Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
While tightening a bolt on a jaw crusher, the employee felt a twinge to his back.
Employee was being loaded. Loader backed up before bucket was clear. Truck leaned back then released, rocking it sideways causing injury to employee's back.
WHILE WORKING ON LOADER, REPLACING STEP; REMOVING BOLT & STEP, ASSEMBLY PIVITED; STRIKING L. FINGER. DIAGNOSED 5/10/05, FRACTURE.
Ee was cleaning up around conveyor belt using a shovel & 1 1/2" water hose. When he returned to his ladder he felt a pain in his left shoulder (strain/sprain). This was initially under investigation by ins. co. for possible connection to prior injury - insurance company accepted claim as a new claim 10-14-04.
EMPLOYEE WAS OPENING DOOR OF CRUSHER TO EXAMINE INSIDE. HE WAS USING A PRY BAR TO RELEASE SAFETY LOCK. WHEN THE LOCK BROKE FREE HIS LITTLE FINGER WAS PINCHED BETWEEN THE PRY BAR & THE DOOR.
Ee was working on a ladder. He reached for his meter when he and the ladder both fell 8' to the ground. He hit his right shoulder on a pipe and then landed on his left shoulder.
EMPLOYEE WAS WALKING AROUND CHASING IRON AND STEPPED ON GROUND THAT WAS UNEVEN BECAUSE OF RAIN AND TRACKS TWISTING HIS ANKLE.
Shaker on plant was locked up, ee was checking vee belts to see if they were tight or not. the counterweight rolled down, and lodged ee's hand between vee belts and the sheave. the ee's left hand received a laceration on his 1st finger requiring 5 stitches, and a severe bruise on his 2nd finger.
EE LIFTED THE GANG BOX DOOR UP, PUSHED THE DOOR IN AND THE LID FELL STRIKING HIS CHEEK. CHEEK WAS LACERATED REQUIRING STITCHES.
employee was stepping down the ladder on stacker belt, foot slipped off step and put all his weight on left shoulder. He is off duty and taking physical therapy. He has a follow up appointment with the doctor April 7. He has a left shoulder girdle sprain.
EE WAS COMING DOWN OFF THE PIT. ABOUT HALFWAY DOWN EE LOST HIS FOOTING & FELL, CATCHING HIMSELF WITH HIS R. ARM & JAMMING HIS R. SHOULDER. DOCTOR PUT EE ON MUSCLE RELAXERS & EE RETURNED TO WORK FULL DUTY. ON 4/13/04 AROUND 10:10 AM, EE WAS LOADING 30" IDLERS INTO BACK OF PICKUP, REINJURING HIS RIGHT SHOULDER. TAKEN TO EMERG. ROOM FOR X-RAYS. PUT OFF DUTY & PT 4 DAYS/WEEK.
employee was pulling punch plate on bottom of deck inside of 6 x 16 shaker at plant 3 (crusher), strained back and was put on light duty.
Shovel struck rear of haul truck waiting to be loaded.
EE WAS REMOVING AND INSTALLING DREDGE PIPE TO PLANT #2, INSTALLING BOLTS IN PIPELINE. SPRAINED LOWER BACK. EE IS TAKING A MUSCLE RELAXER AND AN ANTI-INFLAMMATORY MEDICATION.
EMPLOYEE COMPLAINED OF BACK PAIN WHILE OPERATING #5114 LOADER.
OPERATOR PULLED WRONG LEVEL ON PUMP. PUMP SWUNG AND HIT FACE AND NOSE (9 STITCHES).
EE WAS SHOVELING MATERIAL NEAR ONE OF THE CRUCHERS WHEN THE WIND BLEW DUST INTO HIS EYE.
NO RESTRICTIONS. EE WAS BACKING DOWN THE HOPPER RAMP IN HIS LOADER, TURNED HIS HEAD TO THE RIGHT AND HIS NECK POPPED, HAS PAIN IN HIS NECK AND SHOULDER. WAS SENT TO THE MCLEROY CLINIC ON 11-3- 03 FOR A CHECK UP. HIS NECK DID NOT GET ANY BETTER SO ON 11-10-03 HE WAS SENT TO GAINESVILLE MEMORIAL HOSPITAL. STARTED PHYSICAL THERAPY ON HIS NECK, GETTING MOIST HEAT, ELECTRICAL STIMULATIO
EE BLOCKED A SHAFT TO PUT A STRAP AROUND IT, AND IT ROLLED OFF ONTO HIS RIGHT FOOT.
employee stumbled while climbing up bank from dredge at end of his shift. He hurt his left hip and knee. This was reported as information only-no medical treatment sought. His left knee started hurting him and he had an MRI done-small tear in left knee. He had surgery on his knee on April 19, 2004. He has been working full time until the date of his surgery on April 19.
EE WAS LOOSENING AND TIGHTENING BOLTS AND PICKING UP ON 5 FT DREDGE SLEEVE. EE WAS SENT TO DR FOR CHECKUP AND IS ON LIGHT DUTY FOR TWO WEEKS. HAS A FOLLOW UP APPT. 10-10-03.
EE WAS LOADING SCREENS INTO BACKHOE BUCKET, ONE SCREEN SLID OUT OF BUCKET HITTING EE ON THE TOP OF LEFT FOOT.
OPERATOR WAS ATTEMPTING TO DISCONNECT TRAVERSE CABLE FROM THE DREDGE. THE CABLE WAS STILL UNDER TENSION AND THE OPERATOR WAS IN FRONT OF THE CABLE.WHEN HE LOOSENED THE CLAMP THE CABLE SLIPPED FORWARD STRIKING HIM.
EMPLOYEE WAS PUTTING THE OIL SEAL IN CUTTERHEAD ON THE CHLOE DREDGE. THE SEAL HAD A SHARP EDGE & HE CUT HIS LEFT INDEX FINGER.
EMPLOYEE WAS RUNNING THE TRACKHOE & HAUL TRUCK. HE HURT HIS BACK CLIMBING IN AND OUT OF THE HAUL TRUCK.
THEY WERE ATTEMPTING TO LOAD CONVEYOR SHUTTLE, LOAD WAS SUSPENDED IN AIR SO TRUCK COULD BACK UNDER IT. CRANE STARTED SWINGING AND TILTING ALLOWING LOAD TO FALL. LOAD STRUCK EMPLOYEE.
EE WAS REMOVING ROLLER FROM DOZER. HE ATTEMPTED TO PULL ROLLER OFF MACHINE. ONE END OF ROLLER SLIPPED AND PINNED HIS HAND. THE EE S FINGER WAS CAUGHT BETWEEN ROLLER AND ROCK ON THE GROUND. THE EE S FINGER GOT BROKE AS A RESULT. EE FINISHED JOB, THEN HE REALIZED THE FINGER WAS BROKE.
EE STATES HE WAS CLOSING THE HATCHES ON THE BULKTRUCK WHICH HAD NO LOWER LADDER. HE ATTEMPTED TOGET OFF TRUCK & SLIPPED & FELL & CUT HIS UPPER ARM ON A BRACKET.
EMPLOYEE WENT DOWN IN PIT TO START PUMP, FOUND SUCTION LINE BURIED IN MUD, TRIED TO PULL OUT ON ROPE, WHEN HE FELT PAIN IN HIS LOWER PART OF HIS BODY. HE WENT TO DOCTOR ON 7/14 WHO SAID HE HAD A HERNIA AND NEEDED CORRECTIVE SURGERY.
ADJUSTING SKIRT BOARD BELT CAUGHT HAMMER AND PULLED FINGERS OF LEFT HAND INTO BELT. CUTTING THE MIDDLE AND INDEX FINGER OF LEFT HAND.
EE WAS OPERATING A KOMATSU EXCAVATOR. THE TEMPERATURE GUAGE WAS SHOWING HOT. HE STOPPED TO CHECK WATER IN RADIATOR. HE DID NOT LET THE UNIT COOL DOWN BEFORE REMOVING THE RADIATOR CAP. THE HOT WATER PRESSURE BLEW OUT ON HIS RIGHT ARM & STOMACH.
EMPLOYEE WAS ROLLING UP WELDING CABLES. HE WAS NOT WATCHING WHERE HE WAS STEPPING AND STEPPED DOWN BETWEEN 2 CONCRETE BLOCKS. TWISTED RIGHT KNEE.
EE WAS CHANGING OUT AN OLD SCREEN CLOTH AND WAS MOVING THE TENSION BAR FROM THE OLD SCREEN. EE WAS GETTING HELP FROM ANOTHER EE. THE FIRST EE WAS PULLING ON THE TENSION BAR TO THE RIGHT WHILE THE 2ND EE HIT THE BAR WITH A LUMP HAMMER DISLODGING IT FROM THE SCREEN FRAME, PINCHING 1ST EE'S LEFT THUMB BETWEEN THE BAR AND THE FRAME.
Operator making adjustment to winch. Removed safety pin while tension was still applied to cable. Brake did not hold due to tension, winch handle spun hitting operator in the wrist & hand
Operator was attempting to release tension from a hand winch he pulled the safety pin without securing the winch handle, the brake was defective so it spun the handle, which striked the operat ors hand ors hand
EMPLOYEE WAS GOING TO CLEAN OUT THE CUTTERHEAD, EMPLOYEE STEPPED IN A HOLE IN THE CATWALK.
EE WAS STANDING AT THE NORTH END OF THE SHAKER. CO-WORKER WAS PUTTING A PATCH ON THE TOP DECK OF THE SHAKER ABOVE EE WHEN HE DROPPED THE PATCH & IT HIT EE ON HIS LEFT HEEL. THE WEIGHT OF THE PATCH BUSTED HIS HEEL OPEN REQUIRING 3 STITCHES.
WHILE REPAIRNG LEAKING PIPE, EE STEPPED INTO A HOLE WHICH WAS WASHED OUT BY PIPE. INJURING RIGHTKNEE
EE WAS WALKING TO CONTROL HOUSE AT BC9. AS HE STEPPED ON THE PLATFORM HE STEPPED ON SOME ICE & HE FELL.
EE WAS CHECKING A SOLENOID ON A WELDING MACHINE WHEN HIS THUMB GOT CAUGHT IN THE FAN.
TRYING TO LIFT A ROCK THAT WAS TOO LARGE.
WHILE PUTTING BOARDS IN PIT, BACK SLOFFED OFF CAUSING EE TO TWIST HIS KNEE EE WENT TO THE DR AND IT WAS THOUGHT HE HAD A SPRINED KNEE. HIS KNEE DID NOT GET ANY BETTER AND AN MRI WAS PERFORMED. SURGERY HAD TO BE PERFOMED ON 4-4-03 BECAUSE ITWAS DETERMINED HE HAD A TEAR IN HIS KNEE.
EE WAS WALKING DOWN THE DREDGE LADDER, FOOT WENTTHROUGH A PLACE IN THE CATWALK CUTTING HIS SHIN.
CLEANING CUTTERHEADOUT WITH SHOVEL AND PULLED LEFT SHOULDER.
EMPLOYEE WAS CLIMBING DOWN OFF HAUL TRUCK WHEN HE SLIPPED AND BUMPED HIS KNEE. EE REFUSED MEDICAL TREATMENT AT THAT TIME. ON 9/13/02 EE ASKED TO SEE THE DR BECAUSE HIS KNEE WAS STILL HURTING. THE DR TOLD THE EE TO TAKE OFF WORK UNTIL HE COULD SEE A SPECIALIST FOR HIS KNEE. THE COMPANY DID NOT RECEIVE THE INFORMATION ON THE EE BEING TOLD TO STAY OFF WORK UNTIL 9/17/02.
EE WAS WORKING ON A WATER PUMP WITH A PIPE WRENCH WHEN THE WRENCH SLIPPED OFF AND SMASHED THE EE MIDDLE FINGER ON HIS RIGHT HAND.
EMPLOYEE STATES: WHILE CONDUCTING A SHOT SERVICE, LOADING HOLES MANUALLY WITH LOADING POLE. THE POLE CAME DOWN FAST THROUGH HANDS AND JERKED NECK AND BACK.
EMPLOYEE WAS PICKING UP A METAL PLATE TO INSTALL ON A FEEDER, HE SLIPPED AND DROPPED THE PLATE ON HIS LEFT FOOT. RESULTED IN TOE CONTUSION. RETURNED TO WORK WITH RESTRICTIONS.
WHILE OPERATING FRONT END LOADER EE FELT A PAIN IN HIS RIGHT GROIN AREA WHILE LOADER WAS BOUNCING FROM ROUG TERRAIN. EE CONTINUED TO WORK ON REGULAR JOB UNTIL A FINAL DISPOSITION WAS MADE ON O CT 25TH VERIFYING A HERNIA.
TWO EE WERE REMOVING A GUARD FROM AN A.C. CRUSHER DRIVE. THE GUARD FELL, STRUCK A PIPE, AND THEN STRUCK THE EE LEFT ARM. THE EE RECEIVED A LACERATION REQUIRING 14 SUTURES.