Buscar en el registro

Allegedly, while removing chunck from gyp feeder, employee was hit in the face when large chunk came down hitting bit on chipping gun.

EE was performing work on the clinker cooler grate line.

EE WAS GRINDING ON A PIECE OF CHANNEL IRON WHEN THE PIECE SLIPPED OFF THE WHEEL OF BENCH GRINDER ALLOWING LEFT HAND TO MAKE CONTACT WITH GRINDER.

ALLEGEDLY, WHILE TRYING TO CLEAN OUT AN AIRSLIDE, PRESSURIZED AIR BLEW DIST INTO EMPLOYEE'S EYES.

JACKHAMMERING CHUNCKS OUT OF COOLER AT CLINKER BREAKER SOUTH SIDE DOOR WHEN CHUNCK FLEW OUT AND STRUCK EE ON LEFT JAW.

ALLEGEDLY, EE WAS TRYING TO SECURE A WATER HOSE TO A WATER GUN, WHEN THE LINE BLEW OFF AND EE FELL DOWN A 4' EMBANKMENT JAMMING HIS SHOULDER IN THE GROUND.

WHILE GRINDING A SHIM, THE SHIM KICKED OUT FROM GRINDER AND SMASHED FINGER.

THE AUTO REPAIRMAN INTENDED TO REPLACE LOUVRE ON AIR CONDITIONER. ALLEGEDLY HE TUNED THE SWITCH TO OFF POSITION BUT THE SWITCH MOVED TOO FAR AND THE FAN CAME BACK ON. BELIEVING THE FAN WAS OFF , THE REPAIRMAN PUT HIS HAND INTO THE FAN AND INJURED HIS FINGER.

WORKING SECURITY QUARRY, ST LAWRENCE CEMENT. JACKHAMMER OUT OLD LINERS. JACKHAMMED BIT CUT LITTLE FINGER. JACKHAMMER SLIPPED CATCHING FINGER REQUIRED 4 STITICHES.

WHILE BLOWING DOWN MILL BLDG WITH AIR LANCE, EE RAN ELBOW INTO A STEEL BEAM.

REMOVING STICK JACKHAMMER BIT FROM CONCRET E FLOOR INJURY WAS A STRAINED LOWER BACK

ALLEGEDLY WHILE USING A CHIPPING GUN TO BREAK UP CHUNKS IN SILO #94, A LARGE CHUNK BROKE OFF STRIKING THE END OF THE CHIPPING GUN BIT, CAUSING GUN TO PIVOT STRIKING THE VICTIM IN THE EYE.

ALLEGEDLY VICTIM WAS CLEANING CHUTE TO THE COAL MILL WITH AN AIR LANCE WHEN AIR LANCE WAS INSERTED IN CHUTE A PIECE OF COAL FLEW OUT & STUCK VICTIM IN RT EYE

INJURED PERSON WAS USING ELECTRIAC CHAIN HOIST, HE WAS NOT WATCHING THE CHAIN MOVEMENT. THE HOOK GOT HUNG UP ON AN OBSTRUCTION. INJURED PERSON CONTINUED TO POWER UP THE HOIST. TENSIONING THE C HAIN, WHEN IT SLIPPED LOOSE, IT HIT HIM ON THE HARD HAT.

ALLEDGEDLY WHILE SANDING THE SHAFT OF A MOTOR WHILE REWING, HE GRABBED IT WITH LEFT HAND WITH SANDPAPER WRAPPED AROUND THE SHAFT. MOTOR WAS RUNNING.

INJURED WAS GRINDING A PIECE OF METAL WITH A HAND GRINDER WHEN A SMALL PIECE OF MATERIAL FLEW INTO HIS LEFT EYE. HE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS CHANGING ON AIR-FILTER ON 1K53 SULLAIR COMPRESSOR HE HAD THE FILTER BYPASS VALVE OPEN AND WHEN FINISHED. WENT TO CLOSE THE VALVE. THE TOP BLEW OFF AND THE DIRT AND AIR IN THE LI EN HIT HIS ARM CAUSING A FRICTION BURN.

WINDING UP HOSE ON GUN TWISTED TO PULL ON HOSE FELT BACK PULL OUT

INJURED TRYED TO REST A BURNING TORCH ON A METAL SAW HORSE THE TORCH FELL THE INJURED ATTEMPTED TO GRAB THE FALLING TORCH AND HIS HAND WENT IN FRONT OF THE TORCH FLAME BURNING HIS GENERAL DUTY GLOVE AND HIS RIGHT HAND.

EMPLOYEE WAS CLEANING KILN DUST TANK WITH AIR LANCE.REMOVING DUST FROM TANK BY PROBING WITH LANCE THROUGH OVERHEAD PORT HOLES IN TANK.LARGE AMOUNT OF DUST BROKE FREE AND SPILLED DUST IN EMPLOY EES FACE.

WELDING WHILE KNEELING CAUSED PAIN AND SWELLING IN KNEE

EMPLOYEE ALLEGES WHILE USING AN AIR OPERATED CHIPPING HAMMER TO REMOVE CLINKER DUST BUILD-UP FROM A CONVEYOR FRAME THAT MATERIAL BLEW IN HIS FACE. HE WAS WEARING SAFETY GLASSES. THE NEXT DAY H IS EYE WAS EXAMINED AND RUST PARTICLE REMOVED. RX GIVEN FOR INFECTION.

EMPLOYEE WAS REMOVING SPIRAL STAIRCASE & TORCH CUTTING TO FREE SUPPORTS EMPLOYEE CUT A PIPE & STEPPED OFF HIS WORK PLATFORM TO CLEAN DEBRIS WHEN HE STEPPED OFF HIS RUMP STRUCK THE PIPE HE HAD JUST CUT

EMPLOYEE WAS CLIMBING STAIRS TO RETURN TO WORK AREA WHILE REPAIRING AN ELEVATOR ANOTHER EMPLOYEE WAS TORCH CUTTING POIECES FROM THE ELEVATOR & A PIECE DROPPED TO THE STAIRS BELOW & STRUCK THE EMPLOYEE

EMPLOYEE WAS CUTTING OUT SECTION OF TOP PLA TE ON FRINGE BIN HE WAS HOLDING PIECE IN HIS LEFT HAND & CUTTING WITH TORCH IN HIS RT HAND WHEN PIECE WAS CUT FREE EMPLOYEE GRABBED FOR IT TO PREVEN T IT FROM FALLING WITH HIS RT HAND TORCH IN HIS RT HAND WENT INTO HIS GLOVE ON HIS LEFT HAND

REMOVING MATERIAL FROM PIT AT FINISH MILL FEEDER.LIFTING MATERIAL FROM PIT WITH AIR HOIST BASE BOLT HOLDING HOIST BROKE OR CAME FREE.HOIST STRUCK EMPLOYEE.

INJ DOWN ON KNEES USING PORTABLE GRINDER TO CUT AWAY A WELD BUILD UP METAL.WHILE USING GRINDER HE CAUGHT ROUGH EDGE OR LARGE AMOUNT OF WELD WHICH CAUSED GRINDER TO DIG IN & TWIST.EMPL LOST CON TROL OF GRINDER AND EDGE OF GRINDING DISC STRUCK HIS KNEE.

INJURED ALLEGES THAT WHILE WELDING THIS AM, HIS EYE STARTED TO BOTHER HIM A LITTLE. HE NOTICED HIS EYE BECOMING RED AND A LITTLE UNUSUAL FEELING. HE STATED HE DID NOT RECALL ANY OBJECT STRIKIN G HIS EYE BUT THOUGHT THIS MAY BE "WELDERS FLASH". HE HAD ON TINTED SAFETY GLASSES AND WELDERS HOOD. RESULTED IN CONJUNCTIVITIS AND RX MEDICATION. ? AS MSHA REPORTABLE.

INJURED STATES HE WAS AIR LANCING CLINKER BUILDUP AT THE KILN HOOD WHEN HOT CLINKER BLEW BACK AND STRUCK HIS ARMS AND NECK. HE WAS WEARING A HARD HAT AND SAFETY GLASSES FOR PERSONAL PROTECTION . RESULTED IN SECOND DEGREE BURNS TO FOREARM.

INJURED STATES HE WAS APPROACHING KILN OBSERVATION WINDOW TO LOOK INTO KILN. WHILE CLIMBING STEPS HE WAS PLACING A PROTECTIVE FACE SHIELD IN FRONT OF HIS FACE. A PUFF OF SAND BLEW OUT OF OBSER VATION WINDOW BEFORE SHIELD WAS IN PLACE AND STRUCK HIS FACE AND EYES. REQUIRED RX MEDICATION TO ONE EYE.

TAMROCK DRILL HAMMER LIFT CHAIN BROKE & END STRUCK EMPL ON LEFT SIDE OF CHIN FX LOWER JAW BILATERALLY.

INJURED WAS USING A PIPE THREADING MACHINE TO THREAD BLACK PIPE. PIPE HAD AN ELBOW AND SHORT PIPE ON THE OTHER END OF PIPE. PIPE TWISTED WITH THREADING HEAD PINNNING END OF INJUREDS FINGER B ETWEEN ELBOW SHORT END AND THREADING MACHINE FRAME.

WHILE USING A CHIPPING GUN BIT BROKE AND STRUCK INJUREDS ARM BIT WAS WELDED WITH AN EXTENSION WELD BROKE

WHEN USING CUTTING TORCH IN CUTTING UP SCRAP STEEL, SPARK GOT INSIDE OF COAT SLEEVE CAUSING BURN TO LEFT FOREARM.

EMPLOYEE ALLEGE8 HE STEPPED BACK AND HAND WENT THROUGH MESH OF FAN BLADE GUARD FOR PORTABLE FAN. THUMB STRUCK BY FAN BLADE CAUSING A LACERATION.

AFTER FINISHING3JACKHAMMERING, EMPLOYEE RESTED HAMMER ON HIS LEFT FOOT AND ACCIDENTLY SQUEEZED TRIGGER, CAUSING HAMMER TO GO OFF. *NOTE: EMPLOYEE WAS ISSUED METATARSAL FOOT PROTECTION WHICH WA S NOT IN USE AT3THIS TIME.

INJ USING JACKH5MMER TO REMOVE CASTABLE.HE WAS STANDING ON WOODEN PLANK ACROSS KILN TO PROVIDE FLAT WORK SURFACE AND ELEVATION.WHEN JACKHAMMER BROKE THROUGH CASTABLE IT BEGAN TO FALL EMPL HUNG ONTO JACKHAMME9 CAUSING MUSCLE STRAIN TO GROIN AREA.

WHILE HOISTING DRILL ROD AND WATER SWIVEL FOR DRILLING CLAIMANT WAS STANDING BY READY TO TIGHTEN IN SWIVEL CAUGHT THE THREADS AND HIT HIM IN CHEST

WHILE ATTEMPTING TO WELD CRANE BUCKET ARM, INJURED SLIPPED, DISLODGING ARM FROM CLAMP CAUSING ARM TO HIT INJURED\S RIGHT HAND, CAUSING A FX TO HIS SECOND DIGIT METACARPAL.