Buscar en el registro

WHILE WORKING ON LOADER, REPLACING STEP; REMOVING BOLT & STEP, ASSEMBLY PIVITED; STRIKING L. FINGER. DIAGNOSED 5/10/05, FRACTURE.

EE WAS CHECKING A SOLENOID ON A WELDING MACHINE WHEN HIS THUMB GOT CAUGHT IN THE FAN.

EE WAS MOVING WASTE AT PLANT #2 WITH TRACKHOE, MATERIAL FELL OFF SIDE OF BUCKET SPLASHING SAND & WATER INTO LEFT EYE.

KNEELING ON GROUND, GRINDING, STTOD UP TO REPOSITION HIS BODY AND WHEN HE TURNED HEARD SOMETHING POP AND HIS BACK STARTED HURTING.

TWO HEAVY DUTY REPAIRMEN WERE TRYING TO EXTRACT A BROKEN TRACK FROM UNDERNEATH A DOZER WHEN AN EE, WHO WAS STANDING ADJACENT TO THE DOZER WAS STRUCK BY THE CHAIN THAT DISLODGED FROM THE TRAC K.

EE AND OTHER CHANGED PONTOON LOCATION TO PUMP WATER. WENT TO PONTOON IN BOAT-PUMP WAS RUNNING BUT NOT PUMPING WATER TURNED PUMP OFF STARTED REMOVING PLUG HAD WATER AND PRESSURE IN LINE BLEW WA TER AND MUD IN EE FACE. WATER WAS WARM.

I/E WHILE REMOVING BELLY PAN FROM LOADER, PAN FELL FROM ITS POSITION AND SMASHED LITTLE FINGER ON LEFT HAND BETWEEN IMPACT WRENCH AND PAN.

EMPLOYEE WAS CUTTING THE BARRELL OUT OF AN OLD SHAKER AND A PIECE OF METAL CAME UP BETWEEN HIS GOGGLES AND HIS FACE AND GOT IN HIS EYE.

EE WAS GRINDING A PIECE OF STEEL. GOT A STEEL SHAVING IN HIS LEFT EYE.

EE WAS DISCONNECTING POWER SUPPLY TO JAW CRUSHERWHEN HE HIT THE DISCONNECT HANDLE. THE HANDLE WAS HOT AND CREATED A HEAT FLASH.

EE WAS USING A BAND SAW TO CUT A BLOCK OF WOOD. WOOD WAS NOT SECURED WHEN THE SAW TEETH CONTACTED THE PIECE OF WOOD, IT GRABBED AND PULLED HIS HAND INTO THE BLADE.

HIT RIGHT ELBOW ON INSIDE DOOR OF DOZER.

AFTER AN EXTENDED PERIOD OF TIME SPENT IN A BENTPOSITON WELDING EE STOOD UP & BACK OF LEFT HIP WAS IN PAIN

EMPLOYEE WAS UNCHOKING THE CRUSHER WHEN THE INSPECTION DOOR ON THE CRUSHER FELL ON HIS RIGHT FOOT, CAUSING A FRACTURE.

THE EE WAS DRILLING OUT A BROKEN U-JOINT, A PIECE OF METAL FLEW OUT OF HOLE, AND BECAMED EMBEDDED IN THE RIGHT EYE.MEDICAL TREATMENT GIVEN.

CUTTING ANGLE IRON WHEN A PIECE OF SLAG ENTERED INTO EYE.

EMPLOYEE ADDING OIL TO ENGINE OF LOADER WHEN HAND SLIPPED INTO COOLING FAN OF ALTERNATOR FAN LACERATING MIDDLE FINGER OF RIGHT HAND.

WHILE USING A DRILL TO DRILL A HOLE, DRILL SEIZED UP AND HE PULLED HIS RIGHT SHOULDER.

WHILE EMPLOYEE WAS CLEANING A GREASE FITTING ON A BEARING THE MOVING SHAFT CAUGHT THE RAG AND THE PRESSURE FROM THE TWISTED RAG FRACTURED HIS FINGER.

WHILE WORKING IN A DARK BUNKER, EE REMOVED HIS CUTTING GOGGLES & A HOT SPARK ENTERED HIS LEFT EYE.

EE WAS STEAM CLEANING UNIT. WHEN HE CRAWLED UP INTO BACK OF TRUCK HE LAYED WAND DOWN. WHEN HE PICKED IT UP IT SLIPPED, HITTING HIM ON LEFT ANKLE.

WHILE WELDING A STRAP ON THE WELDING BENCH A LOOSE PIECE OF PIPE ROLLED OFF THE BENCH AND SMASHED RIGHT THUMB.

EE WAS WORKING ON THE 2400 CRUSHER USING A CUTTING TORCH WHEN THE RING THEY WERE CUTTING ON BROKE LOOSE AND DROPPED ON EE'S FOOT.

EMPLOYEE WAS WELDING ON IMPACT CRUSHER WHEN PIECE OF HOT FLUX HIT HIM IN THE LEFT EYE.

LOST PART OF INDEX FINGER, MIDDLE FINGER, RING FINGER AND LITTLE FINGER (LEFT HAND). EMPLOYEE WAS PUTTING CABLE BACK ON PULLEY THAT WAS ATTACHED TO SPUD, SPUD SLIPPED LOOSE AND PULLED THE EMPL OYEE'S HAND INTO THE CABLE & PINCHED OFF HIS FINGERS.

OPERATOR WAS SITTING IN SEAT OPERATING DRAGLINE WHEN PEDAL SLIPPED CAUSING STRAIN TO OCCUR IN BACK.

WHILE REMOVING BOLTS FROM A CUTTING EDGE, EMPLOYEE GRABBED A SPINNIGN BOLT AND THE BOLT HEAD CUT THROUGH HIS GLOVE AND CUT HIS FINGER.

MECH WAS GRINDING PIN WHEN PIN SLIPPED CAUSING FINGER TO COME IN CONTACT WITH GRINDING WHEEL, CUTTING LITTLE FINGER.

OBSERVING LETTING COUNTER WEIGHTS DOWN FROM DRAGLINE FELL WHILE BEING LOWERED BEAM HIT EMPLOYEE BREAKING RIGHT ARM

LETTING COUNTER WEIGHTS DOWN ON 4500 DRAGLINE COUNTER WEIGHTS FELL OFF BEAM BEAM SWUNG BACK HIT EMPLOYEE JAMMED ARMS BRUISED CHEST

EMPLOYEE WAS TIGHTENING A BOLT, USING AN IMPACT WRENCH, THE BRACKET TURNED & CUT HIS FINGER.

OPERATOR WAS SITTING IN SEAT OF DRAGLINE WHEN UNKNOWN OBJECT FLEW INTO HIS EYE. OPERATOR HAD GLASSES ON & WHEN HE WENT TO DR. NOTHING WAS FOUND IN EYE.

OILER WAS GETTING PUMP READY TO PULL OUT OF PIT PUMP HAS STUCK UP MUD CAUSING PUMP NOT TO PUMP WATER.HE OPENED RELIEVE VALVE TO LET OFF PRESSURE.STEAM WAS COMING OUT OF RELIEF VALVE.HE TOOK OF F DISCHARGE LETTING STEAM AND MUD OUT OF DISCHARE ON TO HIS FACE,ARM AND HAND.

WHILE ALTERNATING BETWEENWELDING & GRINDING METALGRINDINGS LODGED IN EMPLOYEES HAND METAL GRINDINGS ENTERED LEFT EYE

EE ALLEGED THAT WHILE HE WAS BEATING THE COLLAR ON THE ROCK DRILL SOMETHING HIT HIS EYE. EE SAID HE THOUGHT IT WAS JUST DIRT AND DID NOT TELL HIS SUPERVISOR UNTIL THE FIRST DAY OF THE NEXT WEE K, AFTER HAVING GONE TO THE EMERGENCY ROOM OVER THE WEEKEND. THE FOREIGN BODY WAS REMOVED AND HE WAS GIVEN EYE DROPS.

EE WAS DRESSING UP GEAR WITH DIE GRINDER WITH A THIN DISC ON GRINDER. WHILE HE WAS USING GRINDER AT FULL RPM, DISC EXPLODED AND CUT INTO HIS ARM.

EMPLOYEE COMPLETED HIS DUTIES ON 12-21-94 WITH NO NOTICEABLE INCIDENT HE WOKE UP THE NEXT DAY WITH DISCOMFORT IN HIS RT EYE HE WENT TO THE DOC & HE FOUND A PIECE OF WELDING SLAG IN HIS EYE

AS EMPLOYEE WAS GRINDING A PIECE OF STEEL, A SMALL PIECE OF METAL ENTERED HIS RIGHT HAND.

WHILE WORKING ON AA ROCK DRILL EE OPENED A VALVE TO RELEASE PRESSURE AT WHICHTIME SMALL ROCK FRAGMENS BURSTED OUT. EE'S ARM WAS HIT WITH SEVERAL ROCK FRAGMENTS. EE HAD NO IDEA THAT ONE HAD L ODGED IN HIS RIGHT ARM UNTIL IT GGOT RED AND SWELLED UP, AT WHICH TIME HE REPORTED THIS TO HIS SUPERVISOR ON 12-16-94 AND WENT TO THE D ON 12-1-694.

EMPLOYEE WAS CLEARING COBWEBS FROM ELECTRICAL CONTROL BOX WITH WEBER HAND VACUUM. STRAINING CHEST AND BACK MUSCLES.

EMPLOYE EWAS GRINDING A PULLEY WITH A HAND ELTNIC GRINDER AND METAL PIECES FLEW INO BOTH EYE.

JESUS WAS WELDING ON DOORS OF THE SILO HE HAD WELDED A BAR BETWEEN THE DOOR TO KEEP THEM OPEN THE WELD BROKE THE DOORS CLOSED ON HIM

EMPLOYEE WAS OPERATING A BACKHOE WHEN THE GROUND GAVE WAY AND THE MACHINE TURNED OVER ON ITS SIDE. THE EMPLOYEE WAS THROWN UPWARD AND HIT HIS TAILBONE ON THE RAIL OF THE MACHINE. HE HAD A FRAC TURED TAILBONE.

EE WAS CLEANING BUILD UP OF MUD FROM RETURN IDLER ON CONVEYOR BELT AND GOT HAND AND ARM IN IDLER.

EMPLOYEE WAS FEEDING PRIMARY CRUSHER FROM BACK WHEN HE PUMPED A BUCKET OF MATERIAL IN. HE FELT SOMETHING IN HIS LEFT EYE, WASHED EYE OUT WITH EYE WASH THINKING IRRITATION WOULD PASS. EMPLOYEE HAD WINDOW OPEN AND WAS WEARING SAFETY GLASSES.

EE WAS CUTTING WELD ON LOADER WITH CUTTING TORCH AND PIECE OF HOT SLAG HIT EMPLOYEE IN EYE. THIS RESULTED IN SERIOUS BURN OF THE CORNEA IN THE LEFT EYE.

WHILE WELDING ON CULVERT PIPE SLAG SPLATTERED OUT & ENT ERED THE LEFT FOREARM OF EE HE DID NOT NOTICE THE INFECTION UNTIL SEVERAL DAYS LATER & NOTIFIED HIS SUPERVISOR ON 10-04-93 HE WENT TO T HE EMERGENCY ROOM ON 10-04-93

EMPLOYEE WAS PUTTING BOLTS IN MASABI FRAME. HE WAS USING A DRY GRINDER WHEN A PIECE OF METAL FLEW IN HIS LEFT EYE.

EMPLOYEE LOST POWER TO THE MAGNETIC BASE OF A DRILL CAUSING THE DRILL TO FALL AND STRIKE THE EMPLOYEE'S FOOT FRACTURING THE 5TH TOE OF THE RIGHT FOOT.

EMPLOYEE WAS HOLDING A PIECE OF STEEL BAR WHILE THE WELDER WAS WELDING AND THE GLARE BURNED HIS EYES. HE WAS WEARING SAFETY GLASSES.