Buscar en el registro

EMPLOYEE WAS GRINDING ON A WELD ON A CARBON COLUMN. HE WAS WEARING GLASSES BUT A PIECE OF METAL STILL GOT IMBEDDED IN HIS RIGHT EYE.

GREASING 6THE ROD END ZERK ON STEERING CYLINDER WHEN THE PRESSURE WAS APPLIED THE GREASE SHOT OUT BETWEEN THE FITTING AND STRUCK HIS SAFETY GLASSES AND GOT INTO HIS EYE.

EMPLOYEE WAS CUTTING BOLTS ON THE SCREEN DECK WITH A CUTTING TORCH.HE HELD THE TORCH TO THE SIDE WHILE HAMMERING THE BOLT THROUGH.THE TORCH SHIFTED AND CAME IN CONTACT WITH HIS LEFT BOOT.NO SI GNS OF DAMAGE TO THE BOOTBUT EXTREME HEAT BURNT HIS ANKLE.

EE WAS LOADING THE BLAST PATTERN ON THE EAST, SLOPE OF THE LOWER MAIN PIT. THE PRELL BULB TRUCK WAS LEANING ON THE SLOPE AND WHEN THE OPERATOR SWUNG THE BOOM AROUND TO THE OTHER SIDE OF THE TR UCK, THE HYDRAULICS WOULD NOT HOLD AND THE BOOM SWUNG AROUND AND HIT HIS ON THE HEAD.

EMPLOYEE WAS GRINDING ON A PIECE OF STEEL. GRINDER KICKED BACK, STRIKING EMPLOYEE ON CHIN.

WHILE WELDING ON A SHAKER SCREEN, EE GOT FLASH BURN TO EYES FROM ANOTHER WELDER WHO WAS WELDING NEXT TO HIM.

EMPLOYEE WAS WASHING A HAUL TRUCK WITH THE STEAM CLEANER. HE WAS WEARING SAFETY GLASSES, BUT SOMETHING GOT PAST THEM AND GOT IN HIS RIGHT EYE.

EMPLOYEE HAD PARTICAL OF STEEL OR SLAG FROM WELDING OR GINDING ENTER INTO HIS RIGHT EYE

INJURED WAS CRUSHING OIL FILTERS. THE GUARD GOT STUCK IN THE UP POSITION. HE TRIED TO FREE IT WHEN IT CAME LOOSE NAD PINNED BOTH OF HSI HANDS BETWEEN THE GUARD AND BASE.

WAS WELDING ON AND OFF ALL DAY. AFTER HISFT ENEDED AND EMPLOYEE WAS HOME HIS EYES STARTED TO BURN. WENT TO DR. WAS TREATED FOR ARC FLASH BURNS AND GIVEN A PRESCRIPTION FOR ANITIBIOTIC.

CUTTING 1/2 MOON OFF CORNER PLATE. AS THE CUT FINISHED THE PIECE SWUNG DOWN STRIKING THE EMPLOYEE IN THE LEG.

EMPLOYEE HAD BEEN WELDING AND GRINDING ALL DAY UNDER A HAUL TRUCK. A VENTILATION FAN WAS SET UP, HE WAS WEARING SAFETY GLASSES AND WELDING HOOD. AT END OF DAY HE HAD FOREIGN MATTER IN HIS EYE.

BOLTING DOWN ROLLERS ON CONVEY, USING AIR IMPACTWRENCH HOLDING NUT WITH FREE HAND, NUT TURNED LEAVING 2 SM CUTS ON FINGER INFECTION IN FINGER

WELDING ON PIECE OF EQUIPMENT & BURNED LEFT EYE.

EMPL AND CO-WORKER TAKING LEFT HYDRAIR OFF 50 TON HAUL PAK WITH 1" AIR WRENCH WITH 4" SOCKET ATTACHED.WHEN NUT OF HYDRAIR CAME OFF,AIR WRENCH FELL TOWARDS INJ AND HIT HIM IN RIGHT SIDE OF FACE

EMPLOYEE WAS CLEANING UP AROUND THE MILL CRUSHER WHILE DOING THIS A ROCK FLEW OVER THE PROTECTOR ON THE CRUSHER HITTING HER ON THE RIGHT CHEEK UNDER HER SAFETY GLASSES.

HE WAS BACKING CAT UP ON ORE PILE HIT A ROCK AND BOUNCED CAT UP.WASN'T WEARING BELT,CONSEQUENTLY JOLTED OPERATOR UP THEN SLAMMED HIM BACK DOWN IN SEAT.

HE WAS HELPING WELDER WHEN A WELDING FLASH BURNED HIS EYES.

EMPL CHANGING RIPPER SHANK ON DOZER USING AIR SH CHISEL TO DRIVE PIN OUT.PIECE OF CHISEL BROKE STRIKING EMPL IN FOREHEAD.

EMPL WAS DRILLING A 5 1/2 INCH HOLE IN THE PIT WHEN HE OBSERVED A ROCK IN THE HOLE NEXT TO THE ROTATING DRILL STEEL HE REACHED INTO THE HOLE TO REMOVE THE ROCK HIS HAND WAS CAUGHT BY THE ROTAT ING STEEL TWISTING HIS LITTLE FINGER OUT OF SOCKET

EMPLOYEE WAS HELPING TO REPLUMB CYCLONE FEEDER. WHILE HOLDING THE BLOCK ON THE CRANE SUPPORTING THE FEEDLINE, ANOTHER EMPLOYEE CUT THE BRACE LOOSE FROMT HE DECK. WHEN THE LINE CAME LOOSE IT CAUGHT HIS LEFT HAND BETWEEN THE BLOCK AND THE PIPE.

PUTTING METAL BRACES BETWEEN MUFFLERS.DRILL GOT CAUGHT AND TWISTED HAND.

THE EMPLOYEE WAS HELPIGN TO TIGHTEN A WARE PLATE BOLT ON A CAT 992-C LOADER. HE WAS HOLDING THE BOLT WITH A STICK WHILE THE MECHANIC'S HELPER TIGHTENED IT WITH AN IMPACT WRENCH. THE STICK SL IPPED ALLOWING THE BOLT TO SPIN, PULLING THE EMPLOYEE'S HAND INTO THE BOLT.

HE WAS WELDING AND GRINDING ALL MORNING HIS EYE BECAME IRRIATATED. WHILE FLUSHING EYE A PIECE OF METAL WAS REMOVED. THE NEXT MORNING HIS EYE WAS STILL INFLAMMED AND HE WENT TO DOCTOR AND REM OVED ANOTHER PIECE.

THE INJURED WAS HELPING THE WELDER WELD REBAR.HE WAS HOLDING THE REABR IN PLACE TO BE WELDED OVER THE WHOLE DAY.IN THE MORNING HIS EYES WERE SORE AND HE WENT TO THE DOCTOR ON 06-01-89. THE DOC TOR PRESCRIBED CORTISPORIN OPTH OINTMENT FOR CONJUNCTIVITIS.

EMPL WAS TRYING TO ADJUST FAULTY GOVERNOR ON WELDING MACHINE WHILE MACHINE WAS RUNNING GOT FINGER TO CLOSE TO FAN FAN HIT L HAND

EMPLOYEE WAS PULVERIZING A SAMPLE SHE CLEANED OFF THE PLATE & GOT TOO CLOSE TO THE SPINNING PLATE CUTTIANG HER FINGER

EMPLOYEE WAS PULVERIZING SAMPLES WHEN SHE BROKE OUT IN A RASH ON HER ARMS.

EMPLOYEE WAS LAYING OUT ROCK HOPPERS FOR WELDING. FELLOW EMPLOYEE STARTED GRINDING METAL, THROWING SPARKS AND METAL CHIPS. A PIECE OF METAL WENT INTO HIS EYE.

EMPLOYEE HAD BEEN PREPARING SAMPLES & OPERATING PULVERIZER FOR THE SHIFT WHEN SHE GOT READY TO GO HOME SHE NOTICED REDNESS ON HER FOREARMS SHE WENT TO THE CLINIC THE NEXT DAY

EMPL WAS CHANGING TEETH ON LOADER USING IMPACT CHISEL BIT SLIPPED OFF PIN AND PUNCTURED R LITTLE FINGER ALL THE WAY THROUGH

EMPL WAS OPERATING PRIMARY CRUSHER WHEN BOULDER CAME OVER TOP OF HOPPER SMASSHING LEFT FINGER & PUSHING ELBOW INTO RAILING.

EMPL WAS CLEANING OUR PLVERIZER WITH AIRHOSE. AIR HOSE HAS LONG EXTENSION & IT GOT CAUGHT ON BOLT IN BACK IT PULLED HAND INTO PULVERIZER SMASHING HAND ON OPEN LID.

EMPL WAS PULVERIZING SMAPLES IN LAB WHEN SHE RECEIVED DIRT IN EYE. EMPL WAS WEARING SAFETY GLASSES AT TIME.

EMPLOYEE WAS TAKING CARBON READINGS OUT OF CIP TANKS.HE WAS USING LEATHER GLOVES RATHER THAN RUBBER.