sutures to assist with wound closure. The employee was released back to work full duty for his next scheduled shift on 12/10/12.

On 9-7-12, the employee felt a pop in his left shoulder while lifting an impact wrench (8 lbs) to his co-worker. He was evaluated by a Physician, given an immobilizing sling and returned to work with restrictions.

Welding/Arc Flash.

EE experienced pain in his lower back while working inside the line 7 feed chute. He was evaluated on 2-17-12 and taken off of work. He missed one scheduled shift. This may potentially be related to a previous incident in January 2012.

Using a grinder to remove pipe & hangers & supports on a lube oil skid. Cut thumb while switching hands on the grinder.

Employee recieved a facial puncture wound (metal) in her right cheek while partner was using a bolt driver. She was evaluated by a Physician and the wound required sutures.

Employee was tightening down bearing caps with an air impact, dirt blew up from the table he was working on and got into his eye. He was evaluated by an Opthalmologist, the FB was removed and he was given prescription eye medications.

After Employee was welding, he complained of pain to his eye. He was evaluated by a physician and eye medication was prescribed.

Burned hand with plasma cutter. Burn later became infected, resulting in loss time.

PMCI employee & a Mill person were standing inside a fan housing, pushing up on the fan to rotate the fan. The fan started to move & injured's head got between the fan and the side of the housing. The other 2 people immediately stopped the fan rotation and pushed down freeing his head. His ear was cut and required stitches.

Employee was welding on a corner bit for a grader blade. The edge was on the work bench standing up. The edge blade began to fall and employee tried to catch it jamming his finger against the edge. He suffered a fracture of the finger.

Employee was working at Unit 2 Kiln cooler dump point. While they were observing pellets in the cooler from the area of the access doors, a blast of hot dust and steam from inside the cooler knocked open the steel doors and pushed the employee backwards. The hot dust contacted him causing first and second degree burns to his head and neck area resulting in loss time.

Employee was attempting to inflate a tire on an electric cart. When he turned the air on, he was hit on the lip by the unconnected end of the inflation device. He received sutures to his lip.

Employee was cutting directly overhead when a piece of slag landed on his glove. While brushing the slag off his glove he inadvertently swung the torch across his right leg, resulting in a burn to his leg. He was evaluated by a physician and taken off of work for 2 days: 2/28/06 and 3/1/06.

While guiding a steel pipe using an overhead crane, the pipe shifted and employee's hand got pinched between the pipe and the steel rack on the truck bed. He received 4 stitches in his left hand.

Employee was grinding metal and felt something in his eye. He went to the Doctor three days later and had a small piece of metal or dirt removed.

EE WAS USING A CUT OFF WHEEL ON A AIR GRINDER TOCUT OFF THE RAILING ON A PIECE OF EQUIPMENT. THEWHEEL ON THE GRINDER BLEW APART STRIKING HIM ON THE LEFT SIDE OF NECK RESULTING IN A LACERATION.

EE AND HIS PARTNER WERE WORKING ON UNIT 4 ROOF MONITORS. THEY HAD TO REMOVE SOME SHEETING TO GET AT THE LOUVERS. WHEN USING AN IMPACT TO REMOVE THE SHEETING SCREWS, ALL THE BOTTOM SCREWS WERE OUT AND WHEN HE STARTED TO REMOVE THE CENTER SCREWS THE SHEETING BROKE OFF STRIKING EMPLOYEE'S LEGS RESULTING IN A CONTUSION TO HIS RIGHT LEG.

INJURED WAS USING A SAW TO CUT A HEAVY OIL LINE.THE OIL SPRAYED HIM ON THE FACE & EYES. HE THOUGHT THE LINE WAS DEPRESSURIZED.

INJURED WAS USING A BLOW PIPE TO UNPLUG A DERRICK SCREEN WHEN THE PIPE STRUCK HIM ON THE MOUTH. HE REQUIRED DENTAL WORK.

WHILE WELDING REFRACTORY CLIPS ON THE SOUTH PREHEAT HE WAS STRUCK ON THE HARD HAT WITH A REFRACTORY CHUNK.

INJURED WAS PRYING TO FREE THE TABLE BUSHING FROM THE DRILLS BIT AND REAPYR. HE SCPTLE ASSEMBLY ON THE DECK. THE ASSEMBLY TIPPED OVER STRIKING HIS LEFT THUMB THAT WAS POSITION ON THE CABS DO OR WAY.

INJURED WAS CUTTING A PIECE OF ANGLE IRON OR A BAND SPIN WHEN IT FLIPPED UP A CAUGHT HIS FINGER BETWEEN THE GUARD AND THE IDLE. THIS CAWED LACERATION THAT REQUIRE STITCHES.

INJURED WAS LIFTING A BALL COOKER OFF OF A CONVEYER WITH A CRANE. HE WAS PUSHING AND PULLING TO MANIPULATE AND POSITION THE COOKER WHEN HE WRENCHED HIS NECK. PHYSICAL THERAPY PRESCRIBED.

INJURED WAS USING AN AIR PIPE TO CLEAN A RAILROAD SWITCH. THE PRESSURE CAUSED HIM TO LOOSE HIS BALANCE AND FALL. THIS RESULTED IN A BACK INJURY.

WHILE WELDING ON A DUST COLLECTION PIPE, HE STRUCK HIS HEAD ON THE DUST COLLECTION BOX CAUSING NECK STRAIN.

EMPLOYEE WAS WELDING INA KNEELING POSITION. WHENHE ATTEMPTED TO STAND UP, HE FELT A PAIN IN HIS LOWER BACK.

INJURED WAS BENDING OVER CLEANING A CRUSHER MANTLE WITH A WIRE BRUSH GRINDER WHEN HE FELT A PAIN IN HIS BACK.

CABLE SKIDDER WAS GETTING READY TO PULL OUT MEIRED DOWN TRACTOR. CABLE WAS STUCK SO EE TRIED TO PULL CABLE OFF OF DRUM. CABLE ON DRUM WAS BACK LASHED AND SUCKED EE'S HAND BETWEEN FRAME AND ROL LER ON BACK OF MACHINE. HAND BECAME PINCHED.

EE WAS ARC AIRING A STICK EYE BUSHING ON A SHOVEL WHEN HOT SLAG BURNED A HOLE THRU HIS PANT & PURNED HIS KNEE. OFF THE JOB 5/11/98.

WHILE USING A HAND HELD GRINDER A PIECE OF METAL FLW OFF OF THE EDGE OF THE STEEL AND ENTERED HIS LEG. THIS REQUIRD MMINOR SURGERY AND STITCHES.

INJURED WAS STANDING NEXT TO A TRUCK CRANE. WHEN THE OPERATOR BEGAN TO PUT DOWN THE OUTRIGGERS. THE OUTRIGGERS LANDED ON HIS FOOT.

EE WAS WORKING WITH ANOTHER EE TO CLEAN THE GUNNING MACHINE. EE STUCK HIS FINGER INSIDE THE GUARD & CLIPPED THE END OF HIS FINGER OFF

HE WAS ORGANIZING THE WORK AREA AND MOVING LINERS. BY MOVING THE LINERS HE KICKED UP SOME DUST AND THE FAN BLEW DUST AND DIRT INTO HIS EYES. THEY WERE WORKIGN ON MILL LINE 22- PRIMARY MILL.

EE AND OTHER EE HAD JUST FINISHED LOOKING AT 4 DUST COLLECTOR ON UNTI 1. AS HE STARTED UP THE STAIRS TOWARD THE COOLER DUMP POINT, A LARGE AMOUNT OF HOT DUST BLEW OUT OF THE WEST FEEDER INTO T HE AIR, HE HAD BURNS ON HIS HANDS, FINGERS, ARMS, AND FACE FROM THE HOT DUST.

A CRANE WAS BEING USED TO HOIST THE SPIDER CAP IN THE CRUSHER. THE CHAIN BROKE AND THE CHAIN RING SWUNG AND STRUCK THE INJURED ON THE KNEE. THE CRANE WAS NOT CENTERED OVER THE LOAD AND THE INJ URED WAS NOT WATCHING THE OPERATION.

INJURED WAS HELPING RETORQUE A PRODUCTION TRUCK TIRE. THE WRENCH SLIPPED CAUSING HER TO STUMBLE. SHE FRACTURED HER LEFT ANKLE.

EE REPLACED THE RETAINER ON THE SOCKET OF A IMPACT WRENCH WITH WELDING ROD. THE ROD STRUCK HIS HAND CAUSING A LACERATION REGUIRING STITCHES.